New Electrical Equipment & Systems Products

High-Density FPGAs offer design flexibility.

Industrial-grade Stratix(TM) FPGAs, models EP1S80 and EP1S60, promote design flexibility in military, aerospace, and industrial systems. Model EP1S80 provides 79,000+ logic elements and 7+ Mbits of internal memory. Offered in industrial (-40 to +100Ã-ºC) and extended temperature (-40 to +125Ã-ºC) versions, Stratix devices are built on 0.13 micron, all-layer copper process. They feature...

Hub Board is PICMG 3.0/3.1 compliant.

Model ATS-1136 Switch Blade is an AdvancedTCAÃ-® hub board for Dual-StarFabric based ATCA shelf. It features 36 Gigabit Ethernet ports in 8U specification and switches base and fabric at Gigabyte Ethernet wire-speed. Unit offers two 10/100/1000 Gigabit Ethernet copper egress ports on front panel and three copper 10/100/1000 ports on rear panel. System management of temperatures and voltages...

Power Distribution Units offer optional current monitoring.

Series V42 and V70 measure 2 x 2 in. and come in vertical heights of 42 and 70 in. Depending on version, units provide 12-32 receptacles, 14 different voltage and current configurations, and can be configured with straight blade or locking receptacles and plugs. Max power cable length is 15 ft. Optional EMI/RFI filtering protects equipment from electrical noise, and 2-digit display shows current...

DC/DC Converter suits space-constrained applications.

Model LT3436 is a 3 A, 800 kHz step-up converter in thermally-enhanced, 16-pin TSSOP package. Input voltage of 3-25 V enables unit to operate from single cell Li-Ion batteries up to fixed 24 V input rails, delivering outputs up to 35 V. Constant 800 kHz switching frequency, synchronizable from 1-1.4 MHz, allows designers to keep switching noise out of noise-sensitive circuitry. Operating supply...

Caps & Plugs Designed for Peace of Mind

Download this engineering guide to learn more about the different caps and plugs offered, and to find the correct solution for your specific application.

CMOS Bus Switches suit hot-plugging applications.

Pin-compatible with existing TTL parts, 20 bit, dual-port switches operate from supply voltages of 4-5.5 V. They have power-down protection on inputs and outputs and offer latch-up immunity and ESD protection to 2 kV. Off resistance and On resistance, typically rated at 2-25 ohm, maximize isolation when Off and minimize loading when On. Power dissipation is typically 1 Ã-µA. Devices are...

Positioning Motor offers speeds of more than 100 ips.

Positioning Motor consists of 3-phase AC motor connected to frequency drive, controlled by embedded microprocessor board with speed and position encoder, all integrated in one housing. Up to 16 pre-configured motion steps, including speed, position, and torque, can be selected via 4 binary input signals. When attached to LM 3 or LM 4 linear belt driven actuator, fast x, xy, or xyz positioning...

Surface Mount Reed Switches have ultra-miniature design.

Series RI-80SMD SMT Switches offer 5 mm max glass length and wide, flat lead for stability during component placement. Rated at 5 W, units come in 3 different Gull or J lead configurations, which measure just .279 in. Tape and Reel packaging facilitates automated processing.

CHP Energy System is rated at 85 kW.

ENI 85 combined heat and power (CHP) on-site energy system features natural gas-fired engine and is suited for base load and waste-heat utilization applications. It supports peak and full load requirements and provides full power in case of utility outages. Pre-engineered, packaged design supports indoor and outdoor installations. Waste-heat applications can provide chilled and hot water to...

Step-Up DC/DC Converter offers true output disconnect.

Model LTC3421 is a 3 MHz, current mode, synchronous boost DC/DC converter suited for Li-Ion and single/multi-cell alkaline/NiMH applications. Internal switches provide 3 A current limit and deliver output voltages up to 5.25 V from input voltage of 0.5-4.5 V. Converter delivers up to 1.5 A of continuous output current from 2 alkaline cells. Synchronous rectification enables efficiencies of 96%...

Triple Video Driver offers HD/SD filtering capability.

Selectable for High Definition (30 MHz) or Standard Definition (8 MHz) signal filtering, FMS6418A removes high-frequency noise prior to digitizing signal or artifacts introduced during D/A conversion in encoder for RGB or YUV signals. Video filter, available in 16-pin SOIC package, has triple 6th order filters and combines 2:1 multiplexer on each filter channel with filtering and output drive...

Aerzen USA Process Gas Blower and Compressor Installations Worldwide

Aerzen is firmly established as a global leader in compressed air, gas, and vacuum solutions. Our reputation as an industry leader is built on consistently delivering innovative products that are at the cutting edge of technology. To learn about the industries finest blowers and oil-free and oil-injected screw compressors, see our video.