New Electrical Equipment & Systems Products

Miniature Step Motors provide near vibration-free operation.

Size 11, 2-phase, hybrid step motors include 3 models. Model 211-20-02 develops 16.6 oz-in. of holding torque in 1.99 in. long package. Models 211-13-02 and 211-18-02 are 1.25 and 1.75 in. long with holding torque values of 9.2 and 13.7 oz-in., respectively. Model 211-20-02 achieves torque and speed of 7.8 oz-in. at 10,000 half-steps per sec, or 8.6 W output with driver input of 24 Vdc and 1.3...

Photo Detector IC targets home entertainment market.

Model SP8055 is custom designed for audio/video recorder. It offers 8 high-speed data detection channels with 2 additional 140 MHz summing channels. Twelve gain settings provide functionality for DVD-R, DVD-RW, and DVD-RAM applications. Each setting is architected for specific media and speed combination. IC comes in clear, 16-pin 5.0 x 4.0 mm COB packaging and provides >60 dB PSRR,

Motors and Breakmotors have NEMA C-Face mounting.

NEMA C-Face Motors and Brakemotors incorporate one coupling mounted onto motor shaft and connected to speed reducer input shaft that transmits torque, resulting in damage-free motor removal. With Inverter/Vector Duty designs, products offer voltage spike resistance and double-coated, Class H magnetic wire insulation. At speed range of 5:1, units offer constant torque from 60-12 Hz, while units at...

Float Level Switch interfaces with remote devices.

Series LV30 high-temperature switch features dry contact closure for interface with PLC, SCADA, or alarm. Sensor mounts vertically inside tank on end of sealed pipe apparatus. Available in 3 shapes and sizes for pressures up to 750 psi, unit includes high temperature and pressure 316 SS float and stem, and 20 VA dry contact with selectable NO or NC state via float orientation. Switch accuracy is...

Confused About Which Screw Drive Style to Choose? Don't Lose Your Head!

This white paper outlines the different types of screw head and drive designs.

Decorator Switches provide smooth, quiet action.

Series 7500 Switches feature rocker design that provides users with firm feel and quiet action. Backwire clamps on side terminals provide easy installation using #12 or #14 wire. Rocker, top, and backbody are thermoplastic. Top and backbody are ultrasonically-welded to increase structural integrity. All switches are UL and cUL listed.

DC/DC Converters offer up to 94% efficiency.

E-class non-isolated, point-of-load converters feature power density of 247 W/inÃ-³. They are offered with 5, 10, or 15 A outputs and have no minimum load requirement. Used with 12 V nominal on-board bus source, units will operate from input voltage of 10-14 V. Open-frame, single-board converters employ synchronous buck topology, using fixed-frequency 300 kHz switching and ultra low...

Power Supply offers on-the-fly polarity reversal.

Model BP2592 Bipolar High Voltage Power Supply features 3 HV output connectors and output voltage softening resistors and does not arc when cable is unplugged from unit. Voltage programming is accomplished via panel mount potentiometer, and voltage metering is viewed via digital front panel display. General specifications include positive or negative polarity, Ã-

Instrument/Meter Enclosure suits hazardous locations.

UL Listed and CSA Certified, Model AGUB is made of copper-free cast aluminum with corrosion-resistant finish. Precision-threaded flame path is provided between box and cover. Large cover opening allows access to electrical devices and permits fast wire splicing and pulling. O-ring gasket seals out moisture, dust, oil, and dirt for interior and exterior locations. Cover is offered with sight glass...

Physical Layer Switch provides connectivity for test labs.

IntellaPatch 16 Physical Layer Switch is based on modular, single-slot design that allows use of various protocol and data-rate specific blades. It supports 1, 2, and 10 Gbps Fibre Channel; 10/100/1000/10 Gig Ethernet; and SONET OC-3, OC-12, and OC-48 by using either SFP or XFP transceivers. Layer-1 switch is suitable for system integrators and test engineers who need to manage configurations...

Switching Power Supply is UL508, TUV 60950 approved.

With output power levels from 75-240 W, DIN-rail mounted DR Series accepts universal input from 85-265 Vac. Eight models are available that provide single outputs of 12, 24, and 48 Vdc. Series offers integral EMI Class B filtering and is enclosed in metal casing. Offerings include integral power-good LED indicator and output adjustment potentiometer. Unit operates over temperatures from -10 to...