Wire Stripping Module retrofits to crimping machines.
Wire stripping module, via microprocessor controller, can operate as stripping machine, crimping machine, or stripper-crimper. Stripper module works with end and side feed heavy-duty mini applicators suitable for 32 to 14 AWG wire. Stripping blades are titanium nitride coated, and wire slugs are air-ejected to collection trays. Strip length is adjustable from 0.100 in. to 0.400 in. Module...Read More »
One-Handed Clamp uses self-restraining technology..
Adelok-® helps assemble clamped components by holding itself closed and in place during installation. It is suitable for rapid clamp assembly and improved stacking methods for fluid lines and hoses, wire bundles, power cables and fire detection sense lines. Juggling of fasteners, standoffs, washers, ties and grommets is eliminated. Clamp can handle payloads of 0.062 to 3.50 in., and can be...Read More »
Screw Inserter installs small screws in metal or plastic.
Stickscrew-® works with StickShooter driver for accurate small-screw insertion. System eliminates loose screws by using sticks of up to 110 serially connected hex-head screws in sizes ranging from #0-80 to #8-32 and M2 to M3. Sticks are placed in driver and install and twist off cleanly when precise seating torque is reached. It works with machine, thread-forming, and thread-cutting screws in...Read More »
Machining Vise fits CNC machining centers.
Magnum vises are available as 6-in machining vises, 6-in. Double Mag vise, and 5 in. Mini Mags. All bed heights are heat treated and ground to -Read More »
Distillation 101: A Guide to Distillation and Separation Technologies
Distillation is a separation unit operation that involves multiple countercurrent-stage steps, separating two or more volatile components. This results in the contact of liquid and vapor most generally in counterflow. Distillation 101: A Guide to Distillation and Separation Technologies provides an in-depth look at everything you need to know about distillation, including: Design procedures Equipment components ApplicationsRead More »
Adjustable Screwdriver eliminates overtorquing.
Adjustable torque manual screwdriver lets operator dial in torques from 20 oz-in to 40 ft-lb. via twist action. Slip clutch prevents over-torquing, and driver automatically resets for next fastener after torque is reached. 3 models are available: 20-100 oz-in, 3-15 ft-lb, and 5-40 ft-lb. Preset manual torque drivers are also available. All manual drivers are calibrated to meet/exceed accuracy and...Read More »
Hammer-Drill Kit drills concrete, steel, and plastics.
Model 5371-21 double insulated, 1/2 in., dual-torque Magnum-® Hammer-Drill Kit features metal gear housings. Its 5.5 amp motor and dual-torque gearbox provide high-speed drilling (0-2500 rpm) with smaller bits, and ample torque for larger bits in low-speed range setting (0-1000 rpm). Hammer-Drill also features variable speed switch with reverse and selector for hammer with rotation, and rotation...Read More »
Chamfer Drills are made of solid carbide
SD10, SD20 and SD25 Super Alloy geometry chamfer drills and intermediate and semi-standard solid drills are available with diameters from 3mm to 18mm. All drills are TiAIN coated, with an outer layer of TiN. They are self-centering, provide excellent chip control in most materials, and are suitable for use in unmanned machining. Drills have large back taper and conical-shaped front point for...Read More »
Wire Stripper Prefeed speeds up stripping process.
Belt-driven Model 6815-05/06 improves wire strip-length accuracy and extends life of wire strippers by reducing load pressures, thus preventing jamming and excessive strain on equipment and materials. It delivers any length wire to any make of wire processing machine, provides power to rotate maximum weight reels or pull wire from a barrel, and has provision for mounting 2 reels for cutting and...Read More »
Impact Wrench is pneumatically powered.
Model 7560 comes in 4 anvil configurations: 3/4 in. with socket ring retainer; 3/4 in. with through socket retainer; 1 in. square drive with through hold; and #4 spline anvil with button retainer. Torque output rating is 1,025 ft-lb. Grip handle has been improved.Read More »
Wire Stripper suits electronic/electrical applications.
Small Gauge Wire Stripper is designed to cut and strip solid or stranded #16-30 AWG wire. 7 stripping stations perform clean strips without damaging conductors or tearing insulation. Its built-in looping hole is suitable for shaping wire to attach on screw terminals. Serrated pliers nose allows users to grip, pull and twist wire. Cushion grip handles are ergonomically designed for comfort, and...Read More »
Let Our Safety Experts Lower Your Risk
Elite Technical Services provides your company with qualified and experienced safety experts. Specializing in confined space and high-angle technical rescue and jobsite hazard assessment, your workplace safety is the top priority. Check out the video to learn more.Read More »