Test & Measurement

Tenney Environmental Ships Vacuum Temperature Cycling Chamber to Aerospace Industry
Environmental Chambers

Tenney Environmental Ships Vacuum Temperature Cycling Chamber to Aerospace Industry

New Columbia, PA – January 17, 2018: Tenney Environmental announced the shipment of a Reach-In Vacuum Temperature Cycling Chamber to the aerospace industry. The temperature cycling chamber will be used for temperature altitude testing of aircraft collision avoidance radars. The operating temperature range of this vacuum chamber is -70°C to 177°C with temperature control of +/- 1°C. and the...

Read More »
Rinco Ultrasonics to Introduce AGM Pro Ultrasonic Generator for Automated Welding at NPE2018
Ultrasonic Generators

Rinco Ultrasonics to Introduce AGM Pro Ultrasonic Generator for Automated Welding at NPE2018

DANBURY, Conn., January 25, 2018 – Rinco Ultrasonics USA, a leading manufacturer of ultrasonic welding equipment, will launch its new AGM Pro ultrasonic generator at NPE2018 May 7-11 at the Orlando County Convention Center in Orlando, Fla. (Booth #W5373). The new ultrasonic generator is designed to be built into automation lines and special- purpose machines for controlling ultrasonic...

Read More »
Series 9200 PetroAlert Gas Analyzer comes with dual-flame ionization detectors.
Gas / Chemical Analyzers

Series 9200 PetroAlert Gas Analyzer comes with dual-flame ionization detectors.

Series 9200 PetroAlert Gas Analyzer is used for both gas chromatography and total hydrocarbon analysis. Units GC detector performs C1 to C5 analysis with detection limit of < 10 ppm as methane whereas THA detector monitors total hydrocarbons down to 0.003% and up to 100% as methane. Analyzer comes with programmable touchscreen and automatic calibration feature. Unit allows remote accessibility...

Read More »
SFM4200 Digital Mass Flow Meter features digital two-wire I²C interface.
Flowmeters

SFM4200 Digital Mass Flow Meter features digital two-wire I²C interface.

SFM4200 Digital Mass Flow Meter is used for measuring air, oxygen and other non-corrosive gases. Unit provides a signal processing time of 0.5 ms can be operated up to 8 bar pressure. Meter is equipped with thermal sensor element for improved signal processing time and bidirectional measurement. Product is suitable for oxygen gas mixing in respiratory applications. SFM4200 are based on CMOSens®...

Read More »
Shaft Couplings Buying Guide
Sponsored

Shaft Couplings Buying Guide

Beam, bellows, chain, jaw, diaphragm, disc, gear, grid, Oldham, Schmidt, clamping-all styles of shaft couplings. With so many varieties, how are you supposed to choose the right coupling for your rotating shafts? Which one is going to give you the greatest connection and best absorb misalignments? This extensive buying guide will outline all of the above styles of coupling and advise you which one is best for every industry and application. Once you’re confident enough to make the correct shaft coupling purchase, you’ll also have a trusted list of suppliers to buy from.

Read More »
MetaVue VS3200 Imaging Spectrometer comes with an adjustable stand.
Spectrometers

MetaVue VS3200 Imaging Spectrometer comes with an adjustable stand.

MetaVue VS3200 Non-Contact Imaging Spectrometer suitable for lab or quality control operations. Unit comes with adjustable aperture size, ranging from 2 to 12 mm, three inches above a table with replaceable trays and benchtop stand. Product features on-board camera that offers measurement of vinyl, carpet or fabrics. Unit is embedded with X-Rite Color iMatch and Color iQC software and can store...

Read More »
HDC Straight Shank Holder features slim nose design.
Tool Holders

HDC Straight Shank Holder features slim nose design.

HDC Straight Shank Holder is suitable for high precision machining in automotive, aerospace, medical, and die, mold and 5-axis tool holding requirements. Units use one hex key wrench for loosening or clamping the cutting tool. Holder offers TIR of 0.00012 in. at five times diameter and come with optional straight collets.

Read More »
MF Series Magnetic Filter Holders can withstand autoclaving.
Filter Holders

MF Series Magnetic Filter Holders can withstand autoclaving.

MF Series Magnetic Filter Holders are constructed from Polyethersulfone (PES) material. Units feature built-in membrane guide and bevel designs for easy position and retrieval of filters. Holders use magnetic coupling between funnel and base that allows single handed operation. Units are suitable for volume measurement of both 300 ml and 500 ml funnels graduated in 50 mL increments in range of...

Read More »
Ophir® Focal Spot Analyzer is embedded with BeamGage® beam profiling software.
Analyzers

Ophir® Focal Spot Analyzer is embedded with BeamGage® beam profiling software.

Ophir® Focal Spot Analyzer is designed for measuring focus spot and power of high power lasers. Unit is equipped with SP928 CCD beam profiling camera and LBS-300s beam attenuator system having two beam splitters that are used for polarization-neutral attenuation. LBS-300s enables user to control and adjust output power. Analyzer can measure focal spot size down to 35µm and laser power from less...

Read More »
Fixturlaser ECO Shaft Alignment System comes with 4 in. color screen.
Aligners

Fixturlaser ECO Shaft Alignment System comes with 4 in. color screen.

Fixturlaser ECO Laser Shaft Alignment System is designed for making horizontal machinery alignments. The system is embedded with Verti-Zontal Compound Move® and Softcheck™ firmware. System comes with slim form factor and an adaptive user interface. Verti-Zontal does not require re-measurements between vertical and horizontal adjustments. Unit’s built-in Bluetooth is connected with dual...

Read More »
Tekna Manufacturing LLC Announces Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industrys premier HBOT system. To learn more, see our video.

Read More »

All Topics