New Test & Measurement Products

Data Recorders offer modular signal interfacing.

Operating with interchangeable media cartridges, D5000 Series is utilized for PCM telemetry, avionics bus, and sensor data acquisition in non-benign environments. Compact products offer 256 Mbit/s total system data rate and allow users to choose between tape, disk, and solid state drives. They can be configured with up to 75 channels per mainframe and include SCSI and FireWire interfaces, 3...

Telecentric Lens suits metrology and machine vision.

When coupled to 2/3 in. format CCD, 0.08X MVOÃ-® Lens offers 4 in. horizontal field of view. Working distance ranges from 170-220 mm with resolution of more than 45% at 40 line pairs/mm. Telecentricity is less than 0.2Ã-

Digital Panel Meter has sunlight-readable LED display.

Suited for outdoor applications, solid-state Trident Digital Panel Meter features NEMA 4X front with 4-digit, 0.56 in., 7-segment, sunlight-readable LED display that provides 8 levels of brightness for day or night viewing. Unit is calibrated to accept process voltage and current inputs, 100 ohm RTDs, and thermocouples. Universal power supply accepts 85-265 Vac or 90-260 Vdc, and software allows...

Multi-Gas Analyzer measures trace oxygen.

LaserTrace multi-point, multi-species, multi-gas analyzer incorporates oxygen module based on Cavity Ring-Down Spectroscopy technology. Capable of measuring trace oxygen to 500 parts-per-trillion, LaserTrace also detects species such as H2O, O2, CH4, H2, CO, NH3, H2S, and HF. It features plug-and-play operation, is calibration free, and can measure up to 4 sample gases.

Accelerating Composites Production with Dielectric Cure Monitoring

This white paper provides an in-depth explanation of how dielectric monitoring works, and why it's the best choice for any company working with advanced composite materials.

Mechanical Tester test valves without process shutdown.

Stroke-Test operates on principle of valve partial stroke testing, which allows safety system to close valve only partially. When fitted to valve, unit limits movement of actuator to within pre-set travel limits, allowing all valve elements to be tested without fully closing valve. Device is vibration-resistant, corrosion-protected, and independently certified to IP67 to prevent water ingress....

Level-Velocity Logger is powered by D-cell batteries.

Stingray portable logger, suited for area-velocity flow surveys in sewers, open pipes, and channels, uses submerged ultrasonic sensor to measure velocity and level. Electronics are housed in watertight IP67 enclosure and rated for operation from 4-140Ã-

Tachometer takes non-contact measurements to 99,000 rpm.

TraceableÃ-® Laser Beam Tachometer conducts optical, non-contact measurements by locking onto self-adhesive reflective tape on rotating object and counting rotations. Within 2 sec, unit provides answers from 10-99,000 rpm with 5-digit resolution of 0.001, 0.01, 0.1 or 1, depending on displayed revolutions. Accuracy is Ã-

Tester measures tensile strength of crimped joints.

Available in capacities to 200 lb, Wire Crimp Pull Testing System tests pull-off tensile force of crimped joints. It consists of motorized test stand, digital force gauge, and set of gripping fixtures. Motorized system employs adjustable limit switches that allow users to set travel distance limits and manual control knob for fine adjustments. Features include 0.5-13 ipm adjustable speed range;...

Abrasive Wheels allow high-speed operation in die grinders.

T1 Abrasive Wheels feature non-woven cotton fabric with aluminum oxide abrasives that are laminated, pressed, and bonded together with fiberglass reinforcement. They feature 4 grit sizes and are available in 2, 2Ã-½, and 3 in. dia., 1/16, 1/8, and Ã-¼ in. thickness, and 1/4 or 3/8 in. bore. Wheels are rated for 28,000, 24,000, and 20,000 rpm. Options include soft bond for light deburring...

Oxygen Transmitter offers split architecture option.

Available with integral or remote-mounted electronics, Oxymitter(TM) in situ, zirconium oxide-based oxygen transmitter is available with probe lengths from 18 in. to 12 ft. Separation of control unit and analysis section provides remote monitoring and programming capabilities for flue gas measurement. No sampling system required, and product provides configuration and measurement diagnostic data...

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.