Test & Measurement

New StructureScan Mini LT Inspection System Offers Real Time Determination of Concrete Slab Thickness
Inspection Equipment

New StructureScan Mini LT Inspection System Offers Real Time Determination of Concrete Slab Thickness

GSSI’s StructureScan™ Mini LT GPR Concrete Inspection System is designed for locating rebar, conduits, post-tension cables, and voids. System consists of a 1.6 GHz antenna, positioning system and control unit. Featuring high-resolution 5.7 in. full color display, ergonomic handle, positioning lasers and 4-wheel drive, the unit is designed to IP 65 standards and comes with real-time migrated...

Read More »
New Micro OPM Unit is Compatible with Both Single- and Multi-Mode Networks
Meters

New Micro OPM Unit is Compatible with Both Single- and Multi-Mode Networks

Greenlee Communications offers Micro OPM Unit, the combination of Micro Optical Power Meter and Visual Fault Locator. The unit is used for troubleshooting FTTx and Point to Point networks. OPM is equipped with InGaAs detector that is calibrated at wavelengths from 850nm to 1625nm to measure optical power and insertion loss. Unit is offered in standard Telco (+6 to -70dBm) and MSO (+26 to -50dBm)...

Read More »
New Short-Open-Load-Through Calibration Kits are Compact and Lightweight
Calibrators

New Short-Open-Load-Through Calibration Kits are Compact and Lightweight

New 4-in-1 Short-Open-Load-Through Calibration Kits are available in PE5CK1013 and PE5CK1012 two models. Units come with gold-plated 3.5 mm connectors and a handy lanyard. Products have a calibration capability of 26.5 GHz. The SOLT kits are designed for field testing, antenna measurement and cable verification applications. Units feature an impedance level of 50Ω, phase deviation of ±2...

Read More »
New Optical ODC2520-46(090) Micrometer Features 90 degree Rotatable Receiver
Micrometers

New Optical ODC2520-46(090) Micrometer Features 90 degree Rotatable Receiver

Optical ODC2520-46(090) Micrometer is designed for measuring diameters, gaps and segments in restricted areas. Unit offers distance-independent measurements, multi-results output and measurement of up to 8 segments. The micrometer provides maximum measuring range of 46 mm and can be set up and configured using user-friendly web interface. Unit can perform measurement distance of up to two meters.

Read More »
Seco Offers New Milling Tools to Optimize Manufacturing Processes
Drill Bits

Seco Offers New Milling Tools to Optimize Manufacturing Processes

Seco New Tools include Double QuattroMill™ 22 face milling tools, Perfomax™ indexable insert drills, Feedmax -P drill and MZN and MBZ high feed milling cutters. Perfomax insert drills are offered in diameters ranging from 15 mm to 59 mm with length-to-length ratio of 2xD, 3xD, 4xD and 5xD. The drills feature a hardness of HRC 60. Solid Carbide Feedmax-P drills come with advanced TiAlN...

Read More »
FDA Clears CASMED's Fore-Sight Tissue Oximetry OEM Module
Oximeters

FDA Clears CASMED's Fore-Sight Tissue Oximetry OEM Module

Filing for first OEM Module combination product expected by year-end 2018 BRANFORD, Conn., May 16, 2018 (GLOBE NEWSWIRE) -- CAS Medical Systems, Inc. (NASDAQ:CASM) (CASMED), a leader in medical products for non-invasive patient monitoring of tissue oxygenation, announces receipt of 510(k) clearance from the U.S. Food and Drug Administration (FDA) for its FORE-SIGHT® Tissue Oximetry OEM Module,...

Read More »
Latest MC275/MC075 Ceramic Milling Cutters Enable Shorter Machining Times
Mills

Latest MC275/MC075 Ceramic Milling Cutters Enable Shorter Machining Times

Walter’s MC275/MC075 Ceramic Milling Cutters are designed to work on nickel-based alloys Inconel 718, synchronous milling, lateral milling, ramping, helical milling, and plunging operations. Units are available with 8–25 mm and a corner radius of 1–1.5 mm. These cutters increase productivity, cutting speeds and metal removal rate. Made from the combination of carbide and ceramic, units...

Read More »
New ISO-Spector M1A AOI System Comes with Multiple Moire Fringe Projections
Inspection Equipment

New ISO-Spector M1A AOI System Comes with Multiple Moire Fringe Projections

ISO-Spector M1A AOI System features field of view of 69 x 69 mm with 25 mega pixel camera. Unit’s Moiré fringe projections provide shadow free measurement of heights up to 25 mm. The system is equipped with 4 fully programmable side view cameras for inspecting J-leads. Unit with industrial grade computer reduces cycle times during the detection of foreign material across PCB. Unit’s...

Read More »
Visual Communications Company Expands Its Product Offering with the Release of Two LED Panel Mount Indicator Series
Indicators

Visual Communications Company Expands Its Product Offering with the Release of Two LED Panel Mount Indicator Series

90 Series and P80 Series provide countless opportunities for distributors and their customers SAN DIEGO, CA (May 7, 2018)— Visual Communications Company (VCC), the global leader in illuminated components is making two LED series available for its distribution channels, effective May 2018. The 90 Series and P80 Series are not new product launches, but rather proven indicators that are now part...

Read More »
New FlashLink In-Transit RTL Mini Logger from DeltaTrak Offers Remote Accessibility via Web Browser
Data Loggers

New FlashLink In-Transit RTL Mini Logger from DeltaTrak Offers Remote Accessibility via Web Browser

FlashLink In-Transit RTL Mini Logger is available in two models with 15-day logging duration and 60-day logging duration. Unit offers information of temperature, humidity and location with the use of GSM cellular technology. The logger allows user to upload documentation such as purchase orders or photos of shipment using ColdTrak web portal. The information from the logger can be accessed from...

Read More »
Neagle Choice, LLC Announces New Available Services
Sponsored

Neagle Choice, LLC Announces New Available Services

Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.

Read More »

All Topics