New Atlona AT-HDVS-SC-RX Scaler is Embedded with a CrystalScale Technology
The Atlona AT-HDVS-SC-RX Scaler is equipped with a HDBaseT™ receiver and 4K/UHD capability at 30 Hz with 4:4:4 chroma sampling. The device receives HDBaseT for video output up to 4K/30 4:4:4, embedded audio, control and Ethernet over distances up to 330 ft. The CrystalScale technology features high-quality downscaling, upscaling and advanced image optimization capabilities that are used for...
Read More »
AME Releases RimWit Maintenance Tools for Loosening Stubborn Truck Wheels and Rims
The RimWit and RimWit Junior Fleet Maintenance Tools are designed for removing locked rims on commercial truck tires without causing any damage to tire sidewalls or rims. The aluminum or steel tools are manufactured to fit all standard semi-truck rims and are used for tire demounting process. These RimWit units come with patented wheel pulling technology. They are suitable for use in shop or in...
Read More »
Latest Hyde FC Revolution Seafood Processing Blades are Tensioned to Improve Cutting Quality
The Hyde FC Revolution Seafood Processing Blades are suitable for both fresh and salt water processing in land-based plants and ocean-bound factory ships. The units are constructed of high-grade stainless steel with Ra microfinish to reduce friction during cut. The blades are offered in sizes ranging from 90 mm to 350 mm in notched and non-notched types.
Read More »
The Concentrated Power of SPX FLOW Bolting Systems and Power Team Brands
ABU DHABI, UAE, Nov 12-15, 2018 – Through its Bolting Systems and Power Team brands, SPX FLOW provides a full range of safe, reliable, robust bolting and hydraulic power tool solutions. The tools are both powerful and practical, using advanced material technology to obtain stronger, lighter and smaller solutions to meet the demands of industry. SPX FLOW Bolting Systems offers innovative,...
Read More »
Saving Energy with Efficient Belt Drives
By introducing energy efficient belts on electric motor drives, you can implement a simple, cost-effective solution to achieve energy savings in your facility.
Read More »
Kaeser Introduces the M82 Portable Compressor for Heavy Duty Civil and Commercial Construction
The M82 is the newest portable compressor in the Mobilair line. The compressor features a 37 gallon fuel tank for 10 hours of operation, gull-wing doors, a high capacity, cold-start battery, and powder coated steel cabinets to protect from harsh environments. The product’s cooling features allows it to operate in temperatures up to 122 degrees Fahrenheit.
Read More »
Xuron Presents New TK2600 Bead Stringer Tool Kit for Handling Bead Wire and Findings
The TK2600 Bead Stringer Tool Kit consists of Model 410 Micro-Shear® Flush Cutter, Model 450 TweezerNose™ Pliers and a Model 494 4-in-1 Bead Crimper. The tools are offered with Rubber™ cushion grips and Light-Touch™ return springs. The Flush Cutter cuts soft wire up to 18 ga whereas the Pliers is used for grasping, bending and forming wire. The Bead Crimper features 3 folding stations for...
Read More »
EXAIR Offers Cold Gun Aircoolant System That Prevents Tool Burning
The Cold Gun Aircoolant System produces cold air at 50°F below supply air temperature. The system converts compressed air into cold air for cooling machine operations. The product removes heat for increasing tool life and productivity. It is factory set for optimizing gun’s cooling ability.
Read More »
New Force M Drills Come with Modified Four-Facet Split Point Geometry
The Dormer’s Force M Drills are designed for drilling stainless steel materials across various machines and conditions. The drill’s split point design increases chip formation, tool strength and wear resistance. The units are made from micro-grain carbide with multi-layered Titanium Aluminum Nitride coating. The drills come with an internal coolant delivery in sizes from 3 mm to 16 mm and 1/8...
Read More »
Air Products to Build, Own, and Operate Two New ASUs for Eastman's Coal Gasification Facility in Kingsport, Tennessee
New Long-Term Agreements Extend 35-Year Industrial Gas Supply Relationship LEHIGH VALLEY, Pa., Oct. 31, 2018 /PRNewswire/ -- Air Products (NYSE: APD), a leading global industrial gases company, today announced it will build, own and operate two air separation units(ASUs) to provide oxygen and nitrogen to Eastman's facility in Kingsport, Tennessee under new long-term agreements. The ASUs...
Read More »
New Spray Gun Features an Overhauled Fluid Tip Design
The DV1 is a new spray gun from DeVilbiss Automotive Refinishing. It features an overhauled fluid tip design that enables it to work with different coating types and flow rates in all climatic conditions. The spray gun is equipped with an integrated digital gauge that is designed and placed in-line at eye-level. The DV1 ships with 1.2 mm, 1.3 mm and 1.4 mm tips and a complete gun service tool...
Read More »
Don't Let Your Money Drain Down the Hole...Drill Steel with Euroboor
As a globally recognized manufacturer of industrial grade portable tools, Euroboor is at the forefront of drilling and cutting technology. Our reputation as an industry leader is built on robust products that fit a wide range of industrial cutting and drilling applications. See our video to learn more about all of our quality products.
Read More »
