New Electrical Equipment & Systems Products

High Power Density Front End Module measures 1 RU high.

PFC FrontEnd(TM) provides control and signaling flexibility, supplying AC OK, Power OK, Temp failure warning, and 4 discrete isolated enable/disable lines for block control. Operating from 85-264 Vac input, this fan-cooled, power factor corrected (PFC) AC-DC front end module provides 375 V out with power density greater than 28 W/in.Ã-³ and measures 6.4 x 7 x 1.72 in. It provides power...

Cell Phone Platform adheres to GPRS standard.

Consisting of silicon chips, software, and development kit, TrueNTRY(TM) X122 enables variety of capabilities for entry-level phones, including CD-quality music, camera/camcorder functions, and Internet access. By providing dedicated applications processor separate from communications engine, X122 boosts overall processing speed. Platform supports advanced audio processing including dynamic noise...

Kawasaki Microelectronics Chooses AT&T Global IP Network

Network Will Connect Development Centers in the U.S., Taiwan, and India with Japanese Locations TOKYO, Nov. 21 -- AT&T Inc. (NYSE:T) announced today that Kawasaki Microelectronics, Inc. (K-micro) has chosen AT&T's global Internet Protocol (IP) network to connect the overseas locations of K-micro, a global leading manufacturer of application-specific integrated circuits (ASICs). Live operation...

Vicor V-·I Chip Components Reduce Energy Costs

Increase Efficiency and Power Density Andover, MA, November 13, 2006...Vicor Corporation (NASDAQ: VICR) today announced the availability of a full family of VÃ-·I Chip(TM) components, enabling complete power systems using Factorized Power Architecture (FPA). FPA separates or 'factorizes' regulation and voltage transformation functions into flexible, high-performance building blocks. VÃ-·I...

Rack Systems Done Right: A Hands-On Guide to Reaping Maximum Benefit from Design Review

Learn how to reap the maximum benefit from design review in our whitepaper.

Lincoln Electric Equipment and Welding Wire Used for Freedom Tower

Cleveland - Lincoln Electric customer Banker Steel Co. LLC, a steel fabricator based in Lynchburg, Va., recently began construction on 27 massive columns, which will serve as the foundation for the 1,776-foot-tall Freedom Tower in New York City. Banker Steel is welding six-inch plates to the flanges of the I-beam sections, ranging in size from 30 to 56 feet, to increase the strength of the box...

Power Supplies suit medical applications.

Available in four models, MSM80F series provide 80 W of DC power at single outputs of 9, 12, 15, and 24 V. Offering 9w/in3 power density, open frame power supplies feature Zero Voltage Switching (ZVS), synchronous output rectifiers, wide range AC input, and fully regulated output. Products also have hold-up time greater than 20 ms at 100 Vac and operate over 0-50Ã-

Surface Mount Tact Switch allows for PC board edge mounting.

Specified over -20 to +70-°C operating temperature range, TL3320 right-angle SMT tact switch features RoHS-compliant construction and has contact rating of 12 Vdc, 50 mA. Design allows PCB edge mounting and has rated mechanical life of 80,000 cycles. Markets and applications include consumer electronics, computers and peripherals, instrumentation, and telecommunications.

Snap-In SMT Pushbutton Switch has solid-state design.

Available in momentary or maintained action versions, Series 39-8 snap-in miniature pushbutton switches allow users to apply and process Hall-effect chip and LED (optional) to PCB. User then snaps 39-8 actuator in place manually or robotically, completing totally process-compatible pushbutton switching system. Surface mount (SMT) product is RoHS-compatible and can be LED lighted or non-lighted....

Split-Core Transformers measure AC primary currents.

Self-powered TT series features ferrite core material, with magnetic permeability, insensitive to aging and temperature changes. While TT 50-SD (50 A range) measures 1.43 x 1.69 x 1.24 in. and has .31 in. dia sensing aperture for non-contact measurement, TT 100-SD (100 A range) measures 1.75 x 2.00 x 1.44 in. and has .63 in. dia sensing aperture. Absolute accuracy is better than 1%, linearity is...

Ethernet Switches come in 16, 25, and 32-port models.

Suited for heavy-duty carrier class and industrial applications, 1U 19 in. rack-mount RK Series is configurable with up to 4 slots that accept variety of modules including 10/100 Mbps and 10/100/1000 Mbps copper RJ45 ports; 10, 100, or 1000 Mbps fiber optic ports for distances up to 120 km; and PoE ports. Real-time performance is ensured with RSTP for fast redundant rings, VLANS for virtual...

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.