New Electrical Equipment & Systems Products

Batteries suit telecommunication and UPS applications.

Rechargeable, sealed lead acid Power Guard Series includes AGM type 6 and 12 V batteries designed for 10-year life in standby applications. They feature threaded copper insert terminals, heavy-duty plates, and flame retardant cases and covers. Capacities at 10-hr rate range from 28-210 Ah.

Databus System monitors status of motors and lighting.

Suited for crane, vehicle, and utility applications, self-contained MiniBus(TM) digital multiplex system is specifically designed for switching high-amp dc motors and operation of lighting on vehicles. It minimizes wiring as units are linked by single electrical cable. If needed, multiple loads can be added to system.

Industrial Ethernet Switch operates from -40 to 85-

With 10-30 Vdc power input, 5-port 10/100 Mbps Model ADAM-6520I supports full/half duplex flow control, MDI/MDI-X auto crossover, 4,000 Vdc Ethernet ESD protection, and flexible mounting options. It provides broadcast storm protection and 3,000 Vdc surge protection for power line as well as embedded switch controller that supports auto-negotiation.

Snap-Action Switches are RoHS-compliant.

Rated for 100,000 cycles under load and 1,000,000 mechanical cycles, microminiature MDB Series features silver contacts and is available with pin, hinged lever, roller lever, and simulated roller lever actuators. Contact configuration options include NO, NC, and change-over, while terminal options include PCB, right angle, and solder terminal configurations. Switches carry 3 A @ 125 Vac rating...

Why Use A Locking Cord?

Learn about the benefits of using locking cords in applications that rely on extensive technological infrastructures.

Emergency Inverters deliver continuous power for lights.

Power-interrupt system, PCF-84, provides 90 min of universally compatible emergency power to operate CFL, linear fluorescent, incandescent, or resistive loads up to full rating of system. Fast-transfer line voltage to emergency power system, PCF-FT, turns any fixture into emergency lighting fixture. It operates HID lighting as well as other critical loads that do not tolerate interruptions during...

SPDT Switch suits applications with fast settling times.

Fabricated on 0.5-micron gate-length GaAs pHEMT process, MASWSS0192 features nominal settled on resistance of 2.5 ohm with less than 0.15 ohm change after 15 Ã-µs. This 0.5-3.0 GHz SPDT 3.0 V switch has typ insertion loss of 0.18 dB, isolation of 24 dB, and full passivation. In addition to RoHS-compliant, lead-free SC-70 (SOT-363) packaging, switch features power handling capabilities with...

Synchronizer suits ATCA, AMC, and MicroTCA applications.

Single-chip ZL30117 is capable of generating less than 1 ps rms of jitter in full compliance with OC-48 and STM-16 requirements. Adaptable unit, which consumes under 0.9 W of power, accepts 3 reference inputs - supporting clock frequencies in any multiple of 8 kHz up to 77.76 MHz as well as 2 kHz. Holdover capability enables it to ride out complete loss of incoming reference; PLL continues to...

Fiber Optic Blade is designed for IntellaPatch matrix switches.

Featuring 16 ports, 100/1000 Mb/s Ethernet Fiber Optic blade supports layer-1 switching of fiber-based Fast Ethernet and Gigabit Ethernet traffic. Any 100 or 1000 Mb/s fiber or copper Ethernet signal can be automatically converted to copper or fiber Ethernet, respectively, or between single-mode and multimode, and then switched to any other port for output. Blade enables interconnection of...

Interface Module comes in 4, 6, and 8 positions.

Available in both RJ-11 and RJ-45 types, jack-style Model IMRJ provides means of interfacing between various types of equipment that use Ethernet/RJ type connections and individual wiring. It features modular DIN rail base with clearly ink-marked terminal blocks. Special sizes, circuits, and custom labels are available.

Three-Phase UPS features true on-line design.

With input voltage of 208, 220, and 480 Vac, FirstLineÃ-® UPS suits 10, 15, and 20 kVA applications. Transformerless power technology provides blackout protection and power conditioning, while front-end harmonic correction eliminates need for additional filtering. Double-conversion technology protects connected load from sags, swells, harmonics, noise, and voltage imbalances. Control panel on...

Trotec Laser Offers Customizable Industrial Laser Marking Solutions for Any Application

Trotec's laser marking solutions provide your company with configurable workstations and intuitive, customizable software. Check out our video to learn more.