Air Gun delivers 23 lb of blowing force.

Air Gun delivers 23 lb of blowing force.

Suited for long-distance and wide-area blowoff, drying, and cooling applications, Super Blast Safety Air Gun incorporates one Super Air Nozzle that is engineered to optimize entrained airflow and force while minimizing compressed air use and noise. Air consumption is 460 scfm at full pressure of 80 psig, and 7 other sizes with single or multiple Super Air Nozzle configurations are available that...

Read More »
Automation System produces cable assemblies.

Automation System produces cable assemblies.

Built from modular components, TransferModule 6000 includes cable transport system, transfer shuttles, transfer chain, cable loading/unloading stations, control system, and PC-based user interface. Stations can perform stripping, tinning, sealing, shield flaring, and micro-flame soldering, as well as ultrasonic and resistance welding, connector housing insertion, and electrical testing. Typical...

Read More »

DuPont Microcircuit Materials and CAD Design Software Integrate LTCC Materials and Processes in CDS Ceramic Design Software to Speed Design

Research Triangle Park, N.C. and San Jose, Calif., March 5, 2009- DuPont Microcircuit Materials (MCM), part of DuPont Electronic Technologies, and CAD Design Software have announced the integration of DuPont(TM) GreenTape(TM) low temperature co-fired ceramic (LTCC) materials and manufacturing processes into CAD Design Software's Electronic Design Automation (EDA) design tools for Ceramic...

Read More »
Romi to Show off M20 Combination Lathe at Eastec

Romi to Show off M20 Combination Lathe at Eastec

Erlanger, KY-Romi Machine Tools Ltd. will display one of its mid-sized Combination Lathes, the M20 x 60 at the Eastec Advanced Productivity Exposition, May 19-21 in West Springfield, MA. Romi will be exhibiting in their New England distributor's booth (Northeast CNC) in Booth #1460. The M20 features a 15 hp spindle motor and a 20.4 swing over the bed, 10.25 swing over cross slide. Bed lengths of...

Read More »
Belt Sander/Grinder provides motor speed of 3,600 rpm.

Belt Sander/Grinder provides motor speed of 3,600 rpm.

Providing over 5,000 fpm of belt speed, Belt Sander/Grinder 602E-MT has front contact wheel that can be used to grind, sand, shape, and polish flat and curved surfaces with smooth, fast cutting and less heat. Unit's 2 x 36 in. belt can be swiveled vertically or into any other position, while it's miter table tilts from 5-50-° downward. Unit is supplied with 100 grit sand belt, 6 in. 0.014 ga...

Read More »
Centrifuge provides cleaning force of 350 G.

Centrifuge provides cleaning force of 350 G.

Targeting small parts manufacturers, 601 VersaFuge is designed for fluid cleaning, chip wringing, sludge drying, parts cleaning, and washing and drying. It has chip or swarf handling capacity of 130 lb/load for batch fluid reclamation, while it's 10 gal bowl provides fluid reclamation for process lubrication and cooling systems. Unit can be integrated into any shop for batch, fluid, or parts...

Read More »
Solid Carbide Drill works with extra-hard materials.

Solid Carbide Drill works with extra-hard materials.

Phoenix drill series includes 3xD and 12xD sizes, available in diameters from 1-12.7 mm in .1 mm increments, with coolant through from 2.5 mm and Helica coating. While specially designed flute and point geometry minimize cutting forces and optimize chip control, ultra-fine grain composition delivers wear resistance and toughness to accommodate higher speeds and feeds. Internal coolant makes tools...

Read More »

Powered Duct Rod Pusher minimizes strain of cable placement.

Offering mechanized method for working with Â-½ in. duct rods, hydraulically powered Duct Rod Pusher can push and pull forces up to 300 lb while moving at speeds up to 130 fpm. System comes with gasoline-driven power pack and hoses and is mounted on corrosion-resistant steel frame, which can be tilted at 30Â-

Read More »

Indexable Drill also performs turning and boring operations.

Designed for large diameter hole drilling, WDX Series has nickel-plated steel body that accepts same insert geometry for both outer and inner cutting edges, allowing use of all four of insert's cutting edges. Featuring Super ZX-coated carbide insert grades ACP300 and ACK300, unit machines wide range of steels, stainless steels, cast irons, and exotic materials. Drill is available in coolant...

Read More »
Manual Rivet Tool Kit handles most common repairs.

Manual Rivet Tool Kit handles most common repairs.

Professional-grade 265-piece POPSetÂ-® PS15 includes PS15 plier style hand tool with rivet retention feature, allowing tool to be used one-handed and in any position without rivet disengaging from nosepiece prior to setting. Tool sets aluminum rivets up to 3/16 in. and steel rivets up to 5/32 in. body diameter. Kit also contains 8 different rivet varieties in multiple sizes and materials,...

Read More »

All Topics