Laboratory Traps

Vacuum Pump Inlet Traps Protect Atomic Layer Deposition Tools
Fluid & Gas Flow Equipment

Vacuum Pump Inlet Traps Protect Atomic Layer Deposition Tools

A full line of vacuum pump inlet traps that can be customized by users to protect the vacuum pumps and lines on atomic layer deposition (ALD) tools from particulates and unreacted precursors is available from MV Products of North Billerica, Massachusetts. MV Vacuum Inlet Traps for ALD processes can be easily customized by users to remove all process byproducts from precursors such as TMA, TiCl,...

Read More »
Vacuum Pump Inlet Traps Customized By Users for ALD Processes
Fluid & Gas Flow Equipment

Vacuum Pump Inlet Traps Customized By Users for ALD Processes

A full line of vacuum inlet traps and filter media for protecting vacuum pumps employed in research and production ALD (Atomic Layer Deposition) processes is available from MV Products of North Billerica, Massachusetts. MV Vacuum Inlet Traps for ALD processes range from 4” to 16” dia. with port sizes from NW-25 to ISO-160 for protecting vacuum pumps in applications with vacuum flow rates from...

Read More »
Cart-Mounted Dual Vacuum Inlet Traps facilitate component access.
Fluid & Gas Flow Equipment

Cart-Mounted Dual Vacuum Inlet Traps facilitate component access.

Custom-tailored to process, MV MultiTrap® Duplex Carts include two 16 in. vacuum inlet traps that accommodate various filter cartridges to meet high-flow vacuum deposition process requirements. Design provides up to 160 ft² of filtration surface area and 60 g/ft² particle retention and facilitates access to process components. Carts can be equipped with internally cooled baffles with up to 30...

Read More »
Vacuum Pump Inlet Trap features 80 sq ft of filter media.
Fluid & Gas Flow Equipment

Vacuum Pump Inlet Trap features 80 sq ft of filter media.

Available with NW-40 to ISO-160 ports, MV Multi-Trap® 16 in. Stacked High-Capacity Vacuum Inlet Trap features one large pleated polyester filter element that provides 80 ft² of coverage to capture and retain 60 grams/ft² of particulates. Filter can be supplied with 25- and 100-micron ratings for vacuum processes that generate large amounts of contaminants. Stainless steel housing is offered...

Read More »
Ten Ways to Control Aluminum Costs
Sponsored

Ten Ways to Control Aluminum Costs

All job shops want to save money, and one of the most lucrative ways to do this is by learning how to control the costs of materials such as aluminum. An analysis of your material usage as well as how much you end up scrapping can reveal a goldmine of savings. In this white paper, you will learn ten ways in which you can capitalize on these hidden reserves. From understanding scraps in a more mathematical way to accomplishing jobs with a lean manufacturing approach, this list will provide you with the necessary tools you need to assist you in your financial analysis of your shop’s material consumption. This paper also features real world case studies to illustrate how the right attitude towards material costs can affect real change in terms of money, time, and efficiency.

Read More »
Vacuum Pump Inlet Trap has high-capacity design.
Fluid & Gas Flow Equipment

Vacuum Pump Inlet Trap has high-capacity design.

Suited for protecting vacuum pumps in LPCVD, PECVD, and ALD processes, MV Multi-Trap® features one 14 in. dia x 13 in. high filter made from pleated, high-temperature polyester. Providing 40 ft² surface area, trap can retain 60 g/ft² of particulates. Single filter, available with 25 and 100 micron ratings, fits standard 16 in. dia, all-stainless steel housing with ISO 160 ports offered in...

Read More »

Chip Trappers Are Now CE Compliant
Cleaning Products & Equipment

Chip Trappers Are Now CE Compliant

Independent laboratory tests now certify that EXAIR’s Chip Trapper™ meets the rigorous safety, health, and environmental standards of the European Union that are required to attain the CE mark. Chip Trapper™ offers a fast, easy way to clean large coolant sumps. Chip Trapper removes the solids such as chips, swarf and shavings out of used coolants and other liquids. Coolant that used to last...

Read More »

Microbarb Low-Carryover Connectors from Diba at Pittcon 2011
Electrical Equipment & Systems

Microbarb Low-Carryover Connectors from Diba at Pittcon 2011

Danbury, CT (February 16, 2011) - Custom fluid path specialist Diba will feature its fluid handling components at the 2011 Pittcon Conference and Expo. Diba's Microbarb(TM) connectors, Click-N-Seal Ultra, Bubble Trap and PEEK chromatography columns will also be on display at the company's booth #3026. The show takes place at the Georgia World Conference Center (Atlanta, Ga.) from March 14-17....

Read More »
Inlet Trap collects condensable byproducts of LED manufacturing.
Fluid & Gas Flow Equipment

Inlet Trap collects condensable byproducts of LED manufacturing.

Able to collect up to 3,000 in³ of solids, MV Multi-Trap® vacuum pump inlet trap features knock-down stage with integral 500 in² water-cooled baffle wrapped with 3/8 in. cooling tube to help condense material entering trap. Unit measures 30 in. high x 12 in OD and has ISO 80 port. Water-cooled baffle is 20 in. high x 10 in. OD and surrounds 2 stages of five 9.5 in. filter elements. Filters...

Read More »
Vacuum Inlet Trap protects pumps in deposition processes.
Fluid & Gas Flow Equipment

Vacuum Inlet Trap protects pumps in deposition processes.

Constructed from 304 stainless steel and available with ISO-160 flanges, MV Multi-Trap® 16 in. Vacuum Inlet Trap features knock-down stage, 2 stages of user-selectable filter elements, and cooling coils for removing condensable byproducts and corrosives from deposition process forelines. It is capable of up to 2,500 cu in. of solids accumulation and can be customized with various filter options...

Read More »

All Topics