One-Handed Clamp uses self-restraining technology..
Clamps

One-Handed Clamp uses self-restraining technology..

Adelok® helps assemble clamped components by holding itself closed and in place during installation. It is suitable for rapid clamp assembly and improved stacking methods for fluid lines and hoses, wire bundles, power cables and fire detection sense lines. Juggling of fasteners, standoffs, washers, ties and grommets is eliminated. Clamp can handle payloads of 0.062 to 3.50 in., and can be...

Read More »
Screw Inserter installs small screws in metal or plastic.
Fastener Drivers

Screw Inserter installs small screws in metal or plastic.

Stickscrew® works with StickShooter driver for accurate small-screw insertion. System eliminates loose screws by using sticks of up to 110 serially connected hex-head screws in sizes ranging from #0-80 to #8-32 and M2 to M3. Sticks are placed in driver and install and twist off cleanly when precise seating torque is reached. It works with machine, thread-forming, and thread-cutting screws...

Read More »
Machining Vise fits CNC machining centers.
Vises

Machining Vise fits CNC machining centers.

Magnum vises are available as 6-in machining vises, 6-in. Double Mag vise, and 5 in. Mini Mags. All bed heights are heat treated and ground to ±0.0005 in. Jaw plates will fit onto company's vise without any additional machining. Mini Mag allows additional workstation to be added onto 40 in. CNC bed.

Read More »
Adjustable Screwdriver eliminates overtorquing.
Screwdrivers

Adjustable Screwdriver eliminates overtorquing.

Adjustable torque manual screwdriver lets operator dial in torques from 20 oz-in to 40 ft-lb. via twist action. Slip clutch prevents over-torquing, and driver automatically resets for next fastener after torque is reached. 3 models are available: 20-100 oz-in, 3-15 ft-lb, and 5-40 ft-lb. Preset manual torque drivers are also available. All manual drivers are calibrated to meet/exceed accuracy and...

Read More »
Hammer-Drill Kit drills concrete, steel, and plastics.
Hand Held Drills

Hammer-Drill Kit drills concrete, steel, and plastics.

Model 5371-21 double insulated, 1/2 in., dual-torque Magnum® Hammer-Drill Kit features metal gear housings. Its 5.5 amp motor and dual-torque gearbox provide high-speed drilling (0-2500 rpm) with smaller bits, and ample torque for larger bits in low-speed range setting (0-1000 rpm). Hammer-Drill also features variable speed switch with reverse and selector for hammer with rotation, and...

Read More »
Chamfer Drills are made of solid carbide
Drills

Chamfer Drills are made of solid carbide

SD10, SD20 and SD25 Super Alloy geometry chamfer drills and intermediate and semi-standard solid drills are available with diameters from 3mm to 18mm. All drills are TiAIN coated, with an outer layer of TiN. They are self-centering, provide excellent chip control in most materials, and are suitable for use in unmanned machining. Drills have large back taper and conical-shaped front point for...

Read More »
Wire Stripper Prefeed speeds up stripping process.
Wire Strippers

Wire Stripper Prefeed speeds up stripping process.

Belt-driven Model 6815-05/06 improves wire strip-length accuracy and extends life of wire strippers by reducing load pressures, thus preventing jamming and excessive strain on equipment and materials. It delivers any length wire to any make of wire processing machine, provides power to rotate maximum weight reels or pull wire from a barrel, and has provision for mounting 2 reels for cutting and...

Read More »
Impact Wrench is pneumatically powered.
Wrenches

Impact Wrench is pneumatically powered.

Model 7560 comes in 4 anvil configurations: 3/4 in. with socket ring retainer; 3/4 in. with through socket retainer; 1 in. square drive with through hold; and #4 spline anvil with button retainer. Torque output rating is 1,025 ft-lb. Grip handle has been improved.

Read More »
Wire Stripper suits electronic/electrical applications.
Wire Strippers

Wire Stripper suits electronic/electrical applications.

Small Gauge Wire Stripper is designed to cut and strip solid or stranded #16-30 AWG wire. 7 stripping stations perform clean strips without damaging conductors or tearing insulation. Its built-in looping hole is suitable for shaping wire to attach on screw terminals. Serrated pliers nose allows users to grip, pull and twist wire. Cushion grip handles are ergonomically designed for comfort, and...

Read More »
Holesaws come in industrial and self-service packaging.
Blades

Holesaws come in industrial and self-service packaging.

BAHCO Holesaws include bi-metal holesaws and carbide-tipped saws. Bi-metal holesaws feature plastic tooth-guards, which pull out and provide pictograms and instructions, including saw dimensions, appropriate arbor sizes and recommended rpm for specific materials. Bi-metal and carbide-tipped holesaws are available in sizes ranging from 9/16 to 6 in. in diameter. Packaging features bar codes,...

Read More »

All Topics