Machinery & Machining Tools

Machinery & Machining Tools

Wire Stripper strips hard-to-cut insulation.

Jan 04, 2002

AirStrip 2700 cuts and strips both single- and multiple-conductor wire and nearly all types of insulation materials. It runs at speeds up to 10,800 two in. pieces per hour, with wire thicknesses from 32 to 8 AWG and lengths from 1 in. to 1 1/2 miles long. Unit is microprocessor-controlled and can handle up to 1000 programs containing separate piece length, batch quantity, measuring increments and... Read More

Machinery & Machining Tools, Mounting & Attaching Products

Locking Kits fit Haas machining centers.

Jan 03, 2002

Ball Lock(TM) fixture kits contain all components needed to locate and lock fixture plates to subplates. System provides quick change capability, and holds plates together with working loads up to 20,000 lbs. Standard kit includes correctly-sized subplate and fixture plate, both pre-drilled with ball lock bushings installed and correct number of shanks, T-slot nuts, sine fixture keys, and socket... Read More

Machinery & Machining Tools

Collet Chucks bolt directly to lathe spindle nose.

Jan 02, 2002

Direct mount collet chucks can be used on any spindle that uses draw tube type actuator. With pull back design, compact units are suited for clamping small diameter workpieces, increasing tool clearances and reducing strain on spindle bearings. Rigid clamping allows increased machine speeds for bar feed applications. Chucks are available in types 5C, 16C, 3J, 20C and 25C. Threaded nose is... Read More

Machinery & Machining Tools

Nanotechnology System enables nanolithography.

Dec 27, 2001

NanoMan(TM) combines Dimension Series platform SPM/AFMs with NanoScope® IV SPM controller and Dimension CL Closed-Loop Scanner Head. It includes user interface and software for intuitive operation in moving objects at nanometer and molecular levels. NanoMan provides censored scanning for sub-micron scan sizes. Read More

Machinery & Machining Tools

Punching Machine processes material up to 0.312 in. thick.

Dec 27, 2001

TRUMATIC 5000 Rotation (TC 5000 R) machine offers 4600 ipm positioning speed, hydraulic punching head capable of 1200 punching strokes per minute, and 50 x 100 in. working range. Two separate motors are controlled synchronously and without mechanical link. Racks and pinions interlocked at an angle provide stiffness for drive system and improve gantry's ability to withstand stress. Hydrostatic... Read More

Machinery & Machining Tools

Water Jet cleans tanks fast.

Dec 21, 2001

Model NLB 3750-40-20K water jet head operates at pressures up to 20,000 psi, reducing tank cleaning time. Two high-velocity water jets mount on rotating head. Flow of high-pressure water causes water jets to spin vertically and head to spin horizontally, resulting in complete 3D coverage of tank interior. Head can be attached to telescoping lance, so no personnel need to enter tank. It can remove... Read More

Machinery & Machining Tools

Miter Saw features 12 in. blade.

Dec 19, 2001

C12FSA Sliding Dual Bevel Compound Miter Saw operates on 12 Amp motor that gradually progresses to maximum RPM level, preventing upward jerk due to torque when started. Constant blade speed delivers clean cut, due to electronic feedback control feature in motor. Overload protection safety device shuts itself down if it begins to draw too much power. Safety chip deflector prevents wood chips from... Read More

Machinery & Machining Tools

Brazing/Soldering Machine is designed for small assemblies.

Dec 18, 2001

Rotary Index 100 is 36 in. wide by 48 in. deep and operates at rates between 100 and 200 parts per hour, depending on assembly mass and configuration. Brass, copper, steel, stainless, and aluminum can be joined on machine. Unit is equipped with clear, acrylic guarding on 3 sides. It requires 120 VAC, natural gas or propane, 80 psi air, water and drain. Read More

Machinery & Machining Tools

Belt Sampler provides continuous, real-time sampling.

Dec 17, 2001

Auto-Belt Sampler(TM) (ABS) automatic system eliminates need for dedicated personnel, and has ability to collect complete cross-sectional aggregate samples from moving conveyor belt in less than 1 sec. Pneumatically operated, unit can be run manually or fully automated. System includes base machine, divider/cutter assembly, contour support idlers at point of sweep, operating sensors, NEMA 12... Read More

Machinery & Machining Tools

Assembly Press builds and tests at same station.

Dec 17, 2001

Servo controlled, ball screw assembly press and measuring system can be used for production, off-line testing, lab development work, and training and back up. It has built-in on-board force and distance sensors, plus encoder-equipped servo motor, so it can simultaneously monitor and control force and position. It can press to force/position, then test parts such as springs, check valves, shock... Read More

Machinery & Machining Tools

Hammer Drills have high torque.

