Push-On Coax Connector terminates cable.
Designed for commercial and residential applications, EZ Twist requires no tools or crimping. To terminate, twist connector onto cable for secure connection. Device eliminates screw-on connections to outlets by pushing connector onto outlet to lock in place and pulling to remove. Straight push-to-lock method is used in high-density installations like home cabling enclosures, where space for...
Read More »Liquid-Tight Conduit suits continuous flexing applications.
Nonmetallic Type LNM-P will not wear from repeated flexing or vibration. Made of flame-retardant PVC, it resists oils, mild acids, and exposure to sunlight, and works in temperatures from -20Ã-
Read More »Dimming Ballasts are designed for T5/HO lamps.
Mark X Powerline Dimming Ballasts provide 100% to 1% full-range dimming for 1 or 2 F54T5/HO, FT55W, or FC12T5/HO fluorescent lamps. They feature programmed-start operation; lamp ignition at any light setting, including 1% dim level; operation above 40 kHz to minimize risk of interference problems; and lamp end-of-life detection system. Ballasts are encapsulated in low-profile cases measuring...
Read More »Conveyor Belts have insert rollers for better turns.
Insert rollers on Series 2400 radius belts enable low back pressure accumulation around turns with ratios of 2.8 and 1.7. Belts have gray acetal rollers located directly on belt rods. They protrude beyond top and bottom of belt, allowing manipulation of product speed to belt speed. Belts are available in white and gray polypropylene and white and blue acetal. They are built in widths from 6.0 in....
Read More »The ROI of a Full Service Manufacturer
Full service manufacturers incorporate a complete line of production capabilities to facilitate fast, cost-efficient manufacturing of complex products without the need for multiple contractors.
Read More »Transformers are for full rate or ADSL applications.
Engineered to match Texas Instruments' AC5 octal chipsets, Bel S560-6600-Z6 and S560-6600-CE transformers offer total harmonic distortion in EP10 packages. They are suited for Digital Subscriber Line Access Multiplexer equipment and may be specified for remote site Digital Loop Carrier multi-port applications. Devices feature electromagnetic interference suppression, operating temperature range...
Read More »Cord Sets extend, then snap back.
Retractile cords are coiled in helical shape that allows cord to extend to 4:1 or 5:1 ratio. A 48 in. cord, for example, will extend to 20 ft. To maintain integrity in harsh environments they are constructed with thermoset rubber jacket that is waterproof and resistant to pinching, abrasion, oils, greases, chemicals, ozone and sunlight. Cords are available in SOW and SJOW configurations with 2 to...
Read More »Power Supply mounts on chassis, backplane or rack.
Model 1.5.500 encapsulated linear power supply has output of 5 Vdc at up to 500 mA. It measures 3.5 x 2.5 x 0.88 in. with industry standard pin configuration. Voltage accuracy is Ã-
Read More »Power Supply Connectors are DeviceNet compliant.
HR31 Series power supply connectors are offered in 5 positions and in 5.08 mm pitch. Through-hole type headers are available in both straight and right-angle versions and contacts are available with solder or gold plating. Low height of 10.2 mm allows for high-density mounting. Connectors are supplied with 2 forms of locking: snap-lock, and permanently attached self-aligning screws (on plug) and...
Read More »Reels stay together and keep products safe from damage.
Dead Bolt reels feature stay-tight bolt assembly for safety. They are available in variety of sizes to accommodate nearly any type material, and come fully assembled or ready for assembly. Reels have tapered start holes and multiple tie-off holes to reduce material waste, and are available with optional water resistant cores. They can be stacked, making transport, material handling and storage...
Read More »DC-DC Converters provide extended temperature operation.
IC-Style DC-DC Converters are 3.3 V-input surface mount devices with footprints of 1.64 cm2 and dual isolated outputs of either 12 or 15 V. They are fully compliant with CECCO0802 standard for reflow soldering at 280Ã-
Read More »Increase Workplace Safety, Manage Heavy Loads with Equipment from A-Plus Warehouse
A-Plus Warehouse carries a wide selection of commercial and industrial material handling equipment at affordable prices. Check out the video to learn more.
Read More »