RF Relays offer low power consumption.
Models G6Z, G6Y, and G6W have power consumption rates of 200 mW, while G6K-RF offers rate of 100 mW. At 1 GHz, isolation for models G6K-RF and G6Y is 20 and 60 dB, respectively. At 2.5 GHz, isolation for models G6Z and G6W is 30 and 60 dB, respectively. Model G6Z works at 50 and 75 ohms. Models G6Z and G6W offer Y and E input/output arrangement and are SMT and PCB thru-hole mountable. G6Y relays...
Read More »AC inverter suits variable torque applications.
Model 3G3PV includes built-in, on-board communication protocols of MetasysÃ-® and Apogee(TM). Inverter also offers RS-422 and RS-485 communication. Its provides 4-line engineering display, removable terminal strip, and split faceplate. Keypad can be used with access to terminal strip. High-slip braking feature slows inverter down. Model 3G3PV is available from .75 to 125 hp in 230 Vac and...
Read More »Brush Motor eliminates wire-wound coil.
ThinGap(TM) TG3300-70B slotless brush PM motor incorporates armature coil assembly that eliminates bulky iron core. It delivers max continuous torque of 80 oz-in. at 10,000 rpm, using input voltage of 24 Vdc and current of 27.5 A. Motor is rated at over 1 hp, yet weighs less than 34 oz,and is thermally rated for operation up to 160Ã-
Read More »
Tilt Switch provides level detection in hazardous areas.
Light duty TC-3X tilt switch can be used with dry bulk materials 15-60 lb/ftÃ-³. Point level control has only one moving part, resulting in no calibration and minimal maintenance. It has dust-ignition proof approval rating and can be used in hazardous environments. Switch eliminates bin overflow and can also be used to control levels in open piles.
Read More »
Steel Wire Selection Guide for Various Applications
Download this eBook to learn about how steel wire products can be used for a variety of applications.
Read More »
Separators remove particles down to 4 microns.
Series CLC Coalescers/Separators have 2-stage design that allows them to remove 99% of all liquid and solid particulate matter larger than 4 microns from air and gas streams. Units have no moving parts to fail or wear out. Applications include compressed refrigeration gases, evaporator overhead steam, high pressure gas at injection wells, fuel gas lines to engines in power and industrial plants,...
Read More »
Control Enclosures protect against accidental breakdown.
CN Series Increased Safety Control Enclosures house electrical equipment that will not generate arcs or sparks during normal operation. They also house equipment in which surface temperatures are controlled below incentive values. Able to resist impact, enclosures prevent possibility of excessive heat and ingress of water or dust. They are available in stainless steel 316L and 304 and polyester...
Read More »
Ethernet Switch shares enterprise-wide information.
Industrial Ethernet(TM) Switch includes five 10/100 Mbps 8-pin eurofastÃ-® ports to segment network traffic, extend Ethernet connection distance, and convert data packets between different transmission speeds. Switch complies with IEEE 802.3 10Base-T Ethernet and 802.3u 100Base/TX Fast Ethernet standards. Housing is rated NEMA 1, 3, 4, 12, 13, and IEC IP67 allowing switch to be installed in...
Read More »
Right-Angle Gearmotor operates quietly.
Model M1500 G4 PM dc gearmotor has metal construction and Bakelite gear that provides quiet operation for noise sensitive applications. It is available in 12 to 115 V models, with maximum continuous torque ratings to 7 lb-in. Motors are UL approved and have ceramic magnets, double-shielded ball bearings, Class F insulation, dynamic alloy balanced armature, TENV design, externally replaceable...
Read More »
Welding Generator provides high power.
Trailblazer Pro 350 D provides 20 to 350 A of dc Stick/TIG/MIG welding output and 12,000 W continuous, voltage-regulated 120/240 V single-phase generator power. For TIG welding aluminum, it has 35 to 250 ac output. Powered by 26 hp Kubota diesel engine, it has 100% duty cycle rating of 300 A at 32 V in ambient temperature of 104Ã-ºF. Generator features Arc Drive and Hot Start(TM) for Stick...
Read More »Motors comply 100% with NEMA Premium(TM) efficiency levels.
Totally enclosed, fan-cooled (TEFC) and open drip-proof (ODP) motors include 3-phase ODP motors rated at 1 to 250 hp and general purpose, 3-phase TEFC motors rated at 1 to 200 hp. Motors include UnimountÃ-®, Hostile DutyÃ-®, Corro-Duty, and 841 PLUSÃ-®. TEFC and ODP motors in 200 to 500 hp range are also available. Motors are inverter ready, resistant to power quality problems, and...
Read More »
Increase Workplace Safety, Manage Heavy Loads with Equipment from A-Plus Warehouse
A-Plus Warehouse carries a wide selection of commercial and industrial material handling equipment at affordable prices. Check out the video to learn more.
Read More »
