New Adapter Kits Facilitate More Efficient Lifting
Stertil-Koni's two newest adapter kits are engineered for improved efficiency in bus and truck support. They provide more efficient lift by engaging the front and rear lifting points on buses and trucks, offering support for a larger range of axles. One of the new adapters ktis has been engineered expressly for transit buses, while the other is capable of supporting both trucks and school...
Read More »
New SuperSleeve Wall Sleeves Come with Stainless Steel Anchoring Screws
Marketair’s SuperSleeve Wall Sleeves are designed for insulated linesets, electrical/communications cabling and condensate drain hose. The 7.5 cm diameter sleeves can be flanged on both ends and telescopes from 15 to 30 cm. SuperSleeve comes with internal positive slope guide, an integral corrugated PVC cable guide for separating electrical/communications wiring from the linesets and drain hose...
Read More »
New Vise Force Wedge Clamps Feature Low Profile Dovetail Design
The Vise Force® Wedge Clamps are offered in 1.0, 1.5, and 2 in. jaw widths with serrated and machinable clamping surfaces. The units are designed for clamping multiple workpieces such as steel, brass, aluminum and plastic. The clamps come with internal return spring that avoids the buildup of chip and provide closer placement of multiple clamps. The unit’s dovetail design reduces movement,...
Read More »
New Quadrant Shifting System Increases Simulation Treatment Rate
The Quadrant™ Shifting System consists of shifting tool and closeable sliding sleeves that maximizes reservoir contact. The system is designed for activating sliding sleeves without a packer element. The unit’s design minimizes wellbore drag and reduces operational risk in long laterals. Quadrant system features a horizontal well with measured depth of more than 2,750 m.
Read More »
Saving Energy with Efficient Belt Drives
By introducing energy efficient belts on electric motor drives, you can implement a simple, cost-effective solution to achieve energy savings in your facility.
Read More »
Klein Tools® Offers a Complete Line of Duct and Sheet Metal Tools Perfect for HVAC Professionals
July 18, 2018 (Lincolnshire, Ill.) – Klein Tools (www.kleintools.com), for professionals since 1857, introduces a complete line of duct and sheet metal tools, including the new Duct Cutter with Wire Cutter, HVAC Hand Notcher, Tin Snips, Hole Cutter and more. When equipped with these durable, reliable tools, professionals can easily complete a range of tasks involved in this season’s HVAC...
Read More »
Platinum Tools® Showcases New Xpress Jack™ Termination Kit at 2018 CEDIA Expo
Now Available; Kit Includes Cat5/6 Cable Jacket Stripper, Scissor-Run Electrician’s Scissors, Xpress Jack Punchdown Tool, Hanging Tool Pouch, and 10 Blue & 10 White Keystone Cat6 110 Jacks NEWBURY PARK, Calif., July 12, 2018 - Platinum Tools® (www.platinumtools.com), the leader in solutions for the preparation, installation, hand termination and testing of wire and cable, is proud to announce...
Read More »
Platinum Tools® Xpress Jack™ Termination Kit Now Available; Featured at ISE Expo 2018
Kit Includes Cat5/6 Cable Jacket Stripper, Scissor-Run Electrician’s Scissors, Xpress Jack Punchdown Tool, Hanging Tool Pouch, and 10 Blue & 10 White Keystone Cat6 110 Jacks NEWBURY PARK, Calif., July 12, 2018 - Platinum Tools® (www.platinumtools.com), the leader in solutions for the preparation, installation, hand termination and testing of wire and cable, is proud to announce the new Xpress...
Read More »
Klein Tools Introduces Folding Jab Saw with Lockback Mechanism
Folding Jab Saw is offered with carbon steel blade that features triple ground teeth and cuts on the push and pull strokes. Unit comes with cushioned handle-end, non-slip grip handle and lanyard hole. The saw is suitable for cutting through drywall, wallboard, plywood, plastic and construction materials. Unit’s lockback mechanism keeps the blade fully open at 180 or 125 degrees.
Read More »
It's Cool Man
Weighing just 1,600 grams, the new PullMig welding torch from Fronius is incredibly light for a push-pull welding torch. Not only that, the developers have also succeeded in making it extremely robust: it can survive a fall from 3 metres completely unscathed. The stainless steel outer tube and anti-twist device in the zero degree position ensure that the torch neck, which rotates 360°, remains...
Read More »
The World's Most Compact Push-Pull Robot Welding Torch
Fronius has launched the world’s most compact push-pull robot welding torch: the Robacta Drive TPS/i. Thanks to its compact design and refined engineering, the component accessibility and TCP precision of the welding torch has been improved even further. What’s more, the dynamic of the drive unit has been increased to 33 m/s² – ten-times that of its predecessor generation. A consistent,...
Read More »
Locon Sensors Withstand Extreme Temperatures
Locon Sensor Systems offer robust sensor solutions for even the most severe environmental conditions. Their line of high-temp inductive sensors and their cylindrical photoelectric series can operate in temperatures up to 250 degrees Celsius. See our video to learn more.
Read More »
