Hand (Tool) Clamps

Pneumatic Saw & Clamp System Cuts Steel Plate Wihout Heat Affect Zone
Electrical Equipment & Systems

Pneumatic Saw & Clamp System Cuts Steel Plate Wihout Heat Affect Zone

A pneumatic saw and clamp system that eliminates torch cutting and lets users produce clean accurate cuts on thick steel plate fast with no heat affect zone (HAZ) is available from ESCO Tool of Holliston, Massachusetts. ESCO’s APS-438 Air-Powered Saw and Quick-Clamp sets up fast using a 2”W steel track and has two wedge-style clamps that attach to steel plate up to 15’W by 3.5” thick and...

Read More »
PG 9500 REGO-FIXPG 9500 Clamping Unit holds carbide and HSS tools.
Electrical Equipment & Systems

PG 9500 REGO-FIXPG 9500 Clamping Unit holds carbide and HSS tools.

With cycle tests exceeding over 20,000 insertions and removals, PGU 9500 automatic clamping unit rely on interference between holder and collet to generate their clamping force. Using mechanical properties of holder material for generating tremendous gripping force, units take less than 10 seconds to be pressed in tool or to be removed from holder. With run-out below 0.0001 in., device's...

Read More »
Electrical Equipment & Systems

5000 Series Toggle Clamps are equipped with ergonomic safety grips.

Along with non-rotating pivot pins for longer tool, 5000 Series Toggle Clamps offer versatile mounting with weld-on or bolt-on mounting bases. Including horizontal and vertical hold-down clamps, and straight-line action clamps, 5000 Series is equipped with ergonomic safety grips and forged clamping bars for higher strength. Enhanced with DESTACO® Toggle-Lock Plus, unit avoids accidental opening...

Read More »
Vertical Acting Toggle Clamps feature vertical mounting base.
Electrical Equipment & Systems

Vertical Acting Toggle Clamps feature vertical mounting base.

Made of case-hardened sheet metal, zinc-plated, with blue passivated finish, GN 810.1 Universal Fit Steel Vertical Acting Toggle Clamps work according to toggle principle, as lever and clamping bar move in same direction. Products in U-bar version with 2 flanged washers can accommodate application specific clamping screw. Version including spindle assembly with neoprene rubber tip is available as...

Read More »
Deploying Commercial Electronics in Rugged Environments
Sponsored

Deploying Commercial Electronics in Rugged Environments

When it comes to defense, all operations require a high degree of coordination and processing. As a result, airborne intelligence, surveillance and reconnaissance (ISR) has become a crucial component of military activity. In order to maintain stealth and avoid detection, ISR missions are forced to fly at extremely high altitudes. These altitudes present a number of environmental obstacles such as extreme temperature ranges or fluctuating atmospheric pressure – most of which cannot normally be handled by commercially available components. However, because of rising costs and time delays, developing application-specific hardware is becoming less feasible. Using a real-life case study, this white paper explores in great detail a scenario in which Commercial Off-the-Shelf (COTS) components were able to be used for a critical, extreme environment application. Check out this report, and see if cost-saving commercial COTS components can possibly be utilized for your specific needs.

Read More »
Vertical Acting Toggle Clamps feature universal fit base.
Electrical Equipment & Systems

Vertical Acting Toggle Clamps feature universal fit base.

With Universal Fit horizontal mounting base that allows for both inch and metric hole pattern mounting, GN 810 Stainless Steel Vertical Acting Toggle Clamps work according to toggle principle, as lever and clamping bar move in same direction. RoHS compliant units in U-bar version with 2 flanged washers can accommodate application-specific clamping screw. Version including spindle assembly with...

Read More »

GF Machining Solutions Offers Faster Set-Ups with System 3R Delphin Clamping System
Electrical Equipment & Systems

GF Machining Solutions Offers Faster Set-Ups with System 3R Delphin Clamping System

LINCOLNSHIRE, Ill.  – The System 3R Delphin Zero Point system from GF Machining Solutions provides an affordable clamping system for use during heavy milling operations on a variety of machine tools. With the Delphin system, manufacturers can increase their overall productivity by streamlining set-ups and reducing machine idle time. The System 3R Delphin system has been optimized to handle any...

Read More »
Boiler Tube Joint Alignment Tool helps minimize weld failure.
Electrical Equipment & Systems

Boiler Tube Joint Alignment Tool helps minimize weld failure.

Made of precision machined high strength steel, Esco HOG TIE® Boiler Tube Weld Alignment Clamp rapidly and accurately aligns boiler tube ends to minimize risk of failure from misalignment when welding water wall boiler tubes. One side has 2 through-holes and other has threaded inserts which accept 2 bolts that draw them together, exposing tube ends for tack welding before removal to finish...

Read More »

Fixtureworks Offers Extensive Lineup of 'One-Touch' Manual Clamps
Electrical Equipment & Systems

Fixtureworks Offers Extensive Lineup of 'One-Touch' Manual Clamps

Fixtureworks® (Fraser, MI), a leading supplier of fixturing accessories, machine tool elements and material handling components offers an extensive new lineup of One-Touch manual clamps.  One-Touch clamps offer easy and efficient clamping and unclamping of a workpiece in one simple operation. Each clamp is designed to eliminate the need for tools when applying the clamping force and helps...

Read More »
Latch Clamps feature compact and sturdy design.
Electrical Equipment & Systems

Latch Clamps feature compact and sturdy design.

Available in metric sizes, RoHS-compliant GN 854 Latch Clamps with Trigger Function have sturdy, compact design that permits use under such demanding conditions as exposure to elevated temperatures, dust, and spray mist. Catch allows forced loosening of clamp by clamping arm moving pulling latch forward. While clamping bearing/clamping arm are made of forged, weldable, blank steel, pulling...

Read More »
Crocodile Clamps feature infinitely adjustable design.
Electrical Equipment & Systems

Crocodile Clamps feature infinitely adjustable design.

Available in metric sizes, with or without clamping bolt or stud bolt, No. 6312 V Crocodile Clamps can be expanded for every clamping height. Compression piece and adjustable holders are connected permanently to clamp body, so clamp can be used quickly. Clamp body is equipped with 2 varied clamping surfaces and can be turned to use either side. Made of tempered steel, Crocodile Clamps are...

Read More »
5 and 13 Micron Resolve Columns
Sponsored

5 and 13 Micron Resolve Columns

Jordi Labs provides materials solutions that set the standard for innovation and quality. Our line of GPC and GFC columns are on the cutting edge of precision manufacturing and a result of our uncompromising commitment to quality and customer service. See our video to learn more.

Read More »

All Topics