Dec 17, 2001

Cordless models 3870-04 18 V and 3670-04 14.4 V have 450 and 425 in.-lb of torque, respectively. Their 17-position clutches allow user to control torque level for specific applications and to select drill or hammer mode. Each tool has two-speed gear train, which provides 450 or 1500 rpm and creates powerful hammer action, delivering 0 to 5,000 and 0 to 17,500 BPM. By changing bit, they provide... Read More

Machinery & Machining Tools

Shrink Fit Tool creates chatter-free machining.

Dec 17, 2001

Tru-Therm induction heating/cooling unit can handle toolholders and cutting tools from 3/16 to 2 in. dia. Four different size induction coils come with system. Coils can be changed in 5 sec without need to power down system. This allows operator to use most efficient size coil for every holder. Touch-screen programming and simple cutting tool menu allow operator to specify tool size and cutting... Read More

Machinery & Machining Tools, Optics & Photonics

Profiler utilizes Windows-based operating software.

Dec 17, 2001

WinCamD 3-dimensional beam intensity profiler features 4.65 µm square pixel size and 14-bit analog-to-digital converter that gives it greater than 16,000 levels of intensity resolution. WinCamD includes pass/fail settings for beam width, relative power, Gaussian and top hat fit, and data logging. It can be used for pulsed (as low as 1 Hz) or continuous-wave beams. Use of variable electronic... Read More

Machinery & Machining Tools

Bag Packing System can reach outputs of 12 tons/hr.

Dec 11, 2001

Turbo Bag Packer valve bag packing system is suited for multiple product environments where particle size and characteristics differ. Unit is designed for 24 hour/day operation. Impeller's horizontal arrangement aids in reducing turbulence during filling cycles, and results in less air in product. Inflatable valve seal and integral bag clamp provide dust control. Features include electronic... Read More

Machinery & Machining Tools

Winding System is designed for optical fiber.

Dec 11, 2001

Table top Model RS 100 FO features both spooler and pay off and can be operated in standing or sitting position. Control panel offers digital entry of winding parameters such as package width and material length. Stepper motor provides pitch control with digital readout in .0001 in. or 2.5 micron increments. Speed and tension are managed ultrasonically with non contact loop detector. System is... Read More

Machinery & Machining Tools

Deburring System features multi-directional wiping action.

Dec 11, 2001

Semi-automatic double head flow-through deburring system can accommodate workpieces from 3 to 60 in. long. Three horsepower motors drive each of four 12 or 14 in. disc brushes. Brush motors are mounted on tool slides, while 2 counter rotating brushes per side provide 360° deburring action to both ends of extrusion simultaneously. Variable speed conveyor system allows for deburring rates up to... Read More

Machinery & Machining Tools

Electrode Tip Dresser maintains geomery of electrode tips.

Dec 11, 2001

Hand-operated Electrode Tip Dresser is suitable for lower volume users of resistance welding processes. Dressing is accomplished by bringing electrode tips together over tool in no-weld reduced pressure mode, and hand ratcheting dresser tool. Tool's steel cutter blade dresses both tips simultaneously to ensure perfect tip alignment. Read More

Machinery & Machining Tools

Grinding Disc handles stainless steel parts.

Dec 11, 2001

Tiger Disc provides higher cut rates and has 50-65% more abrasive cloth per disc than conventional zirconium discs. It has abrasive cloth suitable for cool-cutting stainless steel, prevents dulling and glazing of abrasive grains, and has flat configuration for smooth grinding action. Disc is available in 4.5 and 7 in. dia, with and without nuts, and in grit sizes of 60 grit for maximum cut rate... Read More

Machinery & Machining Tools

Power Chucks keep jaw force at maximum speeds.

Dec 11, 2001

Royal LS-HS Series three-jaw, wedge-type chucks maintain 80% of jaw force at high speeds, permitting turning of large dia work parts or frail work parts requiring light clamping force to prevent distortion. Chucks are made from high-alloy steel. They are available in 24-36 in. sizes with all standard master jaw configurations. Chip and coolant protection reduces lubrication frequency, increases... Read More

Machinery & Machining Tools, Material Handling & Storage

Magnets are suited to heavy-duty shop floors.

Dec 11, 2001

Uses for STRONG-MAG(TM) industrial magnets include jigging, clamping, positioning, work holding, lifting, moving, and gripping. Available shapes include button, cylindrical, flat, round, rectangular, and horseshoe. Magnetic materials range from ceramic and alnico to neodymium iron boron and samarium cobalt. STRONG-MAG(TM) magnetic products also include permanent magnet chucks and magnetic... Read More