New Electrical Equipment & Systems Products

Active Flow Switch works in pipes up to 4 ft dia.

FS30 flow switch works with any of company's flow sensors to send output at set flow rate. It can be inserted in pipe sizes 1/2 to 48 in., mounted on sensor or remotely, and set to activate on rise or fall. Set point is input using rotary digital switches. Switch has variable hysteresis or deadband setting to accommodate varying amounts of turbulence. If turbulence is significant, deadband keeps...

Power Connectors handle large electrical loads.

Amphe-Power Connector Series allows users to increase current load per circuit while reducing total number of circuits. Series consists of Power P-lok, GT Reverse Bayonet, and threaded MS5015 style connectors, all incorporating RADSOK socket system. Size 8 AWG contacts handle currents up to 69 A, while size 4 AWG will handle up to 120 A. Based on industrial standard MIL-C-5015, connectors are...

Microwave Relay works at speeds up to 6 GHz.

MW3HP, MW4HP and MW6HP microwave frequency relays have 3, 4 and 6 GHz capabilities respectively, work in temperatures of -65 to +125 Ã-ºC, and withstand 30 G vibration and 100 G shocks. At 6 GHz, modules have 18 dB signal isolation, stable insertion loss of 0.38 dB, and VSWR of 1.30:1. Applications include precision test equipment, and aerospace and military communication systems. PCB...

Servo Motors feature internal Hall sensor feedback.

ELCOM ST(TM) slotted brushless DC servo motors, with 6-slot lamination design, are available in stack lengths of 1/2, 1, 1 1/2, and 2 in. All have 4-pole rotor featuring neodymium iron-bore magnets. Continuous torque output up to 49 oz-in. can be achieved with motor speeds up to 8,000 RPM and power output up to 188 watts. Mounting configuration is consistent with NEMA 23 standards.

Heated Deck Panels

Heated Deck Panels: The playbook to how these snow-free walkways work for bridges, sidewalks, and platforms

Interconnects are available with 10 to 100 I/Os.

TFM and SFM Series .050 in. pitch interconnects are designed for applications requiring blind mating and/or high number of mating cycles. They are available with board spacings from .236 to 1.472 in. Three-finger Tiger-Eye contacts in SFM Series are stamped and formed with soft Beryllium Copper and heat-treated to optimize spring properties. Tiger Eye LITE three-finger contact is also available...

Flexible Conduit is designed for computer power wiring.

Type CBLA electrical flexible conduit is liquid-tight with flame-retardant jacket. It is available in trades sizes from 3/8 through 4 in. with inside bend radii from 2 to 12 in. Type CBLA is suited for temperature ranges from -20Ã-

Flyback Transformer is suitable for portable applications.

Model 4283-1200 Hi-Voltage Flyback Transformer powers portable applications that require up to 2000 Vrms. Encapsulation techniques and manufacturing processes were used to make 4283-1200 virtually corona free. Providing primary-to-secondary isolation of up to 12 KVdc, Model 4283-1200 is suitable for compact, high-voltage, low-power applications.

Folded Covers protect equipment.

Folded covers are available in wide range of materials to suit environment, from light duty dust to harsh abrasives. They have internal support system consisting of stiffeners or ribs made from rigid PVC and die cut to fit guide configurations of equipment to be protected. Folded bellows have maximum open-to-close ratio, useful in limited space. Mounting end plates can be engineered and...

Gigabit Ethernet Switch comes in 2 and 5 slot versions.

Mach 3000 Series with software v2.20 allows high-availability backbone structures to be connected to rail switch rings via fast redundancy mechanisms. Switch handles up to 40 Gigabit Ethernet or 160 Fast Ethernet ports, with total bandwidth up to 40 Gbits. Software includes quality of service functions such as MAC address-based data prioritization and automatic configuration for low maintenance...

Narrow Pincer fits into confined areas.

For applying and removing stainless steel clamps, Narrow Jaw Pincer is only 3/8 in. wide, allowing it to fit into tight areas. It is made of forged steel with plastic-covered handles that make gripping easy. Smooth, rotating action of pincer's handles allows tool to operate easily. Applications include retrofit or repair operations, where equipment, appliances, and machinery is constructed with...

Eliminate Expensive Repairs with the Hot-Shot Pipe Thawing Machine

The new Hot Shot Pipe Thawing Machine delivers an innovative and highly effective approach to thawing frozen pipes. Easy to use and versatile, it is loaded with robust features that further suit it to many challenging environments. To learn all about it, see our video.