Level Probes

Level Probes

Condition Monitoring Kit assesses machine health.

By testing bearings, pumps, electric motors, and compressors, CMAK 400-ML Basic Condition Monitoring Kit enables multi-parameter machine assessment. Kit includes SKF Machine Condition Advisor to simultaneously measure machine vibration signals and temperature; external sensor featuring 100 mV/g accelerometer; SKF IR Thermometer serving as dual laser sighted non-contact instrument; and SKF...

Read More »
Pump Protection System is cUL, ATEX, and IECEx approved.
Level Probes

Pump Protection System is cUL, ATEX, and IECEx approved.

Using ultrasonic probe to monitor gas inside process fluid as it passes through sealless magnetic drive pump, VapourView provides early warning of incorrect priming, venting, cavitation, or entrained process gas. Warning signal is sent to process operator when ultrasonic probe detects presence of even minute gas levels- — as low as 1% per volume. Operating from -40 to 356°F, system includes...

Read More »
Level Probes

SuperSonic Imagine Receives FDA 510k Clearance for New Musculoskeletal and Vascular Ultrasound Probes

AIX-EN-PROVENCE, France- — SuperSonic Imagine (Euronext: SSI, FR0010526814), a company specializing in ultrasound medical imaging, is pleased to announce it has received 510k clearance from the FDA for two new probes used with its ultrasound machine, the Aixplorer®. The first of these newly approved devices facilitates musculoskeletal and sports medicine diagnoses. The SHL20-6 probe, a...

Read More »
Level Probe Converters offer panel mount option.
Level Probes

Level Probe Converters offer panel mount option.

Available in deadfront mount versions, Model LPC420 and Model LPC420R with relay outputs enable users to see level information from both front and back. Converters monitor 10 electrodes on Level Probe, and provide analog signal that is proportional to level. Units also provide 10 Relay Outputs with contacts that close as liquid covers respective Level Probe electrodes. Relay Outputs may be used...

Read More »
Phased Array Wheel Probe inspects composite materials.
Level Probes

Phased Array Wheel Probe inspects composite materials.

Replacing full 2-D encoding systems, RollerFORM facilitates immersion-like ultrasonic testing of composites and other smooth-surfaced materials that are used in aerospace industry. Wheel tire is made from material that closely matches acoustic impedance of water, permitting efficient transmission of energy to part without unwanted echoes, and- obtaining 1 mm near-surface resolution in composites...

Read More »
Lake Shore to Discuss THz Spectroscopy, Probing, and Hall Measurement Solutions at EMC
Level Probes

Lake Shore to Discuss THz Spectroscopy, Probing, and Hall Measurement Solutions at EMC

Columbus, Ohio- – Lake Shore Cryotronics, a leading innovator in solutions for measurement over a wide range of temperature and magnetic field conditions, announced today that it will be at next week’s 56 th Electronic Materials Conference (EMC) in Santa Barbara, CA, where it will be spotlighting its non-contact Model 8501 THz system for material characterization. The EMC conference, which...

Read More »
Level Probes

ProbeLogic Unveils New Smart3D Tester for Use with 3D Ultrasound Probes

ProbeLogic has released the Smart3D tester. This tester is the first of its kind in the world and is capable of fully testing and diagnosing mechanical 3D probes. On-board features also include many modes that allow for a much simpler repair process when repairing 3D transducers. “We have been using and testing the Smart3D at our Perth based ultrasound probe repair facility for the last 12...

Read More »
RF Admittance Level Probe works in temperatures to 842
Level Probes

RF Admittance Level Probe works in temperatures to 842

Model AP/APX comes in high temperature and super high temperature designs that can be used where internal vessel temperatures can reach up to 450°F and 842°F, respectively. Available for detecting presence and absence of liquid, slurries, and bulk solids in diverse applications, RF admittance point level sensor includes integral electronics with universal 20–255 Vac/Vdc power supply, DPDT...

Read More »
Level Probes

Oscilloscope Probes measure current or voltage signals.

Designed to fit any Rigol oscilloscope,- current probes RP1003C/RP1004C/RP1005C measure higher speed transient currents up to 100 MHz when used with the RP1000P external power supply. Probes RP1001C/RP1002C enable direct measurements of currents up to 1 MHz or 100 A DC. Respectively intended for 25/50/100 MHz applications, RP1025D/RP1050D/RP1100D are passive, high voltage differential...

Read More »
Capacitive Sensor Ensures Optimum Images for Surgical Microscopes
Level Probes

Capacitive Sensor Ensures Optimum Images for Surgical Microscopes

Surgical procedures require a perfect view of the operating area. Surgeons often use surgical microscopes for support. A high-precision capacitive sensor is used to stabilise the microscope's field of view. The lenses of a surgical microscope are attached to long tripod arms. These enable the surgeon to accurately position the microscope and provide the surgical team with more space to manouvre....

Read More »
Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary
Sponsored

Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary

For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.

Read More »

All Topics