Dual-Plane Line Laser projects over 360 degree range.
Lasers

Dual-Plane Line Laser projects over 360 degree range.

Able to project constant lines on vertical and horizontal planes, GLL2-80 is suited for alignment and leveling applications. Self-leveling device can be switched between dual-plane and vertical- or horizontal-only modes and employs proprietary Cone Mirror Technology, which reflects laser beam to project laser lines over 360° range. To work in bright light or cover distances to 265 ft, unit...

Read More »
Knockout Punch Driver cuts up to 2 in. conduit holes.
Hand / Tooling Punches

Knockout Punch Driver cuts up to 2 in. conduit holes.

Powered by 18 V Li-Ion battery, Model LS60L can punch hole for 2 in. conduit in 10-gauge mild steel and 12-gauge stainless steel in about 10 sec. Tool senses when hole is completely punched and automatically shuts off to prevent damage to punch and die. Forward handle position optimizes tool balance, and one trigger controls all tool functions. To illuminate dark areas, driver includes LED work...

Read More »
Blades

Pull Type Grader is available with 16 ft blade.

Agricultural 16 foot blade, offering 15° blade tilt for slop cuts and 42° blade angle with blade swing, features 15 in. ground clearance and 30 in. blade height. In addition to replaceable high carbon steel cutting edge, features include 4 hydraulic cylinders and hoses; 3 hydraulic tractor valves (angle, tilt, raise); and swivel hitch. Machine is supported by 11L x 15 tires, and...

Read More »
Reciprocating Saws are 19 in. long and weigh 7.3 lb.
Saws

Reciprocating Saws are 19 in. long and weigh 7.3 lb.

Powered by 12 A motor, SAWZALL® Recip Saw Model 6509-31 features 3/4 in. stroke length to provide control in tight areas, while Model 6519-31 has 1 1/8 in. stroke length for more aggressive cuts in heavy demolition. Both feature gear protecting clutch that extends gear and motor life by absorbing high impact forces and Quik-Lok® blade clamp for tool-free blade changes. Delivering...

Read More »
Cable, Pipe and Rebar Locators

Optical Visual Fault Locator features pen-style design.

Model 3105P optical visual fault locator enables fiber tracking, fiber routing, and continuity checking in optical networks. Unit detects faults in OTDR dead zone and finds breaks, poor connections, and bending/cracking in fiber optic cables. Supporting CW and pulse operating modes, 650 nm device is drop- and dust-resistant and offers low voltage warning. It includes laser case ground design to...

Read More »
Telephone Cable Fault Locator operates in two modes.
Cable, Pipe and Rebar Locators

Telephone Cable Fault Locator operates in two modes.

Integrating TDR and intelligent bridge testing functions into one unit, Model 98 examines patch cords, ribbons, and bunched pigtails. Unit performs measurements at distances up to 15 km, and can detect breaks and micro-bends, even in jacketed fibers. In pulse mode, locator tests for line breaks and mix, and in bridge mode, unit locates shorts and bad insulation. Operating continuously for up to...

Read More »
Heavy-Duty 6 in. Angle Grinder has auto-balanced design.
Tools

Heavy-Duty 6 in. Angle Grinder has auto-balanced design.

Employing 12.2 A motor for heavy duty cutting and grinding applications, WEPA14-150 Quick features auto-balance system that extends tool and wheel life while enhancing operational safety and comfort. Additional features, all electronic, include winding temperature monitor with LED display, soft start, and speed stabilization. Capable of achieving 9,000 rpm no-load speed, this 6.1 lb tool delivers...

Read More »
Plastic Pipe Fitting Reamers
Reamers

Plastic Pipe Fitting Reamers

Money-saving reamers are designed to clean out the solvent cement from a PVC fitting so the fitting can be reused. In this era of green living and recycling, try these reamers on PVC to save time and material costs. Plastic Pipe Fitting Reamers are available in 4 sizes from 1 Â-½ - 4" for Schedule 40 PVC. Reed Fitting Reamers feature a four-sided carbide insert on their cutting edge for...

Read More »
Reciprocating Saw Blade features double tang design.
Blades

Reciprocating Saw Blade features double tang design.

Designed for long blade life when cutting through cast iron, LENOX DIAMOND Double Tang reciprocating saw blade is constructed with industrial diamonds brazed to narrow blade edge. Double tang design allows users to flip blade so entire cutting edge can be utilized. Blade can also be used to cut fiberglass and ceramic tile, clay pipe, stone, brick, marble, plaster, cement siding board, and...

Read More »
Screw Driver offers 9 fastening functions.
Screwdrivers

Screw Driver offers 9 fastening functions.

Eliminating need for multiple drivers, 11 in 1 Screwdriver incorporates patented ECX(TM) bit that prevents bit wear from hardened screws and extends bit life when fastening specialty screws found in electrical boxes, conduit couplers, outlets, and other common job site fixtures. Fastening functions include #1 Phillips, #2 Phillips, Â-¼ and 3/16 in. slotted, #1 ECX(TM), #2 ECX(TM), and...

Read More »

All Topics