Carpet Cleaner targets auto detailing applications.
Cleaning Equipment

Carpet Cleaner targets auto detailing applications.

Equipped with 19-gal fluid tank for solution and 15-gal tank for recovery, 1,600 W XTreme Power® XPC-9200U provides pressure levels to 220 psi for large auto detailing and upholstery applications. Pair of 2-stage motors provides vacuum power of 200 cfm and water lift of 150 in. Machine is unheated for use on delicate fibers, but for applications requiring heat, users can add hot water up to...

Read More »
Pipe Cleaning Nozzles handle 0.5-1.5 in. dia tubes.
Nozzles

Pipe Cleaning Nozzles handle 0.5-1.5 in. dia tubes.

Enabling users to clean pipes and tubes with high-pressure water, Rotating Line Moles (RLM) feature operating pressures of 10,000 or 20,000 psi and are available with variety of flows and nozzle patterns. They polish ID of tubes/pipes as they clear them of hard deposits, even around bends, and come with left- or right-hand threads, and wrench flats for attachment to flex lance or rigid lance....

Read More »
Ply Separator splits as deep as 5 in. in one action.
Splicers

Ply Separator splits as deep as 5 in. in one action.

Available in workbench version and as splitter with its own stand, Novitool® PLY 130 cuts in between plies of conveyor belt, which is often required in preparation of splicing belt with splice press. Unit can prepare finger over finger splices as well as stepped splices. For safety, machine is provided with one electrical switch for on, off, and reversed operation, and foot pedal for...

Read More »
Heavy-Duty Swing Clamps can be mounted in space-limited areas.
Clamps

Heavy-Duty Swing Clamps can be mounted in space-limited areas.

Available in 2 sizes, heavy-duty swing clamps have max operating pressure of 5,000 psi and are designed specifically for space-saving manifold mounting. Double acting, top-flange, cartridge-type clamps, featuring swing mechanism for accelerated clamping cycles, are also suitable when using longer, heavier custom arms. Position monitoring is available as option.

Read More »
Underground Rock Drills are built for low-noise operation.
Drills

Underground Rock Drills are built for low-noise operation.

Model BBC 16 WS, BBD 34 WS, and BBD 94 WE are silenced light rock drills, intended for underground applications, that full comply with ATEX directive. Together with BMK 91RS pusher leg, BBD 94 WS model passes entire process according to directive 94/9/EC, while heavy duty stopers BBC 34 WS6 and BBC 34 WS8 are designed for tough working conditions in drilling, raise driving, and bolting...

Read More »
Shears

New Harris SC Shear Purchased by Sadoff Iron and Metal Company

Peachtree City, GA, May 28, 2010: Harris is pleased to announce that Sadoff Iron and Metal Company, a division of Sadoff & Rudoy Industries, LLP, has placed an order for a new Harris SC Shear. Sadoff revealed their plans for the shear in May at the ISRI show in San Diego and will install the shear in their Fond du Lac, Wisconsin operation. The new Harris SC shear is a state-of-the-art design that...

Read More »
Carpet Extractors

Unheated Carpet Cleaner provides 220 psi pump pressure.

Featuring unheated design, 60 Hz XTreme Power® XPC-9200 is suitable for use on delicate fibers that may be sensitive to high heating temperatures. Unit offers 200 cfm of airflow, 17-gal solution capacity, and 15-gal extraction tank for extended periods of high-intensity cleaning. Vacuum subsystem is powered by pair of 2-stage motors. For jobs requiring heat, carpet extractor can accept...

Read More »
Sandvik Coromant to Showcase a Wide Variety of Tooling Innovation at IMTS 2010
Other Milling Cutters

Sandvik Coromant to Showcase a Wide Variety of Tooling Innovation at IMTS 2010

Under the theme The Road to Success Starts Here," Sandvik Coromant will be showcasing a broad range of tools at IMTS 2010. With new solutions for an incredible variety of machining applications, the company will be located in booth #W-1500 at the trade show, which is held September 13 - 18 at McCormick Place in Chicago, Illinois. To meet growing demand from the aerospace sector for reliable and...

Read More »
Retractable Power Cord Reels accommodate 10-50 ft of cord.
Reels

Retractable Power Cord Reels accommodate 10-50 ft of cord.

Rated NEMA 4 for wet or dry locations, ORB Series is available in custom configurations by cord type, length, and pre-wired options. Units feature heavy-duty steel construction, 4-roller cable guide, and positive-lock ratchet or constant-tension payout. Available with SOOW or SJOW power cable, reels come in 15 A model with 16 AWG cord, 15 A model with 14 AWG cord, or 20 A model with 12 AWG cord.

Read More »
Wet Abrasive Saw features 2,300 rpm spindle speed.
Saws

Wet Abrasive Saw features 2,300 rpm spindle speed.

Measuring 36 x 26 x 62 in., Model K10SW 10-in. wet abrasive saw is available with single-phase 220 V or 3-phase 220/440 V, 3 hp motors, both operating at 3,450 rpm. Standard features include magnetic switch, heavy-duty cast iron base and trunnion, 5/8 in. spindle arbor, cam lock vise, and 10 gal coolant tank with pump and splash guard. Available options include 1Â-¼ in. spindle arbor, PH-14...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics