Machinery & Machining Tools

Bending Machine operates in horizontal and vertical positions.
Benders

Bending Machine operates in horizontal and vertical positions.

Suited for rolling standard and special sections as well as tube and pipe in mild structural stainless steel, aluminum, brass, and copper, Carell 305HV Angle Rolling Machine features independent adjustment of both lateral bending rolls and powered rotation of all 3 bending rolls. Dual LED displays monitor bending roll positions, while double pinch geometry permits pre-bending of leading and...

Read More »
DC-Coupled MEMS Accelerometers suit commercial and military use.
Accelerometers

DC-Coupled MEMS Accelerometers suit commercial and military use.

Model 7500M10 and 7500M11 DC-coupled analog variable capacitance accelerometers feature micro-machined capacitive sensing element housed in hermetically sealed stainless steel case. Products include VC accelerometer chip, with high drive, low-impedance buffering for optimal responsiveness. Circuit amp, differential output, and voltage regulator all minimize effects of supply voltage variation....

Read More »
Heavy-Duty Tube Fabrication Tools aid small bore tube assembly.
Benders

Heavy-Duty Tube Fabrication Tools aid small bore tube assembly.

Suited for CPI(TM) and A-LOK® tube fittings, hand-operated tools include tube benders with indexing handle for Â-¼, 3/8, and ½ in. tubing sizes and calibration markings for left-hand, right-hand, and offset bends. Tube cutter for 1/8 and 1 1/8 in. stainless steel, steel, soft, copper, and aluminum tubing is also included, along with deburring tool for 3/16-1½ in. OD...

Read More »
Deposition Systems

PECVD System supports sub-28 nm dielectric films.

Incorporating interface engineering to minimize RC delay constant without changing materials, VECTOR® Excel(TM) addresses needs of advanced technology nodes that require pre- and/or post-processing of dielectric films, such as diffusion barriers. System's PECVD module employs multi-station sequential deposition architecture that results in optimal wafer-to-wafer, within-wafer, and...

Read More »
Mechanical Drive Riding Trowel operates in tight spots.
Power Trowels

Mechanical Drive Riding Trowel operates in tight spots.

Operating on 688 cc, air-cooled Honda GX690 gasoline engine, Model MP 215 is equipped with two 36 in. diameter, 4-blade non-overlapping rotors, and torque converter clutch system, which gives operators full variable speed control of rotors up to 145 rpm. Entry-level riding trowel includes manual steering and blade pitch controls, and electric-powered spray system for application of retardant....

Read More »
Printers

Essemtec to Introduce Paraquda Pick-and-Place at FIEE-ElectronicAmericas

Essemtec Brazil announces that it will introduce the new Paraquda SMT pick-and-place system to the South American market at the upcoming FIEE-ElectronicAmericas exhibition, which is taking place from March 28 to April 1, 2011 an the Anhembi Exhibitis Pavilion in Sao Paulo. Paraquda is one of the world's most modern SMT pick-and-place systems, developed to place all current and future SMD...

Read More »
Software

Mail Processing Solution from Engineering Innovation and Parascript Selected by Panhandle Presort Services to Automate Flats Processing

-Panhandle Presort Services achieves return on investment within 10 months with address recognition rates of 95 percent - Longmont, CO, - Parascript, LLC, the image analysis and pattern recognition technology provider, today announced that Panhandle Presort Services (PPS), a complete mail service company providing mail solutions in Texas, has implemented Engineering Innovation's EZ-Flats...

Read More »
Cordless Metal Saw features 4-pole frameless motor.
Blades

Cordless Metal Saw features 4-pole frameless motor.

Compact M18(TM) Cordless 5-3/8" Metal Saw is powered by RED LITHIUM(TM) Battery Technology, which allows for over 200 cuts of ¾ in. electrical metallic tubing per charge. Cut guide, impact-resistant window, and LED light optimize line of sight. Tool-free depth adjustment supports cutting depth from 1/8-2 in., and stainless steel shoe prevents surface marring due to chip build-up. Saw cuts...

Read More »
Parallel Positioner comes in standard and vacuum versions.
Controls and Controllers

Parallel Positioner comes in standard and vacuum versions.

Measuring 130 mm dia x 115 mm high, M-811 Miniature Hexapod can handle loads to 11 lb and position them in all 6° of freedom with 0.04 Â-µm actuator resolution and ±0.5 µm repeatability. Unit features XYZ travels of 35/35/13 mm and velocities to 10 mm/sec. Positioner comes bundled with software and digital controller with high-speed Ethernet connectivity. Unlike rotation...

Read More »
Woodworking Blades deliver clean, quiet cuts.
Blades

Woodworking Blades deliver clean, quiet cuts.

Suited for use with most table, circular, and panel saws, 12 in. dia Woodworker II blades are available with 1 or 5/8 in. bore or can be customized to end-user specifications. Products are engineered from corrosion-resistant C-4 micrograin carbide and have 1/8 in. kerf. Suited for making clean cross cuts, 48-tooth design facilitates feeding, and sharp teeth points have 25° bevel....

Read More »

All Topics