New Electrical Equipment & Systems Products

Sleeves, Nuts, and Ferrules can hold 5,000 psi.

Silica SealTight(TM) sleeves, nuts, and ferrules solve problem of connecting capillary tubing to standard 10-32 coned ports intended for 1/16 in. OD tubing. TeflonÃ-® FEP sleeves plus PEEK(TM) NanoTight(TM) nuts, and TefzelÃ-® ferrules provide sealing and can be finger tightened to hold 5,000 psi. Twelve color-coded IDs accommodate capillary ODs from 70 Ã-µm to 1 mm.

Step Motor offers holding torque to 30 oz-in.

Available in 1.10, 1.38, and 1.54 in. lengths, 0.9Ã-º NEMA size 17 High Accuracy motor is capable of holding torque ranges from 12-30 oz-in., depending on length of motor. Product has low inertia, between 0.07-0.13 oz-in.Ã-², and is available with unipolar and bipolar windings. Motor is suited for microstepping control and wherever accuracy is critical, as in automation, medical, and...

Deduster suits small/mid-sized plastic product manufacturers.

Model P5 dust contaminant removal system cleans regrind and virgin materials that have been mixed together. Agitator controls material flow, and flux field generator produces low-power electromagnetic field, disrupting electrostatic bond between pellet and dust particles. With capacity of 500 lb/hr, Model P5 removes dust particles down to 100 microns. By separating plastic pellets from dust...

Interface Controller simplifies powered device design.

Model LTC4257 Power over Ethernet Interface Controller incorporates circuitry necessary to connect powered device to IEEE 802.3af powered Ethernet network. Offered in SO-8 package, -48V powered unit incorporates 25 k signature resistance, programmable classification, power switching, inrush current limiting, and fault protection. Integrated 100 V power MOSFET keeps PD circuitry disconnected from...

A Complete Guide to Aerospace Metal Fabrication eBook

Check out this eBook to learn all about aerospace metal fabrication - materials, processes, and applications.

Terminal Block offers easy installation.

UL and CSA Listed, 7.62 mm Type AST128 SPRINGCONÃ-® terminal block ships wire-ready and provides gas tight connection. Product offers constant contact resistance and auto adjustment of spring force at each wire size and is designed to meet VDE requirements. Available in circuit sizes from 2-24 poles, unit accepts wire range from 12-28 AWG and is rated to 300 V @ 15 A.

Bus Bar System distributes power up to 200 A at 600 V.

Smissline adds no height or width and eliminates 50% of power wiring. DIN rail components mount with click and base-mounted components mount with screws. Single-phase devices can be mounted adjacent to multi-phase devices on same system. Smissline system offers 6-100 poles and employs finger safe design. It is UL and IEC approved.

Lighting System and Fixtures suit varied applications.

Low Voltage Monorail System can be custom designed with curves to negotiate corners on ceilings and walls. Monorail, which is flexible in field, bends for visual impact in various installations. QuickConnect Series consists of ceiling canopies, components, and accessories that allow pendants and fixtures to be utilized as monopoints and multipoints. Pendants include shades crafted of mouthblown...

Electronic Load tests power sources in diverse applications.

Bench top Model UPEL-2500 electronic load simulator is based on high-speed current transformer providing feedback to lateral MOSFETs. Average power rating is 2,500 W and maximum rating is 4,000 W. Unit features voltage range from 1-200 V peak to peak and current up to 100 A. Internal generator allows dynamic testing of many power sources. Dynamic loading capability is up to 1 KHz in ac/dc mode...

Keylock Switches have vertically rotating switching mechanism.

Available in flat or tubular key styles, panel-mount CK Series switches are offered in 19 and 16 mm dia bushing options and offer 4- and 5-tumbler locking mechanisms, resp. Products also employ self-cleaning, sliding contacts and dielectric strength of 1,500 V between contacts and case. Rated 3 A @ 250 Vac, series is available in single pole, 2- and 3-position models with respective 90Ã-

Slotted DC Brushless Motors produce up to 75 oz-in. torque.

With 2.3 in. dia and 6-slot lamination design, ELCOM STÃ-® motors feature internal Hall sensor feedback and variable speed control. Products are available in Ã-½, 1, 1Ã-½, and 2 in stack lengths and utilize neodymium-iron-boron magnets. Motors achieve speeds up to 8,000 rpm and continuous torque output up to 49 oz-in or 75 oz-in. with heat sink. Mounting configuration is consistent...

Optimize Your Workforce with Weavix™ by PK Industrial

The Weavix™ platform takes productivity, quality, and visibility to a new level by providing better communication and real-time KPIs. Check out the video to learn more!