New Electrical Equipment & Systems Products

A/V Component is equipped with RS-232 interface.

Panamax MAXÃ-® 5410 Pro custom, installer-centered component distributes clean power to systems in automated homes and features RS-232 interface for home automation system compatibility. It has 12 V-in and -out triggers that control start-up, shut down, and automation functions; surge protection; and component-specific power conditioning. Additional features include 6 LED diagnostic lights;...

Switching Regulator is designed for CPU power.

Series SR50 consists of 5-bit, adjustable, synchronous, non-isolated, step-down DC/DC converters that support 6 Voltage Identification (VID) codes and choice of 2 physical configurations. Input and output ranges from 3.3-12 V and 0.9-5 V, respectively. Synchronous rectifiers operate at 400 kHz switching frequency and can be synchronized to external clock. Series has multilayer PCB construction,...

Quad-Channel Power Supply Unit utilizes digital design.

Model THPS-400 digital, 4-channel power supply unit has integrated totalizer with count-up or countdown options; user selected filtering of readings; and RS-232, RS-485, or Ethernet communication. It also offers simultaneous display of all 4 channels or selective blanking of unused channels, ratio control with analog outputs, and menu-driven calibration and setup. Construction includes all-metal...

Managed Switch makes backbone connections up to 550 m away.

Strengthening backbone connections for small- to medium-sized networks, TigerSwitch(TM) model SMC6709FL2 consists of intelligent, standalone Ethernet switch with 8 auto-MDIX 10BASE-T/100BASE-TX ports and one 100BASE-FX MMF port. It connects to distant backbone up to 5 km away via 100BASE-FX MMF/SC port and has 2.0 Gbps aggregated bandwidth and non-blocking switching architecture. Features include...

Bulk Briner 101: What You Need to Know When Considering a Bulk Briner

If you're thinking about switching from packaged to bulk salt, check out this white paper and see if a bulk briner is right for your application.

Vibration Switch provides predictive maintenance.

Model 685A01 is a 24 Vdc powered, electronic vibration switch with explosion-proof housing. It provides early warning of machine deterioration and will shut machine down when trip level is exceeded. Unit includes Form C relay, adjustable trip point, local and remote reset, and continuous or latch relay operation. Operating range is 0-10 g's from 10-1,000 Hz, making it suited for pumps, fans,...

Step Motor/Driver offers optional built-in encoder.

SilverPak 17 is a NEMA size 17, 2-phase, 1.8Ã-

Power Supply is designed for spas and hot tubs.

Model R1005 is a single 12 V output power supply rated at 180 or 350 W with power inputs of 120 or 240 Vac. Output is adjustable from 12-14 Vdc. Unit is ETL certified to meet UL/CSA standards for spa and hot tub usage, providing power needed for water-resistant audio, communication, and control equipment. Shielded and grounded transformer eliminates shock hazards, and weather-sealed enclosure...

Synchronous Buck Driver works with DC/DC converters.

Offered in HTSSOP-14 PowerPAD(TM) packages, UCC27223 driver utilizes Enable pin and proprietary Predictive Gate Drive digital control technology to reduce diode conduction and reverse recovery losses in synchronous rectifier MOSFETs. Employing closed loop feedback system that detects body-diode conduction, Predictive Gate Drive adjusts dead time delays in next switching cycle. It also has Ã-

Gigabit Ethernet Switch Module has 4 ports.

IBM eserverÃ-® BladeCenter(TM) consists of Layer 2 Ethernet Switch module that provides filtering and Virtual Local Area Networks (VLAN) capability. Product enables up to 4 Layer 2 Ethernet switch modules to be installed in BladeCenter type 8677 chassis. Total allowable configurations never exceeds maximum of 4 switches.

Bolt-Type Connectors are rated for currents to 400 A.

Bolt-type panel/plate mountable feedthru and junction block connectors have modular design and do not require mating connectors. Stud-type junction block connectors incorporate steel plated studs on non-feed-thru models; feed-thru connectors have copper alloy. Products are available in 1/4-20, 3/8-16, 1/2-13 in. sizes with respective termination ratings of 100 A, 1,500 V; 250 A, 1,500 V; and 400...

SEALTITE® Fittings and Cord Grips Offer Longer Lasting Protection

Anamet Electrical's 316 Stainless steel SEALTITE® fittings and UL-listed cord grips protect sensitive wiring components from fluids, corrosive contaminations, bumps, and abrasions with a steel core and liquid tight conduit jacket. Check out this video to learn more.