Single Hybrid Transformer has hipot rating of 1,500 VAC.
SPT-060 600ohm:600ohm transformer connects 2-wire port to 4-wire transmit and receive port. In single hybrid configuration, it delivers 35.0 dB minimum TransHybrid Balance over frequency range of 300 to 3500 Hz. SPT-060 meets FCC Part 68 longitudinal balance requirements. It has dimensions of 0.540 in. max length x 0.535 in. max width x 0.535 in. max height. Printed circuit board usage is minimal...
Read More »
Gearmotors/Speed Reducers operate at 95%+ efficiency.
90.1 Series helical bevel gear products are available as triple- or quadruple-reduction drives with foot, flange, or shaft mount configurations. They offer power ranges from 1/6 to 200 HP, output speeds from 0.1 to 218 rpm, torque up to 283,200 lb-in., and gear ratio ranges from 8.04:1 to over 300,000:1. Unicase(TM) housing eliminates oil leakage and contamination. Autovent sealing prevents...
Read More »
Frequency Converter transforms single phase to three phase.
Compact BL3X350 delivers 350 VA per phase of clean, regulated 3-phase ac power from single phase input. Digitally controlled waveform produces clean power while protection circuitry provides for voltage fold back during overloads to maintain undistorted waveforms. Switch selectable, single phase input accepts 115 or 230 Vac at 47-440Hz, so it can accept any worldwide, shipboard or aircraft single...
Read More »
Power Relay is available with Class F insulation.
AZ761 10A, SPDT miniature power relay requires 250 mW of coil power and runs approximately 10 deg C cooler than standard AZ761 relay. With isolation spacing of 10mm and dielectric strength of 5000 Vrms, it has full UL, CUR and VDE approvals. Relay is suited for many HVAC and white goods applications where high ambient temperature might pose problem for other relays.
Read More »
Understanding Food & Beverage Lubricants
The term "food-grade lubricants" may sound like another name for food oils such as cooking spray, salad dressing, lard, or canola oil, but it actually refers to lubricants that are safe for use in food processing equipment.
Read More »
PCB Interfaces provides up to 300 I/Os per connector.
FleXYZ interfaces provide flexibility in X, Y, and Z axes by specifying number of rows, pins per row, and desired board spacing with standard interconnects. YTT Series headers and YTW Series board stackers mate with YTQ and YTS Series sockets to provide board spacings from 0.329 to 1.165 in. By using YTE Series elevated socket, board spacing can be increased to 1.705 in. Interconnects have 4-6...
Read More »
RF Edgeboard Connector accepts RG59 or RG6 cables.
F Type V-Bite(TM) RF edgeboard connector offers up to -40.3 dB return loss at 2.3 GHz. 75 ohm connector is engineered for signal integrity in RF applications, and snaps and locks into place for secure PCB retention during hand or re-flow soldering. It is supported both above and below board to minimize stress on solder area. Manufactured of machined brass, and employing straight-through contact...
Read More »Solid-State Switch allows mechanical operation.
Solid state switch can be supplied with maximum of 100 psi or 29.9 in. Hg. Adjustment ranges from 0.5 to 100 psi or 1 to 28 in. Hg. Integrated circuit, actuated by magnet located in operating plunger, produces digital output. Supply voltage is 4.5 to 24 Vdc. Mounting styles are flush mount, panel mount, pipe thread and manifold mount.
Read More »Power Supply modules provide 3000 VAC isolation.
M-Series miniature modular AC/DC switching power supplies are available with 5W to 30W output power ranges. All models accept universal input over range of 85-265 VAC or 100-340 VDC, and provide single/dual/triple outputs from 3.3 to 24 VDC. With UL/CSA/TUV/CE approvals, units offer integral power-good LED indicators, output adjustment potentiometers, and are fully encapsulated. Operating...
Read More »Emergency Stop Pushbutton has large, red actuator.
A01 Series is available with 1.575 or 0.945 in. dia red actuator button with white engraved arrows. If problem occurs, operator pushes button and power shuts down instantly, breaking 2 pairs of switch contacts. Double break opens both sides of power line for safety. To re-establish power to machine, switch button is rotated in direction of engraved arrows, which reconnects switch contacts and...
Read More »
Lightning Protector handles up to 20,000 W.
Category 5 High Current protector offers full 20,000 watts of protection and field-tested (with 8/20 micro waveform) real-time CAT 5 functionality. During tests, units were tested repeatedly at 6kV/3kA without failure. Peak voltage seen at output was 33.2 Volts. Protectors are also available for both analog and digital phone circuits, which make them suitable for Voice over IP.
Read More »
Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary
For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.
Read More »
