Test & Measurement

ZEISS Introduces MICURA with VAST XT Gold or VAST XTR Gold Active Scanning Sensor
CMM Machinery

ZEISS Introduces MICURA with VAST XT Gold or VAST XTR Gold Active Scanning Sensor

ZEISS’ launches MICURA for measuring small or intricate parts with active scanning and submicron accuracy. The system is efficient to handle large parts with 40 percent of 500 x 700 x 500 millimeters measuring range with a machine-mounted controller. The product offers user-friendly CALYPSO metrology software which works with all ZEISS systems. The unit comes with VAST XT gold sensor that...

Read More »
New Dragonfly Inspection and Metrology System from Rudolph Comes with Clearfind Technology
Inspection Equipment

New Dragonfly Inspection and Metrology System from Rudolph Comes with Clearfind Technology

The Dragonfly™ G2 Inspection and Metrology System is offered with multiple sensor options and benefits of the Firefly™ system. This system enables packaging customers to meet the wafer-based application challenges. The unit is embedded with proprietary camera technology and supports Truebump™ Technology for non-visual residue detection. It comes with streamlined software algorithms for...

Read More »
HARVI Ultra 8X Milling Cutter from Kennametal Features a Unique BTF46 Connection
Mills

HARVI Ultra 8X Milling Cutter from Kennametal Features a Unique BTF46 Connection

The HARVI™ Ultra 8X Milling Cutter is used for removing 20 cubic in. of Ti-6Al-4V per minute with 60 minutes of tool life for each cutting edge. The unit comes with double-sided positive rake insert that reduces the power consumption by 50 percent and lowers the cost per edge. It is constructed of high quality steel with BTF46 connection that provides maximum resistance to deflection.

Read More »
Klein Presents Voltage Tester and Fork Meter for Measuring Common Electrical Parameters
Testers

Klein Presents Voltage Tester and Fork Meter for Measuring Common Electrical Parameters

The Dual-Range Non-Contact Voltage Tester with Laser Pointer is designed for determining AC voltage in cables, cords, circuit breakers, switches and outlets. It detects AC voltages from 12 to 1000 V or 70 to 1000 V AC and comes with screw-thread battery cap and 3 m drop protection. The 200 A AC Open Jaw Fork Meter is used for measuring AC current up to 200 A in cables up to 3/0 sizes, voltage...

Read More »
Latest Metrology Gages from Adcole are Equipped with Accurate Headstock Spindle
Gages

Latest Metrology Gages from Adcole are Equipped with Accurate Headstock Spindle

Adcole’s Model 911 and Model 1200LX Metrology Gages are now fitted with LightSCOPE™ and LightSCAN™ optical measurement systems for high speed scanning of complex camshaft and crankshaft parts. The units can be programmable for automated measurement sequences and come with an intuitive interface touchscreen monitor. The gages offer 3,600 data points per revolution. The Model 911 is suitable...

Read More »
Latest Maxim Battery Fuel-Gauges are Embedded with ModelGauge m5 EZ Algorithm
Gages

Latest Maxim Battery Fuel-Gauges are Embedded with ModelGauge m5 EZ Algorithm

Maxim Battery Fuel-Gauges consist of MAX17262 (1.5 mm × 1.5 mm) and MAX17263 (3 mm × 3 mm) models with a quiescent current of 5.2μA and 8.2μA respectively. The MAX17263 unit comes with 3-to-12 LEDs that indicate battery or system status and the integrated pushbutton LED controller reduces battery drain. The MAX17262 gauge can measure up to 3.1 A and is suitable for batteries of 100mAhr to...

Read More »
DeVilbiss Launches DGi Pro Pod Digital Gauge with Smooth Control Knob
Gages

DeVilbiss Launches DGi Pro Pod Digital Gauge with Smooth Control Knob

The DGi Pro Pod digital Air Pressure Gauge comes with digital display that shows read-outs accurate to 0.7 psi. The unit is offered with a kit consisting of an air flow adjustment cheater valve, a DPC-31 DeKups® Adapter, a 7mm Allen Wrench and a spare valve seal. It automatically turns on when spray gun is triggered and meets ATEX standards. The unit’s gauge place in-line at eye-level allows...

Read More »
FCI Launches ST75 Gas Flow Meter with Solid-State Thermal Dispersion Mass Flow Sensing Element
Flowmeters

FCI Launches ST75 Gas Flow Meter with Solid-State Thermal Dispersion Mass Flow Sensing Element

The ST75 Gas Flow Meter is designed for measuring gas or gas mixture. The unit can be calibrated to measure over a flow range from 0.04 to 559 SCFM. It offers a dependable accuracy to ±1% of reading with ±0.5% repeatability in line sizes ranging from 6 to 51 mm. The flow meter can be operated in 0 to 250°F process temperature range and pressures up to 240 psig. The ST75 meter is offered with...

Read More »
New Total Organic Carbon Analyzer Uses UV Persulfate Oxidation Method
Gas / Chemical Analyzers

New Total Organic Carbon Analyzer Uses UV Persulfate Oxidation Method

The Total Organic Carbon Analyzer detects generated carbon dioxide using highly stable NDIR detector for analysis. It is housed in dual compartment enclosure that is rated to IP54 and NEMA 3 standards. The unit features intuitive touchscreen display that shows output/input data, status information, alarms and fault conditions. The analyzer is suitable for applications such as drinking water, feed...

Read More »
New Gel Timer DV2T Viscometer Features a Magnetic Compression-Fit Coupling
Viscometers

New Gel Timer DV2T Viscometer Features a Magnetic Compression-Fit Coupling

The Gel Timer DV2T Viscometer from AMETEK is designed for measuring gel time and the equivalent viscosity value. The unit comes with integrated probes that offer peak exotherm data in °C or °F. It offers continuous torque sensing capability with live display of real time data used in the QC to measure gel coats, resins and potting compounds. It is embedded with time-to-torque program that is...

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics