Tool Kits

Plastic-Welding Tool Kits are custom assembled.

Malcom Heat Gun Kits(TM) feature Leister-G Heat Gun, which is fully adjustable from 70 to 1,250°F over 1-20 cfm range, as well as tools, tips, and 2 lb of PVC, PP, PE, PC, LDPE, and ABS welding rod. Users provide information online and select tools and tips for application from recommended items. Resulting custom-built kit can include items such as speed welding tip, rotary burr, side...

Read More »
Tool Kit helps user install and repair VoIP systems.
Tool Kits

Tool Kit helps user install and repair VoIP systems.

VoIP Installer's Tool Kit includes connector crimping pliers, tone and probe kit for tracing lines, telephone test set, and impact tool with 2 reversible 66/110 blades. All tools fit into 19 x 16 x 12 in. tote bag featuring 14 outside pockets to store tools, as well as built-in compartment with parts box, allowing storage of connectors, tapes, ties, and other accessories. Also included in kit are...

Read More »
Rivet Strips speed conveyor belt splicing.
Rivet Sets

Rivet Strips speed conveyor belt splicing.

Flexco® Rapid Loader(TM) Collated Rivet Strips facilitate installation of Flexco SR(TM) Rivet-Hinged and BR(TM) Butt-Rivet conveyor belt fasteners. Plastic strips hold 4 sets of 5 rivets in pattern required for SR/BR installation. Each block of 20 rivets, which installs 4 adjacent fasteners, loads in approximately 7 seconds. Strips are color-coded to assure correct rivet size selection for...

Read More »
Rotary Hammer produces 0-4,600 blows per minute.
Electric Hammers

Rotary Hammer produces 0-4,600 blows per minute.

D-handle Rotary Hammer, Model BHE-D24 incorporates Variospeed electronic speed control, reverse feature for drilling, and die cast aluminum gearbox that allows rapid heat dissipation. Winding protection grid deflects airborne debris away from armature winding. Large knob lets operator change from percussion with rotation drilling to rotation only. With 5.6 A motor, drilling capacity is up to 1...

Read More »
Grippers

Grippers are available with strokes from 3.14-15.75 in.

Featuring T-slotted jaw design, GH6 Series Long Stroke Parallel Grippers include T-slot jaw guide that is fully supported along entire jaw travel. Jaw synchronicity is ensured via rack and pinion drive, while 2 cylinders that power jaws are connected through internal porting. Main air ports are located on side, and alternate ports on bottom allow connection to manifold plate. Grippers are...

Read More »
Blades

Band Saw Blades handle highly abrasive cutting jobs.

Series HRc features micro-grained heat- and wear-resistant carbide teeth that are applied using carbide weld process, which helps prevent teeth from breaking off and becoming lodged in workpiece. Reinforced design provides resistance to tooth strippage and allows for penetration in difficult applications. Available in 1 x .035, 1Â-¼ x .042, 1½ x .050, and 2 x .063 in., blades are...

Read More »
End Prep Tool removes membrane and machines tube.
Machinery

End Prep Tool removes membrane and machines tube.

Wart Membrane Removal Head for the Wart MILLHOG® right angle welding end prep tool machines membrane from between clad tubes, simultaneously removes overlay, and puts finished end prep on tube. Head features multiple carbide bits with 4 cutting edges each and is designed to perform 37Â-½Ã‚° and J preps, flat face, and bore clad tubing. Tool requires min 2 5/8 in. radial clearance...

Read More »
Laser Cutting Machine achieves rapid acceleration rates.
Cutters and Cutting Machinery

Laser Cutting Machine achieves rapid acceleration rates.

Model TC L 3030 Plus 5 x 10 ft flatsheet laser cutter integrates Plus axis technology, allowing machine to accelerate at rates up to 1.5 g. Included software automatically evaluates geometry of each part and optimizes job process for efficiency. Machine features Nitrojet high-pressure cutting, Advanced Process Control, and laser resonator with frictionless turbine. Laser is available in power...

Read More »
Wrench removes oxygen sensors from automobile engines.
Wrenches

Wrench removes oxygen sensors from automobile engines.

Model SWR1 Oxygen Sensor Wrench facilitates removal and installation of hard-to-reach, 7/8 in. O2 sensors. Specifically adapted for accessing the O2 sensors of 5.4 and 4.6 liter modular engines, product eliminates need to loosen or remove other exhaust system components in order to access oxygen sensors. Unit has 10.75 in. overall length, steel construction, and chrome finish. Its 7/8-inch hex...

Read More »
Socket Set provides tight grip for spark plug changes.
Tool Sockets

Socket Set provides tight grip for spark plug changes.

Spark Plug Socket Set, Model 2005SPS features self-centering, tapered hex design that provides secure manipulation and release of spark plugs, while eliminating need for rubber inserts, magnets, or springs. Set includes 9/16 and 5/8 in. hex standard length sockets, as well as 5/8 in. hex universal retention socket. Six inch, quick-release locking extension provides extra reach, while medallion...

Read More »
Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary
Sponsored

Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary

For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.

Read More »

All Topics