Current-Mode Controllers suit 10-250 W power supplies.
Series SiP280x PWM Controllers serve as building blocks for converters in offline and dc-to-dc current-mode switching power supplies. Operating from 5 V with start-up and operating currents of 100 and 500 Ã-µA, respectively, controllers offer switching frequencies up to 1 MHz. They include internal soft-start mechanism and blanking function, which eliminates need for external filter...
Read More »
Separation System makes old coolant usable.
Chiperator(TM) Chip and Coolant Separation System vacuums and filters old cutting fluids loaded with chips out of machine tool sumps into 55-gal drum. It separates chips from coolant and returns clean, filtered coolant to machine sump. Air-driven system with venturi design has no moving parts and strains 40 gal of chips and coolant/minute. Float valve shuts off unit when drum is full, and...
Read More »Conveyor Belt suits limited space applications.
Available in the FDA-conforming polypropylene and polyacetal, HabasitLINKÃ-® M3843 Tight Radius 1.5 in. Belt minimizes both polygon effect endemic to modular belts and size gap between adjacent conveyors. With collapse factor of 1.6, side-flexing belt allows extreme tight turns. T-bar design of individual module's cross rib imparts high lateral stiffness. With open area of 37% and open...
Read More »
Power Module comes in 12 x 10 mm package.
Plug-in, point-of-load, Model PTH04070W supports up to 3 A output current and eliminates need for heat sink, providing up to 94% efficiency. Operating from 3.3 or 5 V input bus, module leverages switch-mode dc/dc topology to convert 5 V input down to 0.9 V with less than 1 W of power dissipation. Power density is 160 W/inÃ-³, and output voltage is adjustable from 0.9-3.6 V using external...
Read More »
Understanding Water Hammer
DFT Inc's engineers have been working with professionals in a range of industries for decades, helping to identify and resolve the underlying causes of water hammer. In this eBook you will learn about many of these common causes, how they impact your system and some of the basic changes you can make to eliminate them. In this eBook you will learn: What causes water hammer and why it is such a persistent problem. The role design plays in reducing the risk water hammer poses to your system. DFT's professional recommendations for coping with water hammer.
Read More »
SC Connectors optimize performance on 1.6-2.0 mm cable.
Singlemode SC Connectors have been tested to Telcordia GR-326, Issue 3; Service Life-Part A, using standard match-cladding fiber. They incorporate 6-position tuning feature, which optimizes fiber alignment and performance.
Read More »
Universal Power Supply drives non-linear load on output.
MIL-qualified, fully isolated power converter, PCS-5000, employs solid-state switching and control algorithms to provide max output waveform fidelity with minimal harmonics and distortion on output. Capable of functioning as frequency converter, load isolator, and ac/ac or ac/dc power supply, it appears to line as resistive load with unity power factor and harmonics. Rack-mountable product...
Read More »
Smart Card Interface IC carries NDS approval.
Suited for applications requiring compliance with ISO-7816-3 and EMV4.1 standards, 73S8024RN has LDO architecture that allows IC to provide card with up to 90 mA minimum. Product, available in SO28 and QFN32 packages, can be used in conjunction with any host microcontroller and utilizes LDO voltage regulator. IC is suited for use with VideoGuardÃ-® Conditional Access solution in...
Read More »
Ethernet Switch suits space sensitive applications.
DIN-rail-mount, 10/100 Base-TX DIOSWITCH MINI is 22.5 mm wide with 6 ports, 2 of which are pluggable clamps. Unit features IP20-rated plastic housing and all Ethernet functions, including auto-negotiation, auto-crossing, and auto-polarity. Three-pin pluggable spring cage terminal for power supply is rated 19.2-30 V with max ripple of 10%. Diagnostic indicators are provided on front panel. Switch...
Read More »
Step Down Converter provides max output current of 1.8 A.
Containing control IC, main switch MOSFET, and fly wheel SBD on single chip, Model MD1323R features input range of 8-30 V and adjustable output voltage of 2.5-12 V. Unit includes remote on/off, overcurrent protection, and built-in thermal protection. Flexible nature of converter allows designer to customize product to fit needs of application.
Read More »
Neagle Choice, LLC Announces New Available Services
Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.
Read More »
