New Portable Tools Products

TIG Torch facilitates high frequency shielding.

Water-cooled, Crafter Series(TM) 310 A Model CS310 features D-Handle(TM) design with self-indexing flat top that allows operator to orient torch by feel. ColorSmart(TM) color-coded hose sets help welding operators identify input water, return water/power cable, and gas. Reinforced rubber cable assembly offers flexibility in cold weather. Available with 12.5 and 25 ft cables, torch comes...

Tool performs cutting, stripping, and crimping.

Designed for preparing wire ends, stripaxÃ-® plus 2.5 works with wire cross sections from 20-14 AWG. Complying with DIN 46228 P4 requirements, crimping ferrules are stored in tool and inserted automatically in strips of 50. Crimping cylinder can be positioned using adjusting wheel, which audibly snaps into place, preventing errors in positioning and protecting tool from damage. Tensioning...

Pin and Sleeve Devices conform to IEC 309 standards.

Watertight plugs, receptacles, connectors, inlets, and mechanical interlock devices provide safe electrical connections in commercial and light industrial environments subject to temperature extremes, vibration, impact, dirt, moisture, corrosive elements, and wash downs. Housings are flame retardant, impact-resistant and non-corrosive Valox and nylon material. Rated to 20, 30, 60, and 100 A,...

Rotary Hammer performs hammer drilling and chiseling.

Equipped with 9.6 A motor, Spline Drive KHE 54 offers no-load speed of 135-275 rpm and 1,300-2,600 bpm. Vario-Tacho-Constamatic electronic speed control enables tool to maintain constant speed between load and no-load. Overload clutch limits maximum amount of torque applied if tool blocks during operation. Hammer offers rotational torque of 531 lb-in. and drilling range of Ã-½-1Ã-½ in....

The Ultimate Guide to Understanding Mobility

This eBook discusses technology advancements and mobility trends amongst a range of industries.

Detachable Clips keep gloves within reach at all times.

SquidsÃ-® Glove Grabbers(TM) hold gloves of every style and thickness for virtually any application. Model 3400 attaches to pant belt loop, while Model 3405 clips onto standard belt or tool belt. Both non-conductive, lightweight units are detachable and available in black, blue, high-visibility orange, and high-visibility lime.

Compound Miter Saws feature built-in laser for accuracy.

Models LS1013L and LS1214L are 10 and 12 in., dual slide miter saws with dynamically balanced, direct drive, 13 and 15 hp motors, respectively. They feature micro fine adjustments, soft start, and independent switch that allows laser to be seen with or without blade rotating. Designed with single piece aluminum base, saws include dual rails with dual steel linear ball bearings for accurate cuts...

Cordless Driver Drills weigh less than 4.5 lb.

Models DS18DVF3, DS14DVF3, and DS12DVF3 are 18, 14.4, and 12 V cordless power drills with 2-piece magnet motors delivering 400, 300, and 230 lb-in. torque, respectively. Two-speed transmission controlled by 1-touch speed shift knob allows user to select between 0-400 or 0-1,200 rpm on DS18DVF3 and DS14DVF3 models and 0-350 or 0-1,050 rpm on Model DS12DVF3. Measuring just over 7.5 in., units...

Spiral Saw features multi-use attachment.

RotoZip-® Spiral Saw(TM) accepts FS2 Flex Shaft, which converts unit into precision sanding, grinding, polishing, carving, and detailing tool. Attachment has pen-style grip that maximizes user comfort and design that promotes access to hard-to-reach or tight work-areas. Shaft lock button facilitates changing of any 1/16-1/8 in. dia accessory. Model FS2 works with range of Dremel-® accessories.

Soldering Iron handles heavy-duty applications.

Butane-powered UltratorchÃ-® Model UT-200A is 10Ã-¾ in. long with 1.2 in. chisel type soldering tip that is copper based with nickel and chrome plating. Unit comes to full operating temperature within 1 min and includes adjustable temperature control that regulates power from 572-986Ã-ºF. Metal handle, with refillable tank, holds enough butane gas to run over 1 hr. Portable iron is...

Saw Blades offer multi-coated carbide construction.

Aggressor line of thin kerf, carbide tipped saw blades cut at 1,200 sfm and feature C-shaped hooked chip breaker. Multi-layer coated 350 x 2.8 x 100 mm tooth blade cuts 6 sq meters of 52100 bearing steel in 3.7 sec at 250 rpm. Saw blades cut tube, pipe and solid ferrous materials in flying cutoff and re-cutting applications. Carbide and cermet inserts are available.

Dodge® Raptor Coupling Now Available in Three Larger Sizes

The Dodge Raptor coupling epitomizes the innovation and value that has made Baldor a world leader in industrial electric motors. For almost 100 years Baldor has been the go-to source for industries across the globe. The Raptor coupling is just one example of our dedication to engineered excellence and commitment to providing value and performance. See our video to learn more.