Sandvik's New CoroTurn® Prime SL Heads Increase Speed of Feed Rates
CoroTurn® Prime SL Heads are offered in 40 mm diameter and can be fitted with solid steel bars and carbide bars. The SL Heads are designed to the requirements of oil and gas, aerospace manufacturers for diameters of more than 90 mm and overhangs of up to 8-10xD. Unit improves chip evacuation and chip control when used with PrimeTurning™.
Read More »
Keyless Chuck Adapter Now Simplifies the Overhead Installation Process
3/8 in. Keyless Chuck Adapter for Xtender Pole™ is suitable for professional contractor and low-voltage cable installers. Unit is compatible with standard round and hex shank bit and pairs with 3/8 or 1/2 in. drill. Xtender Pole™ features interchangeable heads to install J-Hooks, eye lag screws, ceiling wire, jack chain and threaded rod.
Read More »
Air Powered Motor Vises Utilize Push-to-Connect Air Fittings
Kurt’s Air Powered Motor Vises are designed for automated, robotized cells and applications. These units are operated on 20-100 PSI and the clamp force is achieved by using air FRL setting. The vises can be mounted to tables or fixtures with the help of sine keys and ½ in. bolts. Units come with optional encoder or double start thread motor and 3mm proximity sensor.
Read More »
Bernard Announces Changes to Fume Extraction Gun Offering
BEECHER, Ill., March 28, 2018 – Bernard has announced changes to its fume extraction gun offering. Effective immediately, Bernard™ FILTAIR™ Fume Extraction MIG Guns are transitioning to the Bernard Clean Air™ brand name and will become Bernard Clean Air Curved Handle Series Fume Extraction MIG Guns. In addition, several upgrades have been made to the former FILTAIR Fume Extraction Guns....
Read More »
Clamps Buying Guide
Do you know whether you need a hand, hose, pipe, cable or ground clamp for your project? What about the grip range? If you're unsure, download this buying guide all about clamps to help you find the right clamp for your project.
Read More »
RÖHM's Lubritool Minimizes Manual Lubrication Work
RÖHM’s Lubritool is offered in HSK-A63 and HSK-A100 interfaces. This unit consists of Lubriflux grease cartridge used for 100 cycle applications. The lubritool is stored in the machines’s tool magazine and upon instruction control is swapped into spindle and lubrication is done. Unit eliminates the interruption of the workflow for lubrication process.
Read More »
Kurt DX6 CrossOver Vise Provides Improved All-Directional Alignment
Fixtureworks’ Kurt DX6 Series Vise with GripSert jaws and inserts offer clamping capacity of up to 9 in. and feature light weight nut and brush seal design. GripSert carbide gripper inserts are offered in 0.14 in. clamping and come with two rows of teeth at different angles with a five-degree taper. The inserts with 3.5 mm clamp surface are designed to penetrate carbide, steel, hardened...
Read More »
MILLHOG® Cutter Blades come with radical chip breaker.
Esco MILLHOG® Cutter Blades are available in 37-1/2° and 30° standard O.D. angles and are made from T-15 tool steel with TiN or hard lube coating. These blades are used for beveling pipe O.D., flat face, and bore the I.D. simultaneously. Units are suitable for heavy-wall pipes made of Super Duplex stainless steel or P-91 alloys and come with EscoLock™ wedge-style rigid blade lock system.
Read More »
FCS18 RIP-R-Stripper offers removal rate up to 720 sq-ft of material per hour.
FCS18 RIP-R-Stripper is equipped with ¾ HP electric blade motor and 1/3 HP electric drive motors. Unit features heavy-duty unitized, welded steel-plate frame and comes with 50 ft extension cord, 2 x 10 in. straight blade with 6 in. cutting edge and 2 x 11 in. straight blade. Stripper’s exciter plate mounted to motor driveshaft transfers maximum power to material removed through orbital action....
Read More »
Level Master Device uses optical level sensor technology.
Level Master Wireless Leveling Device allows user to read leveling information from a separate display device. This unit enables simultaneous measurement with use of multiple detectors that support an accuracy of up to 0.01mm/1m. This Level Master comes with aluminum box for storage, alkaline batteries, device manual and an inspection sheet. Unit can transmit information to display devices up to...
Read More »
Long-Nose Wire Stripper/Crimper comes with Klein-Kurve™ handles.
Klein’s Long-Nose Wire Stripper/Crimper is suitable for electrical and HVAC applications. Unit is capable of stripping 10-20 solid and 12-22 stranded wire and crimping insulated and non-insulated connectors. This Stripper/Crimper comes with patent-pending head design and shear-type blades for optimal. The tip is used for grabbing, pulling and bending small wires.
Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.
Read More »
