MIG Guns are built for extended use.
Built-to-order, semi-automatic TOUGH GUN(TM) MIG Guns come in air- and water-cooled models with respective capacities of 350-650 A and 400-600 A. While air-cooled versions include aircraft-grade aluminum armored gooseneck, water-cooled guns feature stainless steel gooseneck. Both types integrate cable strain relief on both ends, TOUGH LOCK(TM) Contact Tips for extended wear life, and QUICK...
Read More »
Snap-on has Two Cool Tools at Very Hot Prices
KENOSHA, Wis. - February 23, 2009 - For a limited time only, Snap-on is offering two of its coolest tools, the 7.2 Volt Cordless Screwdriver (CTS561) and 7.2 Volt Cordless Screwdriver with Clutch (CTS561CLH), at incredibly hot prices. Because of the popularity of our 7.2 Volt Cordless Screwdriver, we wanted to give our customers this great opportunity to save when they purchase one for themselves...
Read More »Cut and Strip Tool is self adjustable.
With ability to strip wires with insulation types from PVC to PTFE, cut-and-strip tool cuts stranded wires up to 8 AWG and solid wires up to 16 AWG. It removes insulation from copper/fiber optic audiovisual, data transmission, instrumentation, signal, and telephone cables up to 11 mm and insulation up to 1 mm. Other features included are replacement blade and jaw inserts, interchangeable...
Read More »The CIMtek Group Partners with Dieterle, Europe's Swiss Tooling Leader, and Introduces Their High Performance Swiss Tooling to North America
Elgin, IL - (February 17, 2009) High performance Swiss tooling from Dieterle, Europe's industry-leader, is now available in North America exclusively from the importer, The CIMtek Group. While many competitors offer limited product groups for Swiss Tooling, Dieterle boasts one of the most comprehensive lines of high quality, high performance Swiss tooling from stock including a full range of...
Read More »
Distillation 101: A Guide to Distillation and Separation Technologies
Distillation is a separation unit operation that involves multiple countercurrent-stage steps, separating two or more volatile components. This results in the contact of liquid and vapor most generally in counterflow. Distillation 101: A Guide to Distillation and Separation Technologies provides an in-depth look at everything you need to know about distillation, including: Design procedures Equipment components Applications
Read More »
A & E Hand Tools Introduces the Brake Caliper Bit Set
Racine, WI - (January 15, 2009)- A & E Hand Tools would like to introduce their new Brake Caliper Bit Set (Part no. 5459) under the Kastar Hand Tools brand. This set is used for removing and/or installing fasteners on automotive brake calipers. The set consists of an adapter with a 3/8 square drive, a magnetic 5/16 6-point drive, and ten bits- 6-Point- 1/4 , 3/8 , 7mm, 8mm (5/16 ), 10mm;...
Read More »
A & E Hand Tools Introduces the 9/16 Extra Long Automatic Slack Adjuster Wrench
Racine, WI - (January 15, 2009)- A & E Hand Tools would like to introduce their new 9/16 Extra Long Automatic Slack Adjuster Wrench (Part no. 8569) under the Kastar Hand Tools brand. This specialty wrench is used for brake service and slack adjuster installation on heavy-duty trucks equipped with BendixÃ-® automatic slack adjusters. Used to turn the manual adjuster hex. Extra deep hex allows...
Read More »Cutting/Stripping Tools accommodate wide wire/cable range.
Able to cut flexible wires up to 8 AWG and rigid wires up to 16 AWG, self-adjusting cut-and-strip tool accepts interchangeable stripping cassettes for stripping insulation types from PVC to PTFE. Also available, cable stripping tool removes insulation from copper and fiber optic audio-visual, data transmission, instrumentation, signal, and telephone cables up to 11 mm and insulation up to 1 mm....
Read More »
Thermal Dynamics Announces New XTR Robotic Torch
St. Louis, MO (February 3, 2009) - Thermal Dynamics, the leading producer of manual and automated plasma cutting systems, is pleased to announce the introduction of the new XTR Robotic Torch from Thermal Dynamics. This torch is specifically designed for use with the Thermal Dynamics Ultra-Cut 100/200/300 precision plasma cutting systems for robotic and bevel cutting applications. The sleek...
Read More »
A & E Hand Tools Introduces the New Rocker Arm Adjustment Tool for Harley-Davidson-® Springer-® Motorcycles
Racine, WI - (January 15, 2009)- A & E Hand Tools would like to introduce their new Rocker Arm Adjustment Tool for Harley-DavidsonÃ-® SpringerÃ-® motorcycles (Part no. 469) under the Kastar Hand Tools brand. This tool is used to adjust the rocker arm nut to allow for proper rocker arm endplay on SpringerÃ-® Harley-DavidsonÃ-® motorcycles. Features simple, one-person, operation...
Read More »
A & E Hand Tools Introduces the New Clutch Master Cylinder Pin Press
Racine, WI - (January 15, 2009)- A & E Hand Tools would like to introduce their new Clutch Master Cylinder Pin Press (Part no. 475A) under the Kastar Hand Tools brand. This tool is used to press out the roll pin that retains the hydraulic line to the clutch master cylinder or the clutch slave cylinder on domestic vehicles with manual transmissions. The Clutch Master Cylinder Pin Press allows...
Read More »
What Can Test Devices Spin for You?
Test Devices helps you ensure the safety and efficiency of your high performance machines with cutting edge spin testing, rotor engineering, and precision balancing capabilities. Check out the video to learn more.
Read More »
