Video Inspection System is designed for steel mills.
Available as single- or double-sided remote inspection system, Q-EYE enables one inspector to spot defects as small as 0.04 in. across 60 in. wide strip at speeds to 4,400 fpm in real time. Menu-driven software enables unit to be programmed for video capture, storage, and replay. System uses Unilux inspection lights and two 8-bit black and white cameras with video resolution of 1,392 x 1,040...
Read More »
Milling Tools rough complex profiles in hard materials.
To cope with impact forces and heat generated when roughing, 5505VX twin edge, indexable carbide insert tools have variable edge condition and feature 0.05 mm tolerance on rotation of tool axis. Helical ground form permits elevated spindle speeds and feed rates. Grade choices include SC3025 for machining cast and nodular irons, and X400 for cutting hardened steels from 52-56 HRC. Tools are...
Read More »
Abrasive Grinding Wheels promote weld integrity.
Sigma Green Grinding Wheels provide metal removal on stainless steel, inconel, titanium, and other highly alloyed materials. Virtually contaminant-free, units contain only 0.035% iron and less than 0.1% of iron, chlorine, and sulfur combined. Featuring zirconia-ceramic grain and bonding that helps prevent corrosion, wheels grind out cracks and blend butt-, pad-, fillet-, and window welds. Sizes...
Read More »
Development Kit works with high-voltage DACs.
HVDAC DevKit, model UVK-HVDAC200-4, provides plug-and-play platform for evaluation and prototype development using HVDAC200-4 quad, 9-bit, serially configurable voltage/current DAC with outputs of up to 200 V. Kit comes with WindowsÃ-®-based demo program and consists of Goal VERSA MIX 8051 MCU, onboard voltage reference, and 2 adjustment potentiometers. Kit also offers over-temperature and...
Read More »
Quick Guide to Components for Medical Furniture
When designing for a hospital environment, it is essential to consider the small components that enable your application to perform to a high level. Hospital furniture has different users, so it's not only patients you need to think about, but also caregivers.
Read More »
Electrostatic Voltmeter features non-contact design.
Built to measure and monitor electrostatic charge, Model 400 incorporates vibrating reed probe sensor and noise null control potentiometer. It can be used with single chopper probe or dual chopper probe, which provides response time of less than 200 Ã-µsec for 1 kV step response with zero phase lag. There is no overshoot or undershoot when measuring step voltage changes, and measurement...
Read More »
Glass B/A Ionization Gauge has spring supported filament.
Designed for accurate measurement over range of 2x10-10-1x10-3 torr, Bayard Alpert Ionization Gauge has universal design that enables use with other B/A controllers. Spring supported filament reduces any variation in filament to grid spacing to deliver uniform output over variations in temperature, age, and orientation. Thoria- or yttria-coated iridium filament minimizes burnout.
Read More »
Sorter separates out improperly hardened parts.
Combining eddy current technology with custom fixturing, Sorter provides 100% on-line inspection and sorting of small metal parts. Zetec MIZ23 eddy current tester compares electromagnetic properties of sample with results obtained from testing known good parts. Input/output of Zetec MIZ23 operates flippers on sorter according to test results, which divert defective parts to reject bin. Accuracy...
Read More »
Ultrasonic Inspection System checks aircraft engine forgings.
Compliant with GEAE specifications, LogiQ9i can drive up to 1,024 element probe and can accommodate 4 phased array probes, with only 1 active at any time. System uses 10 MHz linear probe with 768 pairs of elements, which can be scanned and focused electronically. Data is displayed in B-scan format on instrument, and is stored on imaging package computer hard drive in files of up to 100 Mb for...
Read More »
Crane Scale utilizes 12 V rechargeable SLA battery.
Electronic Porta-Weigh Plus MSI-4300 includes 6-digit, 1.6 in. high, alphanumeric LCD with LED backlighting and sealed lead acid battery that provides up to 300 hours of operation between charges. Available in 9 standard capacities from 500-100,000 lb, scale includes digital calibration and self-diagnostic circuitry. It is available with infrared remote controller, RS-232 and relay output...
Read More »
Ultrasonic Bolt Meter provides measurement stability.
USM-2 Ultrasonic Bolt Meter with operating software v1.6 provides precise measurement of elongation and load in threaded fasteners from 1 in. to 50 ft long made of any metal material. Field-portable unit features onboard flash memory that stores up to 5 elongation and load measurements for each bolt to verify multiple pass tightening procedures. Integral data recorder stores bolt information and...
Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.
Read More »
