Wrenches

New Folding 11-Piece Hex Key Set from Klein Tools Comes with Nylon Handle

New Folding 11-Piece Hex Key Set from Klein Tools Comes with Nylon Handle

Equipped with 1/2, 3/8, 5/16, 1/4, 7/32, 3/16, 5/32, 9/64, 1/8, 7/64, and 3/32-inch blades and can open independently up to 270 degrees. Hex-key ends are square-cut, full-depth fit and maximum contact with the socket to prevent slippage and stripping. Blades are made with tough, heat-treated alloy steel and range from 3.5 to 4.5 inches long.

Read More »
Ratchet Socket Wrench Kit offers workers reach, flexibility.

Ratchet Socket Wrench Kit offers workers reach, flexibility.

With extended sockets, 511X Ratchet Socket Wrench Kit- helps users tighten difficult-to-reach nuts. Design helps reduce risk of injury- as well as- increase leverage and swing width. Kit features Model 51QR ratchet handle and- 5 hexagonal deep well sockets –- 7/8, 15/16, 1 1/16, 1 1/8, and 1 -¼- in. – that are all 3 -½ in. long. While Bolt-Thru design lets bolts pass entirely through...

Read More »
Pneumatic Impact Wrench resists dust and harsh environments.

Pneumatic Impact Wrench resists dust and harsh environments.

Delivering 59–1,217 lb–ft of torque, CP82 series includes 9 models that cover 3/8–-¾ in. square drives with ring, pin, dual, as well as quick change socket retainers. Impact wrenches, suited for industrial maintenance applications, feature aluminum alloy clutch housing, reinforced back plate, and protective cover. Twin hammer clutch mechanism and hard chromium liner lend to reliability,...

Read More »
Adjustable Wrenches are corrosion resistant for use in critical areas.

Adjustable Wrenches are corrosion resistant for use in critical areas.

Made of 400 series stainless steel, Adjustable Wrenches come in 6, 8, 10, and 12 in. sizes, with or without PVC grips. Units lock into position when user applies pressure, assuring knurls will not loosen and jaws will not slip. Hardened steel can be autoclaved and tolerates caustic cleaning solutions. Minimizing ferrous contamination risk, tools are suitable for maintenance in health care, food...

Read More »
A & E Hand Tools Introduces the 9/16  Extra Long Automatic Slack Adjuster Wrench

A & E Hand Tools Introduces the 9/16 Extra Long Automatic Slack Adjuster Wrench

Racine, WI - (January 15, 2009)- A & E Hand Tools would like to introduce their new 9/16 Extra Long Automatic Slack Adjuster Wrench (Part no. 8569) under the Kastar Hand Tools brand. This specialty wrench is used for brake service and slack adjuster installation on heavy-duty trucks equipped with Bendix-® automatic slack adjusters. Used to turn the manual adjuster hex. Extra deep hex allows...

Read More »
Hydrant Wrench features double handle, ratcheting design.

Hydrant Wrench features double handle, ratcheting design.

Designed to loosen and tighten operating nuts on US-style hydrants, Model 252F is 33 in. long and available with 1-½, 1-¾, and 2 in. pentagonal sockets. Tool is suitable for use by one operator and may be used by 2 workers to turn difficult hydrant operating nuts. For safety, wrench's design allows user to always face roadway when working. Reversing control located in head of wrench reverses...

Read More »
Hydraulic Impact Wrench delivers 515 lb-ft output torque.

Hydraulic Impact Wrench delivers 515 lb-ft output torque.

Made of lightweight machined aluminum, ENFORCER(TM) Model HIW716ENF expedites hole drilling or hardware tightening and loosening. Tool is equipped with 7/16 in. Tri-ball quick chuck, which provides secure hold on standard 7/16 in. hex drive bits and accessories. With adjustable torque selector spool, wrench can be set at low and high setting of torque, or feather up gradually to desired torque...

Read More »
Stanley Proto Expands its Spanner Offer

Stanley Proto Expands its Spanner Offer

Major product line expansion introduces three new designs, and also adds sizes and finishes to existing lines. Conyers, GA, March 11 2007 - Stanley Proto announces a major expansion to its line of spanner wrenches, including the addition of two spanner types that are entirely new to Proto. It also includes new additions to complement the company's existing spanner line. All told, the company is...

Read More »

Spud Wrenches feature openings from 9/16 to 2 in.

Available in 39 models, Proto Spud Wrenches have conical-shaped handles ranging from 12-29 in. long that let workers align bolt, rivet, and flange holes. Protoblack(TM) black oxide finish provides non-slip grip in dirty work environments. Featuring offset heads, open end models let users quickly reposition tool during fastening, while box end versions are mostly used for final tightening and...

Read More »
Impact Driver and Wrench have 2-speed, cordless design.

Impact Driver and Wrench have 2-speed, cordless design.

Offering respective torque ratings of 1,155 and 1,290 lb-in., SID 121-A and SIW 121-A cordless impact driver and impact wrench feature dual spindle bearings and drop-resistant casing made from glass fiber composite. Triple LED system illuminates work area without shadows, and 2 digitally controlled speeds promote screw fastening performance. Products, available with 3.0 Ah NiMH or 2.0 Ah NiCd...

Read More »
Dies & Stamping Services with Over 25 Years of Experience
Sponsored

Dies & Stamping Services with Over 25 Years of Experience

PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.

Read More »

All Topics