Flowmeters

New AW-Lake TRG Turbine Flow Meters Provide Sturdy Construction for Long-term High Performance
Flowmeters

New AW-Lake TRG Turbine Flow Meters Provide Sturdy Construction for Long-term High Performance

Includes 10:1 turndown range, allows measurement of water flow down to 0.1 gpm and up to 3 gpm with an accuracy more than 0.5%. Features electronic integration to display flow rate, totalization and current or voltage output to compatible electronics. Comprises TRG-11-375 Turbine Meter mounted to an AW-Lake frequency to analog converter that provides 4-20mA output to an existing controller.

Read More »
New InnovaSonic 207i Liquid Ultrasonic Flow Meter Ensures Accuracy of +/-0.5% of Reading from 0.16 to 40 ft/s (0.05 to 12 m/s)
Flowmeters

New InnovaSonic 207i Liquid Ultrasonic Flow Meter Ensures Accuracy of +/-0.5% of Reading from 0.16 to 40 ft/s (0.05 to 12 m/s)

Calculates thermal energy / BTU by determining the amount of heat transferred between the cold and hot flow legs of a heating or cooling process. Ideal solution for thermal energy/BTU metering as well as designed, built and calibrated for non-intrusive liquid flow metering. Used in applications like thermal energy/ BTU measurement, cooling and heating fluid measurement, water & wastewater and...

Read More »
Coriolis Mass Meters from AW-Lake Indicate Low Paint Supplies in Airplane Wing Coating Process in Aviation Manufacturing Facility
Flowmeters

Coriolis Mass Meters from AW-Lake Indicate Low Paint Supplies in Airplane Wing Coating Process in Aviation Manufacturing Facility

Oak Creek, Wisconsin- February 20, 2019- A robotic paint process used by an aviation manufacturing facility to coat airplane wings utilizes TRICOR Coriolis metering technology from AW-LAKE COMPANY to detect the presence of air bubbles in paint supply lines as an early warning of low paint volumes. The automated paint operation includes the application of primer, color coats and topcoat onto the...

Read More »
KROHNE to Manufacture OPTIMASS Twin Bent Tube Coriolis Mass Flowmeter in New Beverly, MA Facility
Flowmeters

KROHNE to Manufacture OPTIMASS Twin Bent Tube Coriolis Mass Flowmeter in New Beverly, MA Facility

Production highlights commitment to manufacturing in the US Beverly, MA: KROHNE, Inc. announces that it has begun manufacturing the OPTIMASS 6400 twin bent tube Coriolis mass flowmeter at its newly opened state of the art flow and level instrument manufacturing and calibration facility located in Beverly, MA. The OPTIMASS 6400 is ideal for standard liquid and gas applications in the chemical and...

Read More »
AW-Lake Offers Mass Flow Meters and Controllers for Marshmallow Flow Monitoring
Flow Controllers

AW-Lake Offers Mass Flow Meters and Controllers for Marshmallow Flow Monitoring

The Thermal Mass Flow Controllers are embedded with Vogtlin MEMS sensor technology that provides an accuracy of 0.5% and offer maximum flow rate value of  70 NLPM. The TRICOR Coriolis flow meters measure marshmallow viscosity at approximately 0.3 to 0.4% accuracy for each cycle. The meters feature 4-20mA output that is used for controlling the production line via programmable logic controller.

Read More »
New TCM 0650 TRICOR Coriolis Mass Flow Meters Come with EPA-Reporting Software
Flowmeters

New TCM 0650 TRICOR Coriolis Mass Flow Meters Come with EPA-Reporting Software

The TCM 0650 TRICOR Coriolis Mass Flow Meters are designed to accurately track, calculate and report VOC emissions using customized logic controllers. The devices convert paint mass flow into volumetric flow at a rate of 100 – 500 cu-cm/per minute. The meters can be daisy chained by EtherNet cables to a factory Intranet that helps third-party software to use EPA formulas for calculating daily...

Read More »
New Mass Stream D-6390 Flow Meter Comes in IP 65 Rated Electronic Casing
Flowmeters

New Mass Stream D-6390 Flow Meter Comes in IP 65 Rated Electronic Casing

The Mass Stream™ D-6390 Flow Meter provides a maximum measurement range up to 10,000 ln/min air. It comes with Analogue I/O signals, RS232 interface, DeviceNet™, PROFIBUS DP, Modbus or FLOW-BUS protocols. The unit is suitable for use in gas consumption measurements, aeration and purging processes or natural gas/biogas applications. The meter is offered with an optional multifunctional display.

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics