Machinery & Machining Tools

Indexable-Insert Milling Cutter increases material removal rates.
Mills

Indexable-Insert Milling Cutter increases material removal rates.

Maximizing productivity and tool life, High Feed 6- increases material removal rates and handles high chip loads. This product, which handles difficult-to-machine materials ranging from stainless steel to heat-resistant superalloys, comes in 13 metric cutters with ODs from 50–160 mm and 9 imperial cutters from 2–4 in. as well as normal and close-pitch versions. Cutter bodies are...

Read More »
Micro-Translation Stage offers 25 mm travel range.
Positioners

Micro-Translation Stage offers 25 mm travel range.

Featuring 60 x 86 mm footprint, M-122 Closed-Loop Motorized Positioning Stage can handle payloads to 11 lb with velocity to 20 mm/sec. Optical linear encoder provides 100 nm resolution. Extended service life and optimized guiding accuracy with minimal backlash are guaranteed by preloaded ball-screw drive and precision crossed roller bearings with anti-creep cage assist. Product is suited for...

Read More »
New High Accuracy Positioning Tables/Nano Precision Stages from Primatics
Positioners

New High Accuracy Positioning Tables/Nano Precision Stages from Primatics

High Accuracy Positioning Tables/Nano Precision Stages, from Primatics, Inc., are used in applications where high accuracy and repeatability and/or smoothness are critical.-  All sub-assembly components are machined to very tight tolerances in order to achieve the required accuracy and repeatability.  Typical precision for these types of stages are measured in the sub-micron or nanometer...

Read More »
Termination System handles large diameter twisted pair cables.
Terminations

Termination System handles large diameter twisted pair cables.

Combining EZEX-RJ45 feed-through connectors with EXO professional heavy-duty frame and die crimper, EZEX-RJ45® Termination System provides modular solution- to make termination of large diameter twisted-pair cables error-free. Connectors have staggered feed through channels that allow for conductors up to 0.048 in. in diameter. Compatible with solid round or stranded wires, system features...

Read More »
Waterjet Mini Hop lets operators adjust abrasive flow.
Hoppers

Waterjet Mini Hop lets operators adjust abrasive flow.

With variable aperture, Permalign® V-Series Mini Hopper allows operator to make adjustments to abrasive flow, maximizing waterjet cutting productivity and minimizing abrasive consumption. Water resistant design helps prevent abrasive clogs that can cause stoppages and scrap out expensive material. Built for har abrasivejet environment, Permalign® V-Series Mini Hopper does not require enclosure,...

Read More »
Vertical Machining Center handles complex aluminum components.
Machining Centers

Vertical Machining Center handles complex aluminum components.

Equipped with 340 x 300 mm worktable, 5-axis Model DA300 accommodates workpieces up to 450 mm in diameter, 400 mm tall, and weighing 250 kg. Machine provides X-, Y, Z-axis travels of 450, 620, and 500 mm, respectively, at feed rates up to 60,000 mm/min. Direct-drive, motor-driven A-axis table offers 150° of tilt capability at 100 rpm, while rotary C-axis has full 360° rotational positioning at...

Read More »
Testers

Hygienic Jelly Testing Equipment meets needs of laboratories.

Drying room and GML03 laboratory depositor enable producers of jellies, such as medicated and functional gummies, to test new products while- increasing production of tested recipes to industrial scale. Allowing manufacturers to develop new recipes without disrupting production, equipment includes exchangeable pump system and choice of servo-controlled piston sizes. Depositor features recipe...

Read More »
Fusion Machine handles pipe from 16-48 in. OD.
Fusion Equipment

Fusion Machine handles pipe from 16-48 in. OD.

Designed to function in ditch, on ground, or on wheels, MegaMc® 1648 Series 2 features electric-powered hydraulic system to assist in all functions, including operation of jaws, pipe lifts, heater, and facer. Fusion carriage, mounted on wheeled chassis, can convert from 4 to 3 jaws as needed and interchanges with tracked counterpart to create self-propelled, all-terrain, track-mounted fusion...

Read More »
Molding Machinery

Medium Pressure, 2-Platen IMM offers 30-90 sec cycle times.

Capable of molding solid and foamed parts with density reductions from 5%–50%, 800 ton LUMINA MP800- features linear bearing support/guidance system, 98 x 68 in. mold space, 108 in. stroke, 2,000 ipm clamp speed, and hydraulic ejection. Molds are either cold runner or hot runner types and typically have aluminum cavity plates or gas assist. This 2-stage solution also features 6 in....

Read More »
Tilted Height Lines by ACSYS - Realistic 3D Effect without Depth engraving!
Software

Tilted Height Lines by ACSYS - Realistic 3D Effect without Depth engraving!

CSYS Lasertechnik presents a new technology available in the laser processing: Tilted Height Lines by ACSYS This designation stands for an intelligent technology to reproduce three-dimensional CAD reliefs with simple lines on most different materials. The lines are generated in the software (AC-LASER) by ACSYS. In the Software the lines cover the CAD Relief and follow the height profile contained...

Read More »

All Topics