Tin Snips cut stainless steel and other metals.
Snipping Cutters

Tin Snips cut stainless steel and other metals.

IDEAL Aviation Tin Snips, featuring black-oxidized chrome-moly steel forged blades, meet ANSI and DNI standards. They are available in straight, left, and right cutting designs, and feature hardened and serrated cutting edges that enable stable hold when cutting. Snips include secure safety latch with quick opening/closing design, plus dual-durometer grips that offer comfort and non-slip gripping...

Read More »
Saws

Saws feature manual vise with quick release.

Model 220 and 270 saws have 2-speed direct-drive gear box and no belts or pulleys for more efficient operation. 220 and 270 come in 2 and 2.5 hp, respectively, with blade sizes of 96-1/2 x 1 in. and 115 x 1 in., and blade speeds of 118 to 236 fpm. Steel-fabricated base reduces vibration and is low-profile. Saws feature CE-Certified electronics and blade-door interlocks for operator and machine...

Read More »
Ratchet Tool crimps and embosses connectors.
Tools

Ratchet Tool crimps and embosses connectors.

Y1MR Hytool has 4 color-coded die grooves and accommodates No. 8 to No. 1 copper lugs and splices as well as copper C-Tap connectors. In addition to standard red, blue and grey grooves, it has combination brown/green die groove, which can be used for standard brown applications and crimping green YAICL-type connector with No. 1 AWG or No. 2 Flex Cu conductor. Die will emboss connector with brown...

Read More »
Wire Stripping Module retrofits to crimping machines.
Wire Strippers

Wire Stripping Module retrofits to crimping machines.

Wire stripping module, via microprocessor controller, can operate as stripping machine, crimping machine, or stripper-crimper. Stripper module works with end and side feed heavy-duty mini applicators suitable for 32 to 14 AWG wire. Stripping blades are titanium nitride coated, and wire slugs are air-ejected to collection trays. Strip length is adjustable from 0.100 in. to 0.400 in. Module...

Read More »
One-Handed Clamp uses self-restraining technology..
Clamps

One-Handed Clamp uses self-restraining technology..

Adelok® helps assemble clamped components by holding itself closed and in place during installation. It is suitable for rapid clamp assembly and improved stacking methods for fluid lines and hoses, wire bundles, power cables and fire detection sense lines. Juggling of fasteners, standoffs, washers, ties and grommets is eliminated. Clamp can handle payloads of 0.062 to 3.50 in., and can be...

Read More »
Screw Inserter installs small screws in metal or plastic.
Fastener Drivers

Screw Inserter installs small screws in metal or plastic.

Stickscrew® works with StickShooter driver for accurate small-screw insertion. System eliminates loose screws by using sticks of up to 110 serially connected hex-head screws in sizes ranging from #0-80 to #8-32 and M2 to M3. Sticks are placed in driver and install and twist off cleanly when precise seating torque is reached. It works with machine, thread-forming, and thread-cutting screws...

Read More »
Machining Vise fits CNC machining centers.
Vises

Machining Vise fits CNC machining centers.

Magnum vises are available as 6-in machining vises, 6-in. Double Mag vise, and 5 in. Mini Mags. All bed heights are heat treated and ground to ±0.0005 in. Jaw plates will fit onto company's vise without any additional machining. Mini Mag allows additional workstation to be added onto 40 in. CNC bed.

Read More »
Adjustable Screwdriver eliminates overtorquing.
Screwdrivers

Adjustable Screwdriver eliminates overtorquing.

Adjustable torque manual screwdriver lets operator dial in torques from 20 oz-in to 40 ft-lb. via twist action. Slip clutch prevents over-torquing, and driver automatically resets for next fastener after torque is reached. 3 models are available: 20-100 oz-in, 3-15 ft-lb, and 5-40 ft-lb. Preset manual torque drivers are also available. All manual drivers are calibrated to meet/exceed accuracy and...

Read More »
Hammer-Drill Kit drills concrete, steel, and plastics.
Hand Held Drills

Hammer-Drill Kit drills concrete, steel, and plastics.

Model 5371-21 double insulated, 1/2 in., dual-torque Magnum® Hammer-Drill Kit features metal gear housings. Its 5.5 amp motor and dual-torque gearbox provide high-speed drilling (0-2500 rpm) with smaller bits, and ample torque for larger bits in low-speed range setting (0-1000 rpm). Hammer-Drill also features variable speed switch with reverse and selector for hammer with rotation, and...

Read More »
Chamfer Drills are made of solid carbide
Drills

Chamfer Drills are made of solid carbide

SD10, SD20 and SD25 Super Alloy geometry chamfer drills and intermediate and semi-standard solid drills are available with diameters from 3mm to 18mm. All drills are TiAIN coated, with an outer layer of TiN. They are self-centering, provide excellent chip control in most materials, and are suitable for use in unmanned machining. Drills have large back taper and conical-shaped front point for...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers