New Electrical Equipment & Systems Products

Conduction Cooled Switches suit military applications.

Integrated VME Ethernet switch RM940 has eight 10/100 Mbps auto-negotiating ports. Model RM946M 24-port 10/100 BaseTX Ethernet Switch has 2 Gigabit uplinks and Layer 2 switching capabilities. Model RM931/M consists of 16-port, 10/100BaseTX VME switch with 2 Gigabit Ethernet port uplinks. Conduction cooled CP920/12M, 12-port Gigabit switch is designed to CompactPCI form factor. Model CP663FX/3UM,...

Multi-Level Switch Kit handles high-pressure applications.

Series F7-MLK2 contains all components necessary for fabrication of 1 or 2 station level switch for pipe plug mounting. User can customize stem length, actuation point, distance between floats, and lead wire lengths to fit specific application. All components are 316 stainless steel suited for corrosive liquid monitoring. Operating temperature is -40 to 275Ã-

Motor Control IC works with brushless DC motors.

Packaged in compact 64-pin PQFP, model MC73110 consists of intelligent, single-axis controller designed to provide digital current loop, velocity loop, and commutation for motors. It operates in one of 3 modes: internal velocity profile mode, velocity mode with external command signal, and torque mode with external command signal. Unit provides 6-step and sinusoidal commutation, analog/digital...

Sealed Foot Switch suits dirty/oily/wet environments.

Series 400 Sealed Foot Switch features low-profile, cast iron housing with foot rest that lets users slide their foot sideways and step on nickel-plated steel pedal. Equipped with skid-resistant elastomeric base pad and 3 mounting holes, switch has no external springs, measures 7Ã-¼ x 4Ã-¾ x 1Ã-½ in., is UL/CSA listed, and sealed to IP68 and NEMA 4X, 6P, 12, and 13 ratings....

The Ultimate Guide To UV Disinfection Lighting

This white paper provides a guide to UV disinfection lighting and their benefits over alternative disinfection methods.

Managed Ethernet Switch suits punishing environments.

Compact Ethernet EISX(M) Series offers 8 10/100base-T twisted-pair ports and supports SNMP protocol; each port has LED that shows link/activity/data rate by color. In addition to auto-negotiation, half/full-duplex operation, and flow control, product adds VLAN, trunking, QoS, and programmable fault relay. Individual port parameters simplify configuration via console port attached to terminal...

Motor Driver IC comes in thermally enhanced package.

Series A3949SLP and A3949SLB DMOS full-bridge motor driver IC suits DC motor applications. Unit operates with single supply and with output rating of 36 V at 2.8 A. Driver is offered in small outline, 16-lead thermally enhanced TSSOP package measuring 5.0 x 4.4 mm. PHASE and ENABLE input terminals control speed and direction. Low rDS(On) DMOS outputs are combined with internal synchronous...

Aerospace Circuit Breaker weighs only 150 grams.

Model 5140 is suited for 400 Hz, 3-pole applications from 20-50 A. It is temperature compensated, providing consistent trip curve characteristics from -55 to +90Ã-

Lightning Protector offers multi-strike capability.

Model MDS+24-F-F is suited for broadband wireless and satellite applications from 300-2,500 MHz. It utilizes cascaded protection circuit resulting in let-through voltage of 48 Vpk and throughput energy of 1,000 Ã-µJ for 3 kA at 8/20 Ã-µs waveform. Unit provides low insertion loss of 1 dB and RF power of 50 W. Featuring 75 ohm F female connectors, flange mountable lightning protector...

DC/DC Converter offers integrated Schottkys in 3 x 3 mm DFN.

Dual micropower Model LT3463 features internal 250 mA, Ã-

Brushless DC Motor features plastic construction.

At 4 V, low inertia, outer-rotor DC motor draws less than 100 mA at 1,400 rpm. Measuring 1.85 in. diameter by 0.75 in. tall, unit features through-hole design, optional integral drive electronics, and integral encoder option. Low-profile provides space-efficient, direct coupling interface in many applications. Motor is suited for portable or battery-operated polygon scanners as well as diagnostic...

Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life

For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.