Electrical Indicators

6300T series 3mm Right Angle SMD Circuit Board Indicator feature diffused round domes lens.
Electrical Indicators

6300T series 3mm Right Angle SMD Circuit Board Indicator feature diffused round domes lens.

Housed in MSL3 moisture sensitive package, 6300T series 3mm right angle SMD circuit board indicator is designed for low to high volume manufacturing. Featuring diffused round domes lens with 2.85mm bulb that gives a 50-degree viewing angle, indicator is used in automation & control, food service, industrial and telecommunications. Providing an illuminated indication, and placed in a black UL...

Read More »
Electrical Indicators

Sentient Energy and Landis+Gyr Announce 'Plug-and-Play' Capability for S610 Line Sensors Deployed on Landis+Gyr's Distribution Automation Network

New capability significantly improves deployment efficiency of intelligent fault sensors BURLINGAME, Calif. and ATLANTA - Sentient Energy, Inc. and Landis+Gyr announced a new automated provisioning capability for Landis+Gyr's S610 Line Sensor. As a result, this intelligent fault circuit indicator, developed by Sentient Energy, can now be deployed as a plug-and-play network component in...

Read More »
Shaft Grounding Products deliver reliable bearing protection.
Electrical Indicators

Shaft Grounding Products deliver reliable bearing protection.

Protecting against electrical discharge machining (EDM), Smart Shaft Grounding combines Current Diverter Ring® technology and other features. Providing voltages withÂ- low impedance path to ground away from bearings while monitoring grounding effectiveness increases motor reliability. Products – Smart™ CDR®, Smart™ MGS®, and Smart Ground Monitor™ –provide...

Read More »
Wireless DC Clamps save, share measurements directly from field.
Electrical Indicators

Wireless DC Clamps save, share measurements directly from field.

With 64 mm jaw size, a3003Â- clamps around large, high current conductors and measures up to 2,000 A DC. Fostering accurate measurements without interrupting workflow, a3004 measures 4–20 mA signals without breaking loop and features detachable clamp with extension cable for measurements in tight locations. Both instruments record and store up to 65,000 measurements with...

Read More »
Electrical Indicators

Intelligent Fault Circuit Indicator supports grid management.

Extending distribution monitoring capabilities of Gridstream® RF network, S610 Line Sensor delivers fault location and accurate load logging from any point on distribution network. Device also serves as power harvesting sensor that generates necessary power from current flowing in distribution line, simplifying installation. In addition to sensing current, conductor temperature, and voltage...

Read More »
Heat Tracing Accessory visually indicates energized circuit.
Electrical Indicators

Heat Tracing Accessory visually indicates energized circuit.

Designed for use in energy and commercial building and construction markets, UESL End Seal Signal Light Kit provides visual indication that heat trace circuit is energized. NEMA 4X rated end seal terminates one cable and indicates power with universal voltage LED indicator light. Offering 360° visibility, design accelerates and facilitates installation with self-regulating and constant...

Read More »
Circuit Breaker Finder performs multiple functions.
Electrical Indicators

Circuit Breaker Finder performs multiple functions.

Comprising transmitter and receiver, BF20 Circuit Breaker Finder with NCV Detector and GFCI Outlet Checker determines circuit breaker or fuse associated with any 110 V outlet without interrupting power. Fully automatic unit also detects energized lines, cables, and outlets; tests for and identifies common outlet wiring faults; and verifies operation of GFCI circuits. Designed to comply with...

Read More »
Static Grounding Relay helps control ignition risk.
Electrical Indicators

Static Grounding Relay helps control ignition risk.

Featuring HAZLOC-approved, Intrinsically Safe-certified circuit, Earth-Rite® OMEGA II monitors resistance of circuits designed to ground equipment subject to electrostatic charging. Adjustable resistance monitoring settings of 2, 4, 10, and 600 Ω accommodate requirements of diverse applications. While 2-pole FM-approved static grounding clamps and Cen-Stat™ grounding cable connect relay...

Read More »
Electrical Indicators

Charge Plate Analyzer offers one-button operation.

Featuring high-contrast LED display, Model 300 is used for checking effectiveness of bench-top, room, and overhead ionization-type static control systems and demonstrating charge presence. It measures, displays, and stores test data, including discharge times, peak offset voltages, and average offset voltage. Single-button operation supports manual +decay, -decay, and balance tests or automated...

Read More »
Electrical Indicators

Power Amplifier features slew rate greater than 900 V/µs.

Featuring all-solid-state design, Model 10/40A-HS provides output voltage of 0 to ±10 KVdc or peak AC with output current of 0 to ±40 mAdc or ±120 mA peak AC for 1 ms. Signal bandwidth ranges fromÂ- DC to greater than 23 kHz. Four-quadrant, active output stage sinks or sources current into reactive or resistive loads throughout output voltage range. Configured as...

Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.

Read More »

All Topics