New Electrical Equipment & Systems Products

Shielded Cable increases signal isolation.

GUARDmark-6 Foil Twisted Pair (FTP) design increases signal isolation, preventing contaminant noise from entering cabling systems and disrupting network performance. Product has ETL verification to ANSI TIA-EIA 568-B.2-1 Category 6 standard and includes Premium Category 5e and standard Category 5e cables, all verified by ITS ETL SEMKO.

Decentral Motor Switch provides soft starts/stops of motors.

Mounted on the wall or directly to motor, DMS 300 is suited for soft starting and stopping of motor in either direction when no variable speed control is required. Housed in IP66/NEMA 4X enclosure, product is available with power range to 4 hp, 3-phase, 380-480 Vac. Dual part principle facilitates commissioning and service, while motor and cabling are protected by thermistor or built-in...

Power Relay Assembly offers 16 channels of switching signals.

Model 0000-6602 PXI High Current Relay Card consists of 16 Form A relays, each capable of switching 10 A of current, at 30 Vdc. Relays are controlled with simple functions to card, or pre-loaded list of switch states. Several trigger sources may be used to advance state list. Relay card follows PXI Specification for peripheral cards, adding trigger bus, local bus, star trigger, and reference...

Miniature Relay features Class F insulation.

Model WJ109F PC board relay is UL-certified at many loads including 12 A at 125 Vac/28 Vdc and 1/3 hp at 240 Vac. Unit is offered in 1 form A, 1 form B, and 1 form C contact configurations with choice of .36, .45, .50, and .80 W coils. Standard epoxy sealing is available for wave soldering.

Grips and Handles - Providing a Strong and Comfortable Grip

To learn more about the different types of Grip and Handle options available or which to select for your specific application, download our product guide.

IP65 Servomotors use metal twist-on connectors.

Available in NEMA frame sizes 17, 23, and 34, servos are equipped with power connectors and signal/communications connectors. Offered with straight and right angle cord-sets, units employ SilverMaxÃ-® motion system, which combines motor, controller, driver, and encoder to create integrated servomotor. Users can program applications requiring electronic clutch, electronic gearing/caming,...

Flexible Control Cables suit confined areas.

L-FLEXX 290 Cables snake through tight curves during installation. Finely stranded bare copper conductors, combined with talc lubricant dispersed between conductors, allow for tight bend radius. Rated for 600 V/90Ã-

Ring Terminals fit 1/2 in. studs.

PAN-TERM Ring Terminals are offered in nylon, vinyl, and non-insulated models. Brazed seam creates solid barrel, which assures high mechanical and electrical performance in non-insulated and vinyl series. Funnel entry insulation speeds wire insertion and helps eliminate turned back strands in vinyl Series. Color-coded insulation sleeve identifies wire range and provides quick visual...

DC To AC Inverter powers large LCD modules.

Series MS provides up to 45 W of output power for backlighting of LCDs 20 in. diagonal and larger in size that are powered by 6 CCFLs. Product offer multiple, fully encapsulated transformers that ensure CCFL ignition and prevent cross-talk. By separating lamps in each CCFL cluster, inverter keeps them from interacting and prevents current from jumping from lamp to lamp. Series offers on-board...

LED Driver integrates Schottky diode on-chip.

Model LT3465 consists of switching, constant current, white LED driver in ThinSOT(TM) package. Capable of driving up to 6 white LEDs from one Li-Ion cell, it offers efficiencies to 81% and switches at 1.2 MHz. Unit provides constant frequency PWM operation and delivers same current to each LED, regardless of variations in forward voltage drop. It offers output voltage limiting, one-pin dimming...

Mounting System accommodates up to 6 displays.

Modular SWM systems of mounting frames and brackets mount multiple monitors on any desktop, tabletop, or wall. Vertical posts on 2-track SWM 0602 frame are 23.7 in. high. Posts on single-track SWM 0421 frame are 16.6 in. high. Horizontal tracks on both frames are 39.4 in. long. Vertical positions of tracks are continuously adjustable on both frames. Three pivoting mounting brackets attach with...

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.