Differential Pressure Switch handles up to 2000 psid.
Series A4 Differential Pressure Switch handles media to 6000 PSIG with set-point ranges to 250 psid. Switch mounts in any position and carries light to moderate mechanical shock and vibratory loads. Unit weighs 8.5 oz and has temperature limit of -65 to +225Ã-
Read More »
Synchronous Motors offer speeds to 30,000 rpm.
Designed for operation with bus voltages to 750 V, IndraDyn H kit motors are optimized for high torque and consist of 3-phase-wound stator and permanent-magnet rotor. They combine advantages of synchronous motor technology with operational characteristics of asynchronous motors, providing up to 6,500 Nm torque. Cooling system is enclosed within stator, and motor windings are protected against...
Read More »
DC/DC Converters feature -
Series FSM1S, FSMA1S, and FSM1D are unregulated, 1 W DC/DC converters offering input voltages of 5, 9, 12, 15, and 24 Vdc and output voltages of 3.3, 5, 9, 12, 15 and 24 Vdc. Series FSM1S and FSMA1S are single output, while Series FSM1D is dual output. Units come in SMD package with minimum isolation voltage of 1,000 Vdc, minimum efficiency of 70%, and operating temperature from -40 to +85Ã-
Read More »
High Data Rate Cable Assembly works with ZD connectors.
Able to work with ZD backplane interface, GORE(TM) EYE-OPENERÃ-® ZD Cable Assembly combines digital cable assembly technology with ZD high-speed connector to offer interconnect that handles bandwidths 5 Gb/s and higher. It uses expanded PTFE as dielectric core for digital interconnect cable. Helically wrapped core ensures controlled electrical properties throughout signal path and provides...
Read More »
Selecting the Right Materials for Your Metal Stamping Project
Learn about metals and their characteristics to help you choose the right option for your unique application.
Read More »
Switchmode Transformer suits AC-DC converter applications.
Model SPP-3002 printed circuit mount transformer is designed for use with TNY255 TinySwitch(TM) integrated offline switching power supply chip from Power Integrations, Inc. Other applications include those requiring inputs of 85-265 Vac, 2 dc outputs ranging from 6.0-12.0 Vdc, and 1 dc output ranging from 12-24 Vdc at power of 2.0 W max. Dielectric strength is rated at 4,000 Vrms. Dimensions are...
Read More »
Flyback Controller operates at 250 kHz constant frequency.
Model LTC3806 synchronously drives primary and secondary side MOSFETs. It facilitates cross regulation in multiple output power supplies by keeping MOSFETs ON and outputs coupled for larger fraction of each power conversion cycle. Unit incorporates all timing and control functions, as well as 1 A gate drivers for designing multiple output power supply at up to 60 W. Adjustable soft-start controls...
Read More »
Miniature Pushbuttons come in 1-, 2- and 4-pole versions.
Offered with momentary and alternate circuits, MB2000 series pushbuttons are available in single-, double-, and 4-pole, double throw configurations. They feature over-center actuator mechanism, guide-interlocked actuator blocks, frames clinched above case, and epoxy-sealed terminals. Power rated models are 6A @ 125 Vac and 3A @ 250 Vac or 3A @ 30 Vdc. Logic level devices are rated at 0.4 VA max @...
Read More »
Gigabit Ethernet Switch has Layer 3 support for routing.
Model RM920 is used as high-speed interconnect within server blade chassis or as core switch in fault-tolerant clusters of embedded systems. Management software capabilities include QoS on Layers 2/3 and 802.1p tag, deep packet filtering, Link Aggregation, Spanning Tree, Rapid Spanning Tree Protocol, 802.1Q VLAN standard, Broadcast Storm Control, and Port Mirroring. All ports are routed to front...
Read More »
Level Switches suit powder or fluff applications.
Designed for working with extremely light or fluffy products or bulk solids that tend to pack or bridge easily, DynatrolÃ-® G-Series Level Detectors provide high-, mid-, or low-point level detection. Products are solidly constructed and employ no moving parts. They require no adjustments, calibrations, or maintenance.
Read More »
Uninterruptible Power Supplies have battery backup.
Designed for systems in commercial and military markets, TCP/BBU Series single output power supplies provide seamless DC power in 2U package with separate charging circuit. Sealed lead acid batteries provide up to 1 hr back-up, and low voltage battery disconnect protects batteries from damage due to deep discharge. Standard voltages include 12, 24, and 48 V outputs up to 500 W, and input is rated...
Read More »
Don't Let Your Money Drain Down the Hole...Drill Steel with Euroboor
As a globally recognized manufacturer of industrial grade portable tools, Euroboor is at the forefront of drilling and cutting technology. Our reputation as an industry leader is built on robust products that fit a wide range of industrial cutting and drilling applications. See our video to learn more about all of our quality products.
Read More »
