New Machinery & Machining Tools Products

Angle Cutter is designed to cut split face block.

Powered by 15 A, 3,500 rpm motor, model 4114 has 14 in. blade diameter and 5 in. cutting capacity. Position of tool body, adjustable from 0Ã-º to 80Ã-º, operates independently of cutting depth. Tool base can be removed for cutting closer to walls, while guide wheels on tool guard ensure smooth travel over surface material. In addition to vacuum attachment port, cutter features Super Joint...

Cordless Combo Kit utilizes LXT lithium-ion battery.

Four-piece 18 V Cordless Combo Kit, Model LXT401 includes Model BHP451 560 lb-in. Hammer Driver-Drill, Model BSS610 6 Ã-½ in. Circular Saw with built-in dust blower, Model BJR181 tool-less reciprocating saw, Model BML185 4-position adjustable flashlight, 45-min Optimum Charging System, and two 5.0 Ah Li-Ion batteries. Supported with 2 steel ball bearings, 4-pole motor generates energy every...

Table Saw cuts 4x material in single pass.

Powered by 15 A, 4,800 rpm motor, model 2704 has 10 in. blade diameter and can rip 4 x 8 sheets of plywood. Max cutting capacities are 2Ã-½ and 3 5/8 in. at 45Ã-

Splices suit 600 V to 35 kV applications.

Color-KeyedÃ-® Cast Copper Reducing Splices offer constant outer diameter that enables crimping of both ends with same tool or die, and facilitates insulation with clear heat-shrink wrap or watertight clamshell covers. Constructed of tin-plated, sand-cast copper for conductivity and corrosion resistance, splices include chamfered barrel to facilitate wire insertion. Applications include...

The Real Cost of Falls and Other Workplace Injuries

When it comes to workplace falls and accidents: inattention to problematic situations and the lack of an appropriate safety plan will cost you on multiple fronts. Our guide covers all the areas of concern to make sure you're protected against risk.

Inserts suit high-production milling applications.

Featuring 4 helical 0.315 in. long cutting edges, MINITANG T490 E90LN Inserts can be used for machining 90Ã-

Parting and Grooving Insert features direct jet cooling.

DO-GRIP parting insert is available with JET-CUT system, which features coolant hole that passes through insert to outlet near cutting edge. This applies coolant where it needs to go while simultaneously cooling insert internally. Designed for operations on stainless steel and high-temperature alloys, DGNC inserts come in .118 and .157 in. widths in C- and J-type chipformers and work with...

Abrasive Grinding Wheels suit stainless applications.

Charger(TM) Plus depressed center wheels feature blend of zirconia alumina and aluminum oxide abrasives that facilitate cutting and grinding of stainless steels. Available in Ã-¼ and 1/8 in. thickness, wheels produce smooth grinding action that helps reduce operator fatigue. Clean bond contains no sulfur, iron, or chlorine, eliminating opportunity for contamination. Available products include...

Modular Tooling helps reduce compressed air consumption.

Combining vacuum cartridge, DURAFLEXÃ-® suction cup, and Vacustat check valve, Ultimate PMAT aids in construction of energy-efficient vacuum-end effector tools for automated material handling applications. Modular automation tooling solution, made of hard-coat anodized aluminum, assembles on-site without welding or use of special tools. Swivel arm assembly is powered by multi-stage...

Collection System captures loose-fill packaging for re-use.

Designed to facilitate recycling and re-use of loose-fill packaging, collection system employs grated hopper that serves as packing station while allowing overspill from overhead dispensing to pass through grate and into collection hopper. Material from hopper can be removed manually or air-conveyed back into bins containing virgin loose fill materials. Systems perform equally with any Storopack...

Rewinder handles soft, nonwoven products.

Automatic ENR-1000 Series can unwind, perforate, slit, and rewind predetermined number of nonwoven product sheets per roll. It produces six 7 in. wide finished rolls/log at up to 15 logs/min, providing 90 finished rolls/min. Web widths range from 12-42 in. and max rewind diameter is 10 in. Servo-controlled rotary shear perforator enables infinite pitch length adjustment from 6-24 in....

Innovative Dampney Coating Systems Suit Even the Most Specialized Applications

Dampney's high performance coating systems provide protection against extreme weather, chemicals, and corrosive environments for atmospheric, immersion, and underground applications. Check out the video to learn more.