Hand Held Drills

Rock Drill reduces operator exposure to noise and vibration.

Designed to suppress noise and vibration, S250-M3 improves drilling production while decreasing fatigue regarding operators' ears, hands, and feet. Main airflow cylinder channel and exhaust allow efficient actuation of drill, and design drives more energy to face of rock. Vibration level also helps reduce components wear, promoting extended operation. There are 3 primary variations — jackleg,...

Read More »
Explosionproof Tool Tap Reel has 3 receptacle plugs.
Reels

Explosionproof Tool Tap Reel has 3 receptacle plugs.

Rated to Class 1 Division 1 and Class 2 Division 2, modular EPLRT3-100-HR lets operators in hazardous locations extend working reach of tools and lighting equipment. Product includes reel, 100 ftÂ- cord of SOOW cord, and 3 class matching twist-n-lock plug receptacles. Cord feeds onto reel assembly through 4 roller adjustable cable guide with ball stop. Housed within...

Read More »
Circular Cold Saw features fully automated inclined magazine.
Blades

Circular Cold Saw features fully automated inclined magazine.

Using carbide-tipped disposable blades to cut ferrous material at 90°, Model HCS-90E has inclined magazine which holds up to 3,500 lb of 12 ft long material. Once loaded with bundles, machine will run without interruption, cutting pre-programmed lengths, ejecting trim and remnants, and channeling good cut pieces to holding bin. Machine offers infinitely variable feed or reverse feed rate up...

Read More »
Computers

Pressure Decay Leak Tester has single-channel, benchtop design.

Available inÂ- 5 pressure ranges from vacuum to 150 psi with resolution to 0.001 psi, Raptor™ offers 10 discrete DIOs that allow automation via PLC or computer interface. UI on built-in touchscreen color display shows pressure plot, countdown timers, step results, coupling outputs, and current test pressure, while 10 on-board programs provide versatility for testing different types...

Read More »
Shaping Attachment machines complex features in one step.
Shapers

Shaping Attachment machines complex features in one step.

EPPINGER Shaping Attachment enables single-step machining of difficult-to-cut features, including grooves, Torx screw heads, splines, and gear teeth. Attachment drives cutter into workpiece in Z-axis at cutting speeds up to 1,000 strokes/min. At end of each stroke, integrated lift-off mechanism returns cutter to starting position without drag. With working stroke of 1.3 in. and max feed of 0.006...

Read More »
Rapid Mechatronic Gripper for Small Part Handling
Handling Equipment

Rapid Mechatronic Gripper for Small Part Handling

The EGP from SCHUNK is the electric small part gripper with the most compact performance on the market. SCHUNK expanded the EGP series with a smaller size (25), which weighs 110 g, and has a stroke of 3 mm per finger. The gripping force can be adjusted on 2 stages and its maximum gripping force amounts to 40 N. The gripper can handle workpieces of up to 200 g, making the gripper as efficient as...

Read More »
Water Jet Lance suits applications up to 24,000 psi.
Spray Guns

Water Jet Lance suits applications up to 24,000 psi.

By eliminating bend radius in hose that supplies high-pressure water, Model NCG24-535 minimizes stress on inlet connection. Instead, unit has inlet tube with 90° bend and safety shroud that surrounds hose where it attaches to lance. One-finger latch prevents accidental actuation, while patented trigger immediately dumps pressure when operator pushes it forward. Weighing 12 lb with standard...

Read More »
Platinum Tools® Showcases New 10Gig Termination Kit at InfoComm 2014
Hand Crimpers

Platinum Tools® Showcases New 10Gig Termination Kit at InfoComm 2014

CAMARILLO, Calif. - Platinum Tools® (www.platinumtools.com), the leader in solutions for the preparation, installation and hand termination of wire and cable, is proud to announce it will showcase the new 10Gig Termination Kit (P/N 90170) at InfoComm 2014, June 18-20 at the Las Vegas Convention Center, booths C5238 & N368j. The new system, which exceeds 10Gig performance standard...

Read More »
Jenoptik with New Products at LASYS
Lasers

Jenoptik with New Products at LASYS

From June 24-26, Jenoptik's Lasers & Material Processing division is to present the latest product developments for industrial laser-based material processing at the LASYS trade fair in Stuttgart. Jenoptik will be present in hall 4 at the LASYS even twice: Trade visitors will be able to catch up on the products of Jenoptik's Lasers & Material Processing division both at Jenoptik stand no. B71 and...

Read More »
Management Systems

Natureworks Packaging Selects Cardia Bioplastics as Partner to Develop Bag and Waste Management Products for the Australian and International Markets

Australia's Natureworks Packaging design, market and distribute proprietary bag and waste management products manufactured by Cardia Bioplastics using Cardia Compostable and Biohybrid™ resin technology. $200,000 of Cardia Bioplastics bag and waste management products ordered by Natureworks Packaging during the last 12 months and sold through their extensive sales force. Natureworks extend...

Read More »
Locon Sensors Withstand Extreme Temperatures
Sponsored

Locon Sensors Withstand Extreme Temperatures

Locon Sensor Systems offer robust sensor solutions for even the most severe environmental conditions. Their line of high-temp inductive sensors and their cylindrical photoelectric series can operate in temperatures up to 250 degrees Celsius. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers