New Machinery & Machining Tools Products

Collet Closer is suitable for miniature workholding.

Tiny Mini-Collet Closer is 1-1/2 in. square with 3/4 in. dia capacity, can be mounted on vertical machining centers or CNC drilling and tapping machines, and is suitable for machining miniature parts such as medical devices, fuel injectors and computer components. It can be used as single unit or in multiple configurations either horizontally or vertically, and can be activated by air or...

Assembly System reduces damaged materials and reworks.

Fully automated tube nut assembly system simultaneously operates 4 slide mounted electronic nut runners that travel on and off tube nuts on command from computer, which controls operation and records torquing data to disc. System uses clutching socket end effector designed to travel straight on and straight off from side of any nut eliminating tedious task of positioning tool on tube nut.

Protective Sleeves save labor.

Coated, ballistic Cordura(R) Sidewinder sleeves, with industrial hook and loop closure, allow easy assembly and removal. Sleeves install without disconnecting hydraulic, electrical, and pneumatic hose and cable bundling and can be removed easily for hose maintenance. Material is available in variety of circumferences and bulk lengths to 150 ft for OEM and maintenance operations.

Grinder is programmable to 10 millionths accuracy.

EZ-Surf XA Surface Grinder combines Newall Microsyn digital linear encoders with software specifically designed to interface with scales. It permits machinist to operate in manual, semi-automatic or fully automatic modes. EZ-Surf comes with 7 in. wheel with 8 in. wheel capacity, integral 2-diamond wheel dress, 3 in. diameter spindle, and 1.5 HP continuous-duty spindle motor. It provides 100 ipm...

Injection Molding from 3D Printed Molds

Check out this white paper to see how 3D printing may be a beneficial alternative to traditional mold making processes.

Linear Motion Slide features toothed belt drive.

STAR Linear Motion Slide has steel-reinforced, polyurethane belt drive system for speeds up to 5 meters/sec with repeatability of -

Vertical Tube Benders produce up to 8 bends per cycle.

Twin Head Vertical Tube Benders cycle in 5 to 8 seconds. Each bending head is moved by its own screw to set up center to center distance between bends. Center distance is available from 4 to 80 in. Heads have adjustable angle of bend stop ranging from 0-

Truck Rim Cleaner blasts off dirt quickly.

GLPX Extreme rim b1aster uses 0.170 to 0.330 mm steel shot to blast away powder coatings, dirt, grease, oil, stones, and other road elements from steel or aluminum truck rims up to 26.5 in. dia. Cycle time is 1.5 to 5 min depending on thickness of coatings to be removed. Elevator system cleans out old particulate to keep shot clean with each cycle. Unit has three 5 hp impeller motors, automatic...

Ball Screw Wiper protects against contaminants.

Combination Wiper includes friction type finger wiper in front of felt wiper. Dual wiper keeps contaminants from entering ball nut, while simultaneously lubricating ball screw. Felt doubles as lubricant reservoir, maintaining constant thin film of oil on screw thread as ball nut moves. Because minimal amount of oil is deposited on thread, ball screw oil consumption is reduced by 75%. Wiper is...

Metal Thread Inserts fit wood and composition board.

Three metal thread inserts install without need for special tools. Knife thread inserts, available with coarse and fine internal threads, furnish holding power in hard woods such as oak, maple, and mahogany. Finsert thread inserts provide strong metal threads in softer materials, and prevent splintering, splitting, and thread pullout. Hex Drive thread inserts are for soft materials such as pine,...

Horizontal Machining Centers are FMS system-ready.

HU50-5AX tilting trunnion table type machine accommodates part dia up to 27 in. and weights up to 1430 lbs. 50 taper spindles are available with up to 12,000, or 15,000 rpm and 40 taper up to 20,000 rpm. HU40T features max part dia of 20 in. 40 taper spindles are available with up to 12,000, 15,000, 20,000 rpm or 30 taper up to 40,000 rpm. Both machines hold 0.00012 in. true position through all...

Dodge® Raptor Coupling Now Available in Three Larger Sizes

The Dodge Raptor coupling epitomizes the innovation and value that has made Baldor a world leader in industrial electric motors. For almost 100 years Baldor has been the go-to source for industries across the globe. The Raptor coupling is just one example of our dedication to engineered excellence and commitment to providing value and performance. See our video to learn more.