Cleanout Saws help repair cracked floors.
Crack chasing and joint cleanout saws rout out random cracks and joints prior to use of repair compound. All concrete cuts can be made with either hand held or walk-behind saws. Crac-Vac routs out random cracks to depth of 1-1/4 in., and can be used for straight-line joint cleanout work. Cutting to 1-1/2 in., walk-behind CC-100 crack chaser cuts up to 8 ft of crack/min. Cut-Vac cuts to 2-1/2 in....
Read More »
Joint Cleanout Saws have dust free operation.
JS-90 and JS-110 walk-behind cutting saws have upcut rotation, which enables dust extraction and allows quick connection to dust collection system. Using dry diamond blades, both saws cut to maximum depth of 3 in. and clean joints at rate of 20 to 60 ft/min. Saws allow for simultaneous use of 2 blades for spalled joint repairs. JS-90 has 9-hp Honda gas engine, and weighs 160 lbs; JS-110 weighs...
Read More »
Band Saw Blade eliminates tooth strippage.
Lenox Rx®+ bi-metal blade, with rigid isophonic tooth design, minimizes harmonics during cutting to reduce noise levels. It improves cutting performance on structural steel, I-beam, angle iron, channel iron, tubing, pipe, wide flange beams and nested bundles. Blade is also available in extra heavy set to avoid blade pinching.
Read More »Charge Erasure Tool eliminates electrical charge build-up.
RapidErase(TM) UV-based system, based on company's 200 and 300 mm photostabilization platforms, gives chipmakers high-throughput process for bringing voltage levels back in line, both in front- and back-end-of-line environments as well as in post-manufacture probe and test area. It incorporates microwave-driven UV source and precisely controlled thermal energies that result in high-throughput,...
Read More »
Metal Finishing Selection Guide
This unique chart compares different metal finishes by cost, corrosion resistance, applications and more.
Read More »
Machine combines shearing, press-braking, and rolling.
TRI-FAB Model 52P features shearing and rolling capacity of 52 in. x 12 ga mild steel and press braking capacities of 12 ga at 36 in. and 14 ga at 52 in. Machine will cut stainless steel up to 0.072 in. Rotating shafts are journalled in bronze bearings, and shear blades are Grade T10 tool steel. Manually-operated back gauge is standard, and can be positioned for use with shear or press brake as...
Read More »
Impact Socket Sets offer access and versatility.
3/8 in. Drive Semi-Deep Impact Socket Sets come in both metric and fractional sizes. Semi-deep sockets incorporate deeper broach depth than standard length sockets, and utilize fully tapered, nose down design. Both sets come packaged on metal rails. Ten piece fractional set (#4060) includes sizes from 5/16 to 7/8 in., and 12 piece metric set (#4080) includes sizes from 8 to 19 mm. All impact...
Read More »
Coaxial Cable Stripper suits utility applications.
GS-59 cuts and strips RG-59 and RG-6 coaxial cable. Hexagon shaped stripping station strips outer jacket and 18-gauge stripping station strips center conductor. Hexagon shaped connector station helps push F connectors onto coaxial cable. Curved cutting blade ensures wire will not slip while cutting. Spring-return action reduces hand fatigue.
Read More »
Non-Metallic Wire Stripper was developed by engineers.
Dual NM (non-metallic) T-Stripper is designed to cut and strip 12/2 and 14/2 NM cable. Based on IDEAL's Reflex design, it features textured grips, bolt cutting, locking hasp, and pliers nose. Job-specific NM strippers are available for 12/2, 14/2, 12, 14, and UF cable.
Read More »
Caulk and Adhesive Gun is built on a T-handle platform.
Model 6560 cordless 12-volt gun pushes out high viscosity urethanes, caulks and adhesives. Microprocessor-controlled flow control switch provides precise beads, while drip protection feature briefly reverses motor when trigger is released to help keep work area clean. Trigger lock-off prevents tool from accidentally being turned on. Model 6560 is made of Zytel® nylon, and will not bend,...
Read More »
Ratcheting Screwdrivers have smooth gear mechanism.
Ratcheting Screwdrivers, available with T-shaped and standard handles, feature 3-way ratchet mechanism with forward, lock, and reverse positions. T-handle maximizes torque, and is available with shanks in lengths of 2, 3-7/8, or 7-7/8 in. long with magnetic tip to hold bits. WRS-1 standard handle comes with 3/16 and 1/4 in. slotted, No. 1 and No. 2 Phillips, and T-15 Torx tips stored within...
Read More »
Micro Air's Dust, Fume, Mist Collection Equipment Facilitate a Safe Work Environment
Dust, fume, and mist collectors from Micro Air promote a safer, more productive work environment. Our wide array of products are available to the industrial manufacturing sector for processes such as welding, cutting, grinding, blasting, and more. Check out our video to learn more.
Read More »
