New Electrical Equipment & Systems Products

Resettable Circuit Protector complies with IEEE802.3af.

Surface-mount PolySwitchÃ-® SMD050-2018 provides resettable overcurrent protection for Voice Over IP and powered Ethernet equipment. Should any power control FET fail short, unit shuts down individual port and helps prevent system-wide power failure. Once fault condition and power are removed, device resets and allows affected equipment to return to normal operating conditions. Device helps...

DC-AC Inverters power large LCDs.

Dimmable Series 8mAD 2-tube inverters power LCDs in 10.4 and 12.1 in. diagonal size range that are backlight by one pair of CCFLS (cold cathode fluorescent lamps) in conjunction at either end of LCD panel using one output connector. Inverters offer on-board connectors and can be dimmed to less than 5% duty cycle using external analog control signal or external PWM generator. Products measure less...

Servo Motors handle frequent stop/start applications.

Series 22-100 DSD 3-phase, 540 V, synchronous servo motors, are available in sizes 22, 28, 36, 45, 56, 71, and 100. Units can be configured with or without fans and can include standard or high-resolution encoder and power connectors. Torque ratings vary from under 5 N-m to 300 N-m max. Torque overload capability is rated up to 300%. Inertia ratings vary from 18,000 JsecÃ-² to 110,000+...

Electronic Ballasts feature instant-start design.

Optanium(TM) Ballasts for T8 lighting systems are offered in standard and low-watt designs with ballast factors of .88 and .78, respectively. Independent lamp operation allows other lamps to continue operating if one or more lamps should fail. Operation between 40 and 50 kHz helps prevent interference with infrared control systems. Ballasts are available for 1, 2, 3, or 4 lamps, on both 120 and...

Customized Silicone Technology: For Today's and Next Generation Electronic Applications

This white paper provides and in-depth overview into the customized silicone technology for electronic protection.

Connectors seal out harmful elements.

ST Liquidtight metallic connectors and hubs safety connect flexible metal conduit, while sealing out oil, water, dirt, dust, and fumes. Pull-out protection is 4 times greater than UL requirements. Connectors are made of malleable iron or steel and come in straight, 45Ã-

Inverters offer selectable switching frequency to 15 kHz.

CFW-08 Plus micro inverters include 10 hp (3 phase 460 Vac), 5 hp (3 phase 230 Vac,) and 3 hp (single phase 230 Vac) and allow variable frequency drive to be applied in a variety of industrial uses. Features include sensorless vector operation, dynamic braking, optional remote keypad with copy function to simplify multi-drive set-ups, and serial communications including Modbus-RTU in addition to...

DC-DC Converters feature miniature DIP package.

Fully encapsulated Series SB05 provides output power of 5 W. Converters accept single-range and 2:1 wide range inputs from 9-75 Vdc, and provide single and dual outputs from 3.3-24 Vdc. All contain short circuit protection, internal input filter, and 1600 V input-to-output isolation. They operate over temperature range of -25 to +71Ã-

Switching Power Supply provides 700 W.

Model PFC700-S modular, power factor-corrected switch-mode power supply provides single isolated output of 600-700 W continuous power. It corrects input current waveform to better than 0.99 power factor at supply's full load of 120 Vac. Open frame unit featurs current sharing as standard with hot swap capability as option. Output voltages range from 2-48 V. Unit is HALT tested and compliant with...

Switchgear has high current rating.

HVL/ccÃ-® Medium Voltage Metal-Enclosed Switchgear provides increased capacity with 1200 A continuous current rating at 5-17.5 kV, making it suitable for main-feeder, main-tie-main lineups in plant and building applications. Isolated bus, cable, and main switch compartments prevent access to live parts while changing fuses. Electrical life is increased to 26 full load and 1000 mechanical...

Development System meets PICMG 3.0 specification.

AdvancedTCA(TM) incorporates full mesh 14-slot backplane installed in 12U, 84HP subrack. Integral cooling unit, with 3 fans, handles heat dissipation up to 120 W per board. Enclosure provides redundancy through dual IntelÃ-® ZT 7101 shelf management controllers and dual 48 V, 60 A power input filters supplying 48 Vdc power. Open, multi-vendor ATCA(TM) architecture suits telecom, datacom, and...

DoorKing Releases Advanced Long Range Card Reader System with Frequency Hopping Technology

The DoorKing DKS AVI system is at the cutting edge of automotive security technology and represents a leap forward in engineering innovation. When it comes to long-range passive card readers, we lead the industry and set the standard for quality and performance. To find out why the DoorKing DKS AVI system is taking the automotive security industry by storm, see our video.