Machinery & Machining Tools

Holesaws come in industrial and self-service packaging.
Blades

Holesaws come in industrial and self-service packaging.

BAHCO Holesaws include bi-metal holesaws and carbide-tipped saws. Bi-metal holesaws feature plastic tooth-guards, which pull out and provide pictograms and instructions, including saw dimensions, appropriate arbor sizes and recommended rpm for specific materials. Bi-metal and carbide-tipped holesaws are available in sizes ranging from 9/16 to 6 in. in diameter. Packaging features bar codes,...

Read More »
Saw Blades work with a variety of materials.
Blades

Saw Blades work with a variety of materials.

Bimetal 3840, Carbide 3846 and Woodcutting 3842 reciprocating blades feature precision-ground teeth and are available in sizes and sets specific to any cutting application. Users can install electrical wall connections, heating and air-conditioning systems or cut through ceilings and walls. Reciprocating saw blades cut metal, wood, brick, pipe, plasterboard, glass and tile.

Read More »
Taping Machinery

Test and Taping System conserves factory floor space.

MP-PLUNGE test and tape machine is designed for mid-volume input from tube or bulk-to-tape applications requiring plunge-to-board test capability. It achieves throughputs of up to 3,600 pph and its integrated processes include vision inspection, electrical test and taping with optional laser mark capabilities. Unit is RF-compatible and interfaces with most standard testers. Rejected parts are...

Read More »
Gripping Rails with Clamps improve holding force.
Chucks and Collets

Gripping Rails with Clamps improve holding force.

Pitbull Gripping Rails, with built-in clamps, maintain parallelism on non-ferrous or ferrous parts. Their asymmetric design allows for precision tolerances. Pitbull Gripping Rails also improve holding force of magnetic chucks when used to hold difficult or irregularly shaped ferrous workpieces. They allow users to add extra steel blocking to increase resistance against sliding, and can hold large...

Read More »
Workholding System has 8 clamping stations.
Workholding Systems

Workholding System has 8 clamping stations.

CT Series Cluster Tower maximizes multiple part workholding for spindle utilization, reducing tool change time and machine travel from part to part. It has automatic adjustment system that accommodates any size part within opening range. Towers are convertible from 8 to 4 single stations. Workholder is suitable for small and mid-size machining centers, including horizontal or vertical machining...

Read More »
Interchangeable Tooling fits most punch presses.
Tooling

Interchangeable Tooling fits most punch presses.

Ultra XT tooling line combines quick setup, easy installation, fast maintenance and interchangeability with other suppliers' tools and tooling systems. Tooling has hardened and ground guides, which reduce abrasive action of punching, and interior and exterior spiral grease grooves, which diffuse heat. Unit works with Amada, Finn-Power, Murata Wiedemann, Euromac, Nisshinbo, Strippit and other...

Read More »
Presses

Straight Side Press forms and blanks.

General-purpose press has operating range of 220 to 1100 tons, runs at 150 strokes/min, and has stroke range from 3.9 to 24 in. Press is available in 3 configurations: eccentric motion/single gear reduction for constant slide velocity; eccentric motion/double gear reduction that increases torque for heavier loads; and link motion/double gear reduction unit that offers 50% more torque while...

Read More »
Mortar Mill grinds up samples for analysis.
Grinders

Mortar Mill grinds up samples for analysis.

MS 100 Rapid Mortar Mill homogenizes sample volumes of 2 to 25 mL to particle size less than 20 microns, enabling samples to be pelletized for subsequent use in X-ray fluorescence or other spectral analyses. Grinding sets are available in 2 sizes and 5 different materials. Required fineness is typically achieved in 3 to 5 min. Unit has digital speed control settings for mortar and pestle, timer,...

Read More »
Welding End Prep Tool removes tube stubs from header.
Machinery

Welding End Prep Tool removes tube stubs from header.

Mini MILLHOG® air-powered ID clamping end prep tool produces high torque at low rpm for milling hardened welds that have been exposed to high heat and pressure cycling. Its heavy-duty mandrel features clamp ribs that will not flex. Running at 34 rpm and generating 1,200 ft-lb of torque at cutter blade, Mini MILLHOG uses TiN-coated blades to produce a clean, continuous chip without cutting...

Read More »
Plasma Cutting Package weighs only 35 lb, goes anywhere.
Plasma / Flame / Laser Cutters and Cutting Machinery

Plasma Cutting Package weighs only 35 lb, goes anywhere.

Lightweight and portable, Handy Plasma 550 has 35 A of cutting power at 40% duty cycle, making it able to cut 1/2 in. material. Output is adjustable so operator can tailor current for material to be cut. Power line conditioner lets unit operate off auxiliary power sources and handle poor power lines without damage, making it suitable for field use. It comes with company's PT-31 torch for drag or...

Read More »
Solder Redefined
Sponsored

Solder Redefined

Indium Corporation has developed a new twist on traditional solder by developing a composite with a reinforced matrix internal structure. The result is a solder with increased strength and reliability. Check out this video to learn more about the mechanics behind the groundbreaking technology.

Read More »

All Topics