New Electrical Equipment & Systems Products

Tool Switches provide speed control.

Single-pole, single-throw N Series Switches are rated for up to 200,000 operation cycles and have contact current ratings of 10 A at 125 Vac or 6 A at 250 Vac. Line voltage wires can be terminated by screw or push-in methods. Motor and capacitor connections are push-in. Switches are suited for professional power tools such as drills, drivers, hammer drills, shears, and nibblers. They can be...

Integrated Li-Ion Linear Charger does not overheat.

Housed in 6-lead, 2 x 2 mm DFN package, single-cell LTC4059 monitors and reports value of charge current. System requires input capacitor and charge current program resistor. With proper PCB layout design, product can safely charge single-cell, Li-Ion battery from 5 V input at up to 900 mA. Thermal regulation scheme automatically reduces charge current as necessary during high ambient temperature...

Microphone Preamplifier IC suits audio applications.

Packaged in 28-lead SSOP, PGA2500 digitally controlled microphone preamplifier IC (integrated circuit) is suited for use as front end for analog-to-digital converters in audio applications. It has gain range of 10-65 dB, 1 dB per step, and gain settings and internal functions are programmed using 16-bit control word loaded via serial port interface. Features include differential signal path,...

Ethernet Switch features internal intelligence.

Five-port BusWorksÃ-® 900EN-S005 provides auto-negotiation of 10/100 Mbps data rate, full/half-duplex flow control, and crossover signal compatibility. Integrated 128 KB high-speed SRAM frame buffer is shared by all 5 ports and supports 1.4 Gbps memory bandwidth. Internal intelligence enables connect-and-go operation. Hardened for hostile environments, switch accepts 15-36 Vdc and operates...

No Pencils Required: From Thinking to Knowing Through Mobility

This ebook provides a detailed guide on how mobility and digital data management systems (DDMS) can increase your company's overall effectiveness and efficiency.

Brushless DC Servo Motors come in 22 and 36 mm frame sizes.

Based on 2 frame sizes, motors offer typical operating speeds from 2,000-8,000 rpm and continuous stall torques from 2-20 oz-in. Length of motor may be customized to meet unique requirements. For complete motion package, they can be supplied with 2,000 quad count optical encoder as well as optional Acme screw output.

Power and Grounding Connectors meet UL and CSA requirements.

PAN-LUG(TM) copper compression lugs and splices meet NEBS Level 3 requirements. PAN-LUG Copper HTAP System features slotted design and snap-on clear cover that allows 360Ã-

Separator protects a/c recovery/recycling equipment.

Connected between recycling equipment and vehicle, Recycle Guard(TM) determines which vehicles contain sealant, deteriorated lubricant, or excess dye and traps contaminants before they enter recovery machine. Sealant, dye, and lubricant separator features 2 high-porosity filters that trap sealants, dye, and lubricants. It catches both Type 1 (moisture reactant/leak stop) and Type 2 (seal sweller)...

Strain Relief Connectors provide pullout protection.

Grip-Tite Connectors help secure and seal cords or cables entering enclosure or cabinet. Two-piece internal design features nylon gripper coupled with neoprene grommet. Body and gland nut are malleable iron with protective zinc electroplate finish. Suited for NEMA 4 enclosures and other wet locations, connectors are rated liquidtight, oiltight, and raintight. Sizes range from Ã-½ to 3 in....

Continuous-Flex Cables perform multiple tasks.

Suited for use in Energy Chain SystemsÃ-®, ChainflexÃ-® CF130US and CF140US continuous-flexing tray cables withstand stress of tight bending radii. Flame-retardant CF130US (unshielded) and CF140US (shielded with tinned copper) are constructed with TFFN/THHN insulation and UV- and oil-resistant PVC jacket. Approvals include Tray Cable for Open Wiring, Machine Tool Wire for general wiring,...

Welder/Generator incorporates Kohler LPG engine.

Multi-process Ranger(TM) 250, powered by low-emission liquid propane gas, utilizes Chopper Technology(TM), which provides smooth arc and low spatter. It delivers 250 A for welding at 100% duty cycle and 9,000 peak W of 120 V/240 AC generator power. Welder features downhill pipe welding mode, arc control adjustment, and touch-start TIG mode. Its 20 hp CommandÃ-® LPG OHV engine features...

Clear Clogged Drains Faster with General Pipe Cleaners' Kinetic Water Ram

The Kinetic Water Ram by General Pipe Cleaners clears out clogged pipes quickly using kinetic energy. The Ram is so simple to operate, anyone can use it. Check out the video to learn more.