Test & Measurement

DVEO's Demodulator-Receiver and Decoder is Designed for Content Monitoring and Repurposing
Decoders

DVEO's Demodulator-Receiver and Decoder is Designed for Content Monitoring and Repurposing

TLV500E-ATSC 3.0™ Demodulator-Receiver and Decoder comes with one BNC connector and supports 576i/480i, 576p/480p, 720p and 1080i/1080p resolutions. This unit converts HD input to SD out and provides 12G/12G/1.5G/1.5G or Quad 3G and HDMI 2.0 4K/60P outputs. The TLV500E-ATSC 3.0 comes with front panel controls, remote management software and upgradeable firmware. The unit features five slots...

Read More »
Amsler Leak Tester Detects Neck Ovality Issues
Testers

Amsler Leak Tester Detects Neck Ovality Issues

Amsler Leak Tester used for inspecting bottle sizes from 10ml to 20 liters at a rate up to 18,000 bottles/hr and hole sizes as small as 0.006 in. Tester is equipped with locking castor wheels, dual guide rails, and powder-coated frame. Tester comes with graphical display, automated self-test feature and optional color deviation, batch counting and fallen bottle detection. Unit is operated on...

Read More »
CGM 750 Cone Mill Uses Vacuum Conveying System for Feeding
Mills

CGM 750 Cone Mill Uses Vacuum Conveying System for Feeding

Kason’s 750 mm diameter CGM 750 Cone Mill is designed for grinding fatty, heat sensitive, sticky, moist or fragile materials. Unit delivers particle size distribution from 125 to 250 microns and features swing-down conical discharge chute for lowering 250 lb cone housing. This mill is constructed of 304 or 316 stainless steel with fully interlocked moving components with time-delay function....

Read More »
EddyNCDT 3060 Inductive Measurement System Measures Ferro- and Non-Ferromagnetic Objects
Measuring Equipment

EddyNCDT 3060 Inductive Measurement System Measures Ferro- and Non-Ferromagnetic Objects

EddyNCDT 3060 has over 400 compatible sensor models, comes with industrial-grade M12 Ethernet interface for fieldbus connection, and ensures fast, high precision displacement measurements. Coupled with the DT3061 controller, it provides 5-point calibration, setting of switching and temperature outputs, and storage of multiple characteristic curves. Other features include high accuracy, bandwidth,...

Read More »
How to Choose the Right Adhesive Tape for Your Application
Sponsored

How to Choose the Right Adhesive Tape for Your Application

With a considerable number of adhesive materials, applications and methods, there are many options to consider when choosing an adhesive tape. As NADCO® is a leading manufacturer of custom tapes and labels; we took our years of experience to create this handy selection guide on choosing the right adhesive tape for your application.

Read More »
Sierra's Flow Meters Provide Solution for Industrial Facilities of All Sizes
Flowmeters

Sierra's Flow Meters Provide Solution for Industrial Facilities of All Sizes

207i Transit-Time Ultrasonic Flow Meters include QuadraTherm 640i/780i thermal, InnovaMass 240i/241i vortex and InnovaSonic 207i ultrasonic flow meters. These units are designed for measuring flows like compressed air, natural gas, steam, and hot and chilled water. The meters are calibrated and built using Big-3TM share firmware. QuadraTherm iSeries and InnovaSonic series meters provide an...

Read More »
Sierra Offers Flow Meters to Comply with EPA Boiler MACT Regulations
Flowmeters

Sierra Offers Flow Meters to Comply with EPA Boiler MACT Regulations

Efficiently Tune Boilers in Refineries, Chemical and Large Manufacturing Plants and Facilities Monterey, CA – Sierra offers a complete suite of Boiler MACT compliant thermal, vortex, and ultrasonic flow meters to meet EPA’s Boiler MACT regulations which are designed to limit hazardous air pollutants (HAP) from commercial and industrial boilers and process heaters. With these Boiler MACT...

Read More »
New Liquid Ultrasonic Flowmeter has Apps and is Optimized for Thermal Energy/BTU Measurement
Flowmeters

New Liquid Ultrasonic Flowmeter has Apps and is Optimized for Thermal Energy/BTU Measurement

Monterey, California - Sierra Instruments is proud to introduce its new InnovaSonic® 207i transit-time ultrasonic liquid flow meter with thermal energy/BTU capability for superior flow measurement.  Designed, built and calibrated by Sierra in Monterey, California, for non-intrusive liquid flow metering, and optimized for thermal energy/BTU measurement, the 207i transit-time ultrasonic...

Read More »
E4500 Industrial Emissions Analyzer Features Storage of up to 2,000 Tests
Gas / Chemical Analyzers

E4500 Industrial Emissions Analyzer Features Storage of up to 2,000 Tests

E4500 NOx Industrial Emissions Analyzer is available with NO and NO2 Sensors. Unit comes with dilution pump for CO measurements and built-in printer. This analyzer offers NOx measurements with 0.1 ppm and analyzer can be used for measuring temperature and pressure. Unit is designed for monitoring emission of boilers, burners, engines, furnaces, turbines, kilns and incinerators. E4500 features...

Read More »
SonoDur2 Hardness Tester Uses Manual and Motorized Probes
Testers

SonoDur2 Hardness Tester Uses Manual and Motorized Probes

SonoDur2 Hardness Tester with data logger features automatic software updates, data logging in line with current Windows software and probes that offer test between 1N to 100N forces. Unit provides user with a TFT color-display for setting and displaying averages, history and tolerance thresholds. This tester is offered with 4GB memory, replaceable charger and PC SonoLink software. Tester is used...

Read More »
Sponsored

Simple Connection MGB with EtherNet/IP

The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.

Read More »

All Topics