LCR Meters

LCR Meters

LCR Meter troubleshoots small SMT components.

Integrating digital LCR-meter with tweezer probes, Smart Tweezers provide inductance, capacitance, and resistance measurements for testing and troubleshooting SMT components. With touch of tweezer tips to component, handheld unit automatically delivers measurements withÂ- basic accuracy of 0.2%. Additional functions include onboard impedance testing, diode and continuity tests, and component...

Read More »
LCR Meters

Handheld Meters assess electronic, process control devices.

Used on bench or in field, U1701A capacitance meter and U1731A/U1732A LCR (inductance, capacitance, resistance) meters let engineers perform one-touch measurements, test tolerance, and record values. Two-in-one functionality of U1401A calibrator/meter lets engineers characterize process-control devices while on-the-go. Suited for validation, troubleshooting, or maintenance, it offers simultaneous...

Read More »
LCR Meter operates at speed of 5.6 ms at 1 MHz.
LCR Meters

LCR Meter operates at speed of 5.6 ms at 1 MHz.

Providing 0.05% basic accuracy from 20 Hz to 2 MHz, Model E4980A supports LAN, USB, and GPIB as well as 20 Vrms test signal, facilitating management of multiple instrument setups. Unit features support for 40 Adc bias current source for conducting dc current-biased inductance measurements, dc resistance/voltage/current measurement readout for performing simultaneous evaluations, and 10 Vdc source...

Read More »
LCR/ESR Meter tests components at up to 200 kHz.
LCR Meters

LCR/ESR Meter tests components at up to 200 kHz.

Synthesized Bench In-Circuit LCR/ESR Meter, Model 889A, utilizes standard 115 Vac outlet as power source to test components with basic accuracy of 0.1%. It provides dc/ac voltage and current measurements as well as diode/audible continuity checks. Utilizing front panel-mounted BNC connectors and test leads, user can test variety of components such as inductors, capacitors, and resistors. Dual...

Read More »
LCR Meter offers accuracies better than 0.3%.
LCR Meters

LCR Meter offers accuracies better than 0.3%.

Model Z-8200 offers 100 Hz, 120 Hz, and 1 kHz test frequencies and has built-in comparator with 4-bin sorting capability. With series and parallel equivalent circuit modes, it also provides auto ranging with data hold, includes open and short circuit calibration, and pass/fail binning alarm. Measurement ranges include 1 mohm to 999.99 Mohm for resistance/impedance, 1 Â-µH to 999.99 H for...

Read More »
LCR Meter suits automated impedance testing.
LCR Meters

LCR Meter suits automated impedance testing.

Model 3550 measures within frequency range of 42 Hz to 5 MHz with measurement speed of 18 mS and accuracy of 0.10%. It offers 16 ac measurement parameters, 4,500 programmable frequency points, and built-in comparator with 10-bin capability. Additional features include 3 LED displays, RS-232C, and I/O connectors. Meter is suited for traditional component testing, materials characterization,...

Read More »
LCR Meters

LCR Meter measures 8 x 4 x 7 in. and weighs 5-½ lb.

Model 3525 general-purpose programmable LCR Meter suits impedance parameter testing. Flexible design allows testing of capacitors, inductors, coils, resistors, materials, thermoelectric cooling devices, and piezoelectric sensors. Accuracy of 0.08% and measurement speed of 15 mS is provided. It also features 99 storable panel settings, dual 4Â-½ digit LED display, voltage and current monitors,...

Read More »
Auto-Ranging LCR Meter has RS232 interface.
LCR Meters

Auto-Ranging LCR Meter has RS232 interface.

Powered by 9 Vdc battery, handheld dual-display Model 879 measures capacitance, resistance, and inductance in 100 Hz, 120 Hz, 1 KHz, and 10 KHz test frequency ranges. Full 4Â-½ digit, backlit LCD reads values to 19,999 on each range. Unit provides simultaneous display of measured value and Q or dissipation factor. Microprocessor-controlled meter offers min/max average, relative mode, and...

Read More »
LCR/ESR Meter tests components at high speeds.
LCR Meters

LCR/ESR Meter tests components at high speeds.

Model 889 Synthesized Bench In-Circuit meter can be used to test inductors, capacitors, and resistors. It makes ac and dc voltage measurements, diode continuity checks, and LCR and ESR measurements at frequencies up to 100 kHz, with basic accuracy of 0.5%. When LCR measurement mode is selected, test frequencies of 100 Hz, 120 Hz, 1 kHz, 10 kHz, or 100 kHz may be selected on all applicable ranges....

Read More »
LCR Meter measures inductance, capacitance, and resistance.
LCR Meters

LCR Meter measures inductance, capacitance, and resistance.

Passive Component Model 380193 LCR meter measures inductance from 2000.0 microH to 10,000 H, capacitance from 2000.0 pF to 10.000 mF with 0.7% accuracy, and resistance from 20.000 ohms to 10.000 Mohms with 0.5% accuracy. It has RS-232 interface, 4Â-½ digit backlit LCD, test frequencies of 120 Hz and 1 kHz, Hi/Lo limits, and selectable parallel or series equivalent circuit. Optional...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics