Board-to-Board Socket Adapter suits 352-pin, 1 mm pitch BGA.
Board-to-board socket adapter consists of SF-BGA352B-B-42 female socket module, which can be soldered to motherboard using standard soldering methods without warping, and SF-BGA352B-B-41 male pin module that solders to upgraded daughter board. Both modules are constructed with high-temperature FR-4 substrate and come with lead or lead-free solder ball types. Physical length from top connection...
Read More »Bump Adapters connect 0.4 mm ICs to 0.5 mm pitch PCBs.
Offering standard pin 1-to-pin 1 routing connection scheme, which can be customized to accommodate any connection requirement, Fine Pitch Bump Adapters enable use of any SMT IC device on pitch of 0.4 mm or higher to 0.5 mm pitch PCBs designed for TSSOP and QFP packages. Adapter boards are fabricated from 0.032 in. thick FR4 or Rogers 370 HR, with -½ oz copper traces on both sides. Operating...
Read More »
BGA SMT Adapters are available in many different pin counts.
Giga-snaP(TM) BGA SMT adapter pair consists of SF-BGA316C-B-62F female sockets with machined pins epoxy over-molded into assembly that matches male pin LS-BGA316C-61. Soldered to PCB using standard soldering methods without warping, SF-BGA316C-B-62F allows 0.8 mm pitch, 17 x 17 mm body, 20 x 20 array Analog Device ADSP-BF539/ADSP-BF539F ICs to be socketed and operate in demanding automotive...
Read More »
Bar Seals and Adapter Plates suit collet chuck applications.
With Adapter Plates, users can mount collet chucks and 3-jaw chucks to wide range of spindles. Larger chuck can be mounted on smaller spindle for increased capacity, or smaller chuck can be mounted on larger spindle for increased tool clearance and speed. For applications that produce fines and dust, Bar Seal Assembly can be fitted to Royal S-type collect chucks.
Read More »
Caps and Plugs Designed for Peace of Mind
Download this engineering guide to learn more about the different caps and plugs offered, and to find the correct solution for your specific application.
Read More »Adapters connect small pitch devices to large pitch boards.
Offered in panelized form, as adapter only, or with mounted devices, Switch-A-Pitch Adapters have tops where BGA landing pads are on 0.5 mm, and bottoms with BGA balls on 1.27 mm pitch. Units are 0.062 in. thick FR4 or Rogers 370 HR, with -½ oz copper traces on both sides. Non-solder mask defined pads are finished with electroless nickel immersion gold and have solder spheres of 63/37 lead/tin...
Read More »
Fixed-Prong Wall Adapters are ENERGY STAR® EPS 2.0-compliant.
Delivering 12 Vdc output, PSA12A-120-R and PSA12E-120-R 12 W wall-mount adapters are designed for use in USA and Europe respectively. They are double insulated, Class B EMI compliant, and have no-load power consumption of less than 0.3 W. Protected against over-voltage and short-circuit, products can operate in temperature range of 0-40-
Read More »
New Thinbit® Adapters
THINBIT-®, manufactured by Kaiser Tool Company, announces an expansion to its selection of adapters for the MINI-BORE-®, MICROBIT-® and MiniGROOVE 'N TURN-® lines of tooling. The new adapters are available with 3/4 and 1 outside diameters and 1/8 , 3/16 , 1/4 , 5/16 , 3/8 and 1/2 inner diameters. These tools, along with the entire THINBIT-® line of cutting tools, will be on display at WESTEC...
Read More »
Adapters convert ratcheting wrench into thin ratchet.
Designed to fit 3/8, -½, and -¾ in., and 10, 13, and 19 mm ratcheting wrenches, ratchet adapters create low profile ratchets for space-constrained areas found in aircraft and automotive engines. Adapters can be used with -¼, 3/8, and -½ in. drive sockets, either English or Metric, as well as with spline sockets. Products use locking and release system and are available individually or in sets...
Read More »
Conversion Adapters and Gas Diffusers for Bernard® Centerfire(TM) Consumables Reduce Costs
o Fits Centerfire(TM) nozzles and contact tips to all major MIG gun brands o Allows companies to standardize consumables BEECHER, Ill., October 3, 2006 - To simplify the ordering, stocking, tracking and usage of several brands of consumables, Bernard-® offers conversion adapters and gas diffusers that fit its Centerfire(TM) contact tips and nozzles to all major MIG gun brands. By standardizing...
Read More »
DIP to SOIC Adapter features RoHS-compliant construction.
RoHS-compliant DIP to SOIC Correct-A-Chip(TM) adapter converts DIP style packaging to SOIC PCB layouts. Top is available in DIP pin counts from 8-28 pins, and bottom solders down on standard SOIC footprints. Featuring operating temperature of 221-
Read More »
Do You Have Unique Lifting Needs?
EZRig Cranes offers lifting solutions that are engineered for robust performance, providing the ultimate in portability. Designed for real-world lifting needs, our products are small and light with options and features that make them ideal for a broad range of applications. See our video to learn how an EZRig Crane can simplify your lifting requirements.
Read More »
